| 截断切割模型 |
| |
| 引用本文： | 梁先映,陈杰,黄苏裕.截断切割模型[J].湖南工业大学学报,1998(2). |
| |
| 作者姓名： | 梁先映 陈杰 黄苏裕 |
| |
| 作者单位： | 株洲工学院!株洲412008 |
| |
| 摘 要： | 讨论关于材料截断切割加工时最优加工次序的选择问题。先分析得出切割方式的总数，再对参数R、E进行分析，建立了模型（一）、模型（二）和模型（三）；证明了模型（二）为E＝0时的最优化模型，并得出简明优化准则；分析讨论了以模型（三）来确定E≠0时的最优次序；经编程计算对各模型进行了验证、比较，并介绍了推广应用的范围。
|
| 关 键 词： | 模型 最小费用 最优加工次序 准则 |
Shear Cutting Mould |
| |
| Liang Xianying, Chen Jie, Huang Shuyu.Shear Cutting Mould[J].Journal of Hnnnan University of Technology,1998(2). |
| |
| Authors: | Liang Xianying Chen Jie Huang Shuyu |
| |
| Abstract: | A discussion is given on the most optimizing process at cutting the material shear. An analysis is made on the summation,the parameter R,E modell,model 2,and model 3 are got. It is proved that model 2 is the best when E=O and the simple principle of optimality. A discussion is offered on the majorizing seguence when E=O by model 3,the test by program counting and its applied fields. |
| |
| Keywords: | model low cost the best process sequence criterion |
| 本文献已被 CNKI 等数据库收录！ |
|
