首页 | 官方网站   微博 | 高级检索  
     

化学镀镍液中硫酸镍与次磷酸钠的快速测定
引用本文:徐启文,吴源清,黄岳山,赵修华.化学镀镍液中硫酸镍与次磷酸钠的快速测定[J].电镀与精饰,2004,26(1):31-33.
作者姓名:徐启文  吴源清  黄岳山  赵修华
作者单位:华南理工大学,生物力学研究所,广东,广州,510641
基金项目:广东省自然科学基金资助项目 (0 2 0 832 ),广州市重点科技攻关项目 (2 0 0 0 - Z- 0 18- 0 1)
摘    要:采用光度分析方法研究化学镀镍过程中硫酸镍及次磷酸钠质量浓度的快速测定,建立了标准硫酸镍及标准次磷酸钠质量浓度与吸光度回归方程。对比试验表明,镀液测定的标准偏差小于4%,与化学分析标准法相比,其偏差可控制在6%左右。本法适用于快速检测镀液中主成分含量的变化。

关 键 词:化学镀镍  硫酸镍  次磷酸钠  快速测定  分光光度法
文章编号:1001-3849(2004)01-0031-03
修稿时间:2003年3月28日

Rapid Determination of Nickel Sulfate and Sodium Hypophosphite in Electroless Nickel Plating Bath
XU Qi-wen,WU Yuan-qing,HUANG Yue-shan,ZHAO Xiu-hua.Rapid Determination of Nickel Sulfate and Sodium Hypophosphite in Electroless Nickel Plating Bath[J].Plating & Finishing,2004,26(1):31-33.
Authors:XU Qi-wen  WU Yuan-qing  HUANG Yue-shan  ZHAO Xiu-hua
Abstract:Rapid determination of nickel sulfate and sodium hypophosphite in electroless nickel plating bath was investigated using spectrophotometry. The regression equations of the relationship between absorbance and nickel sulfate concentration, and between absorbance and sodium hypophosphite concentration in the standard solutions were established. Experimental results of comparison test show that the standard deviation of determiantion of the spectrophotometric method for plating bath is less than 4%, and it can be controlled in about 6% as compared with the standard method of chemical analysis. The method is suitable for rapid determining the change of main components in the plating bath.
Keywords:electroless nickel plating  nickel sulfate  sodium hypophosphite  rapid determination
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号