| 小型H型钢粗轧过程数值模拟及翼缘宽展分析 |
| |
| 引用本文： | 裴暖暖,朱国明,张思勋,康永林.小型H型钢粗轧过程数值模拟及翼缘宽展分析[J].钢铁研究学报,2014,26(9):37-40. |
| |
| 作者姓名： | 裴暖暖 朱国明 张思勋 康永林 |
| |
| 作者单位： | 1. 北京科技大学材料科学与工程学院, 北京 100083 2. 莱芜钢铁集团有限公司技术中心, 山东 莱芜 271104 |
| |
| 摘 要： | 运用有限元方法对4种规格小型H型钢的粗轧过程进行了三维热力耦合数值模拟,详细介绍了有限元模型和模拟参数设置。在数值模拟结果的基础上,分析了小型H型钢各道次稳定轧制阶段的孔型填充状况、有效塑性应变和翼缘宽展规律。根据推导的小型H型钢斜配孔型翼缘宽展公式计算了各道次翼缘高度解析结果,并将翼缘高度解析结果、数值模拟结果和实测结果进行了对比,规律性吻合较好。
|
| 关 键 词： | 小型H型钢 数值模拟 孔型填充 塑性应变 翼缘宽展 |
Numerical Simulation and Flange Spread Analysis for Rough Rolling Process of Small Size H-Beam |
| |
| PEI Nuan-nuan,ZHU Guo-ming,ZHANG Si-xun,KANG Yong-lin.Numerical Simulation and Flange Spread Analysis for Rough Rolling Process of Small Size H-Beam[J].Journal of Iron and Steel Research,2014,26(9):37-40. |
| |
| Authors: | PEI Nuan-nuan ZHU Guo-ming ZHANG Si-xun KANG Yong-lin |
| |
| Affiliation: | 1. School of Material Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China ;2. Technical Center, Laiwu Steel Co. , Ltd. , Laiwu 271104, Shandong, China |
| |
| Abstract: | 3D thermo-mechanical coupled simulation of rough rolling process for four kinds of small size H-beam was accomplished by FEM method. The finite element model and parameter setting were introduced in detail. Then based on simulation results, groove filling degree, effective plastic strain and flange spread law of each pass stable rolling stage for small size H-beam were analyzed. According to flange spread formula of oblique groove for small size H-beam, analytical results of flange height for each pass were obtained. In addition, analytical results, simulation results and measured results of flange height were compared, and the regularity was in good agreement. |
| |
| Keywords: | small size H-beam numerical simulation groove filling degree plastic strain flange spread |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《钢铁研究学报》浏览原始摘要信息 |
|
点击此处可从《钢铁研究学报》下载全文 |
|
