|
|||||
|
|
| 不同脱氧条件下弹簧钢非金属夹杂物尺寸分布 | |
| 引用本文： | 薛正良,李正邦,张家雯,杨武,王玉,甘朝福.不同脱氧条件下弹簧钢非金属夹杂物尺寸分布[J].钢铁,2001,36(12):19-22. |
| 作者姓名： | 薛正良 李正邦 张家雯 杨武 王玉 甘朝福 |
| 作者单位： | 1. 钢铁研究总院 2. 江苏淮钢集团公司 3. 重庆特殊钢公司 |
| 基金项目： | 国家自然科学基金资助项目 ( 5 98740 2 3) |
| 摘 要： | 在工业生产条件下采用3种脱氧和精炼工艺生产弹簧钢60Si2MnA，用四甲基氯化铵溶液电解萃取法从热轧弹簧钢棒材试样中萃取出非金属夹杂物，用扫描电镜和图象分析仪等检测非金属夹杂物形貌和尺寸分布。研究表明，采用连铸法较采用模铸法能大大降低大型夹杂的尺寸的数量。 |
| 关 键 词： | 弹簧钢 脱氧 非金属夹杂物 尺寸分布 炼钢 |
SIZE DISTRIBUTION OF NON-METALLIC INCLUSIONS IN SPRING STEEL PRODUCED BY DIFFERENT DEOXIDATION PROCESSES |
|
| XUE Zhengliang,LI Zhengbang,ZHANG Jiawen.SIZE DISTRIBUTION OF NON-METALLIC INCLUSIONS IN SPRING STEEL PRODUCED BY DIFFERENT DEOXIDATION PROCESSES[J].Iron & Steel,2001,36(12):19-22. | |
| Authors: | XUE Zhengliang LI Zhengbang ZHANG Jiawen |
| Abstract: | Three deoxidation and refining processes to produce spring steel 60Si2MnA have been used in production. Non metallic inclusions in hot rolled spring steel rods were electrolytically extracted with quartermethy1 ammonium chloride solution, then the morphology and the size distribution of non metallic inclusions were observed by SEM and image analyzer. The results show that the continuous casting process could largely reduce the size and amount of large inclusions comparing with ingot casting. |
| Keywords: | spring steel deoxidation process non metallic inclusion size distribution |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
