|
|||||
|
|
| 内复合换热管与复合管板焊接工艺试验研究 | |
| 引用本文： | 李多民,刘小辉,陈孙艺.内复合换热管与复合管板焊接工艺试验研究[J].现代制造工程,2006(4):85-87. |
| 作者姓名： | 李多民 刘小辉 陈孙艺 |
| 作者单位： | 1. 茂名学院机电工程学院,茂名525000 2. 中国石油化工股份有限公司茂名分公司设备监测研究中心,茂名525011 3. 中国石化茂名石化机械厂,茂名,525024 |
| 摘 要： | 介绍复合管与复合管板的管头设计及其焊接试验,结果表明,如果管内壁不锈钢复合层的厚度达到或大于0.5mm,则管头的焊接质量能满足要求,否则管头焊缝容易开裂。内、外双面复合管和复合管板的管头焊接工艺,与仅有内壁单层不锈钢复合层的复合管和复合管板的管头焊接工艺相同。 |
| 关 键 词： | 管束 复合管 焊接 |
| 文章编号： | 1671-3133(2006)04-0085-03 |
| 修稿时间： | 2005年11月1日 |
Fabrication technology of clad tube inside corrosion resisting and its welding experiment of tube to clad tubesheet |
|
| Li Doumin,Liu Xiaohui,Chen Sunyi.Fabrication technology of clad tube inside corrosion resisting and its welding experiment of tube to clad tubesheet[J].Modern Manufacturing Engineering,2006(4):85-87. | |
| Authors: | Li Doumin Liu Xiaohui Chen Sunyi |
| Abstract: | Six(6)kinds fabrication technology of clad tube which inside corrosion resisting and the jointing structure of tube to clad tubesheet are introduced.The results of its welding experiment are show that the weld quality is good if the clad thick is equal or greater than 0.5mm,and the welding process would be the same when the two clad tube be joint to clad tubesheet which both inside and out outside has clad. |
| Keywords: | Bundle Tube Welding |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |
