| 机电一体化粉体精密计量装置及控制系统的设计 |
| |
| 引用本文： | 宫跃文,戴莺莺,冯连勋.机电一体化粉体精密计量装置及控制系统的设计[J].机电工程技术,2005,34(2):45-47. |
| |
| 作者姓名： | 宫跃文 戴莺莺 冯连勋 |
| |
| 作者单位： | 北京化工大学机电工程学院,北京,100029 |
| |
| 摘 要： | 本文介绍了以PLC（可编程控制器）为核心的计量装置及控制系统的设计。利用PLC发送脉冲，驱动步进电机，带动螺旋输送器的转动，使粉体物料落入电子天平的托盘中；同时电子天平发出关于粉体质量的反馈信号给PLC，PLC根据粉体质量的变化高速脉冲的发了频率以控制步进电机的转速，进而控制粉体的输出质量。当粉体质量达到规定的质量时，步进电机停转，最终使粉体质量满足要求，并且把误差控制在极小的范围内。
|
| 关 键 词： | 可编程序控制器 电子天平 步进电机 |
| 文章编号： | 1009-9492(2005)02-0045-03 |
| 修稿时间： | 2004年7月21日 |
A design of the electromechanics integrating on the precise computation equipment of powder and control system |
| |
| GONG Yue-wen,DAI Ying-ying,FENG Lian-xun.A design of the electromechanics integrating on the precise computation equipment of powder and control system[J].Mechanical & Electrical Engineering Technology,2005,34(2):45-47. |
| |
| Authors: | GONG Yue-wen DAI Ying-ying FENG Lian-xun |
| |
| Abstract: | This text has introduced the designs of the computation equipment and control system taking PLC as the core. The system sends out the pulse through PLC,drives the step-motor and making the screw-sending device rotary,and pushes the powder in the tray of the electronic scale. At the same time the electronic scale sends out the feedback signal on the weight of the powder to PLC according to the weight of the powder,the PLC control the rotating speed of the step-motor through adjusting its frequency of pulse,and then control the output weight of the powder. When the powder has been fit the required weight,the step-motor stops and making the tolerant of the weight in extremely small range. |
| |
| Keywords: | PLC electronic scale step-motor |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
