首页 | 官方网站   微博 | 高级检索  
     

碳纤维表面化学涂覆NiO
引用本文:华中胜,姚广春,曹卓坤,王磊,马佳,梁李斯.碳纤维表面化学涂覆NiO[J].过程工程学报,2009,9(3):580-585.
作者姓名:华中胜  姚广春  曹卓坤  王磊  马佳  梁李斯
作者单位:东北大学教育部材料先进制备技术工程研究中心,辽宁,沈阳,110004
基金项目:国家自然科学基金重点项目 
摘    要:采用均相沉淀法在碳纤维表面进行了NiO涂覆,研究了沉淀剂种类、脱水方式、沉淀剂浓度、沉淀剂添加速度和沉积反应时间对涂覆效果的影响. 采用SEM和XRD对涂层进行了表征,得到了制备NiO涂层较为合适的工艺条件为:以尿素为沉淀剂,采取缓慢升温的方式脱水,沉淀剂浓度0.20 mol/L,沉淀剂滴加速度2 mL/min,反应时间120 min. 在此条件下制备的NiO涂层厚度均匀,无脱落现象. 抗氧化性测试结果表明,涂覆NiO涂层后,碳纤维的抗氧化性有明显的提高.

关 键 词:碳纤维  均相沉淀法  涂层  NiO
收稿时间:2008-12-22
修稿时间:2009-3-13

Chemical Deposition of NiO on Carbon Fibers
HUA Zhong-sheng,YAO Guang-chun,CAO Zhuo-kun,WANG Lei,MA Jia,LIANG Li-si.Chemical Deposition of NiO on Carbon Fibers[J].Chinese Journal of Process Engineering,2009,9(3):580-585.
Authors:HUA Zhong-sheng  YAO Guang-chun  CAO Zhuo-kun  WANG Lei  MA Jia  LIANG Li-si
Affiliation:Advanced Material Preparing Technology Engineering Research Center of Education Ministry;Northeastern University;Shenyang;Liaoning 110004;China
Abstract:NiO was deposited on carbon fibers by homogeneous precipitation method. The influences of precipitation agents, dehydration method, precipitator concentration, addition speed of precipitator and deposition time on depositing were examined. NiO coating was characterized by SEM and XRD. Proper process conditions of NiO depositing on carbon fibers were obtained as follows: urea as the precipitator, Ni(OH)2 dehydrated by slow heating method, the precipitator concentration at 0.20 mol/L, addition speed of precip...
Keywords:NiO
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《过程工程学报》浏览原始摘要信息
点击此处可从《过程工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号