| 在石墨坩埚电弧炉中制备大块非晶合金 |
| |
| 引用本文： | 陈德民,梁立孚,孙剑飞,沈军.在石墨坩埚电弧炉中制备大块非晶合金[J].特种铸造及有色合金,2003(1):12-13. |
| |
| 作者姓名： | 陈德民 梁立孚 孙剑飞 沈军 |
| |
| 作者单位： | 1. 哈尔滨工程大学
2. 哈尔滨工业大学 |
| |
| 摘 要： | 通过对水冷锅坩埚电弧熔炼吸注成型工艺制备大块非晶过程中不利因素的分析，采用该工艺获得了直径达20mm的锆基大块非晶棒材，试验表明，采用石墨坩埚熔炼可以进一步提高熔炼过程中温度和成分的均匀性，并改善有利于非晶形成的冷却条件。
|
| 关 键 词： | 电弧炉 制备 石墨坩埚 大块非晶合金 非晶形成能力 |
| 文章编号： | 1001-2449(2003)01-0012-02 |
| 修稿时间： | 2002年4月15日 |
Prejparation of Bulk Amorphous Alloy by Electric ArcFurnace with Graphite Crucible |
| |
| Chen Demin,Liang Lifu.Prejparation of Bulk Amorphous Alloy by Electric ArcFurnace with Graphite Crucible[J].Special Casting & Nonferrous Alloys,2003(1):12-13. |
| |
| Authors: | Chen Demin Liang Lifu |
| |
| Abstract: | Preparation of Zr base bulk amorphous alloy rod up to 20mm diameter in electric arc furnace with graphite crucible was performed for replacement in arc furnace with water cooled crucible by suction pouring forming. The results showed that the temperature and composition are more homogenous in the molten alloy by smelting in graphite crucible, and the cooling conditions favorable to glass-forming are consequently improved. |
| |
| Keywords: | Graphite Crucible Bulk Amorphous Alloy Glass Forming Ability |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
