阶梯轴类零件激光在机测量误差补偿研究

轴类零件主要用来传递转矩和承受载荷,常通过数控车床加工而成其精度要求高,可用激光位移传感器对其轮廓信息进行采集,但由于机床存在位置及运动误差等,使得在机测量精度较低。因此为提高测量精度,提出面向阶梯轴类零件激光测量的实时误差补偿算法,并分别对补偿前后台阶测量点云进行模型重构,对比分析其测量误差。对比分析结果验证了补偿算法的有效性。台阶面测量表明,经几何关系修正后,其平面测量误差与三坐标测量结果差值为0.002 mm,证明测量拟合精度高。

Research on Error Compensation for Laser On-machine Measurement of Stepped Shaft Part

Shaft parts are mainly used to transfer torque and bear load and machined by numerical control lathe.Their accuracy needs to be high.A laser displacement sensor is adopted in collecting the profile information,but the measurement accuracy can’t satisfy the demand due to the location and motion errors of lathes.To improve the accuracy,a real-time error compensation algorithm for the stepped shaft part is proposed.The measured point clouds before and after compensation are imported into software respectively to reconstruct the models,which are used to compare and analyze the measuring errors.The results show that the effectiveness of the compensation method is verified.After the correction based on the geometric relationship,the error of the step plane is close to the result of CMM and the high precision of the laser on-machine measurement is proved.