首页 | 官方网站   微博 | 高级检索  
     

承压堵漏技术在AT16井的应用
引用本文:田磊,刘涛,李颖潇.承压堵漏技术在AT16井的应用[J].辽宁化工,2012,41(10):1032-1033,1036.
作者姓名:田磊  刘涛  李颖潇
作者单位:1. 西安石油大学石油工程学院,陕西西安,710065
2. 陕西延长石油(集团)有限责任公司延安炼油厂,陕西延安,124010
摘    要:AT16井是位于沙雅隆起阿克库勒凸起东南斜坡带的一口探井,该井在石炭系巴楚组钻遇长达261 m(5 057~5 318 m井段)的盐膏层段.由于该井盐上地层为长裸眼段,地层压力系数低,易漏,因此钻进至井深5000m时,应使用承压堵漏工艺技术对井身5000m以上的裸眼段进行先期堵漏,使地层承压能力提高,为盐膏层顺利钻进提供保障.本文对此次承压堵漏进行了分析,提出了自己的一些认识和建议.

关 键 词:承压堵漏  堵漏配方  地层压力  钻井液

Application of Mud Loss Control Under Pressure in AT16 Well
TIAN Lei , LIU Tao , LI Ying-xiao.Application of Mud Loss Control Under Pressure in AT16 Well[J].Liaoning Chemical Industry,2012,41(10):1032-1033,1036.
Authors:TIAN Lei  LIU Tao  LI Ying-xiao
Affiliation:1.Xi’an Shiyou University,Shanxi Xi’an 710065,China;2.Shaanxi Yanchang Petroleum(Group) Co.Ltd.,Yan’an Refinery,Shaanxi Yan’an 124010,China)
Abstract:AT16 well is a prospected well in the bossy southeast ramp region of Shaya Akekule uplift.A 261m long(5057~5318m) carbonate zone is encountered while drilling a long open hole at Bachu area in carboniferous system.Formation over carbonate zone of AT16 Well is an open hole section,and its reservoir pressure coefficient is low,it’s easy to lost circulation,so mud loss control under pressure should be used to plug open-hole formation while drilling well depth is over 5 000 m in order to improve formation pressure ability and supply support for smoothly drilling in carbonate zone.In this paper,the technology process of mud loss control under pressures was analyzed,and some suggestions were put forward.
Keywords:mud loss control under pressures  mud formulation for mud loss control  formation pressure  drilling fluid
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号