机械合金化Cu-Cr合金在0.1MPa纯氧气中的氧化 |
| |
引用本文: | 付广艳,牛焱,王崇琳,管恒荣.机械合金化Cu-Cr合金在0.1MPa纯氧气中的氧化[J].中国腐蚀与防护学报,2000,20(5):269-273. |
| |
作者姓名: | 付广艳 牛焱 王崇琳 管恒荣 |
| |
作者单位: | 1. 中国科学院金属研究所 金属腐蚀与防护国家重点实验室 沈阳 110015;沈阳化工学院机械工程系 沈阳 110021 2. 中国科学院金属研究所 金属腐蚀与防护国家重点实验室 沈阳 110015 |
| |
基金项目: | 国家自然科学基金资助(No.59871050和No.59725101) |
| |
摘 要: | 采用机械合金化法制备了两相颗粒极细的Cu-Cr与Cu-40Cr合金,研究其在700 ̄800℃,0.1MPa纯氧气中的氧化。MACu-20Cr及MACu-40Cr合金24h氧化后均形成了连续的Cr2O3层,这主要由于两相颗粒的细化,加快了Cr颗粒的溶解,缩短了Cr的扩散距离,从而有效地促进Cr2O3层的形成。
|
关 键 词: | 机械合金化 Cu-Cr合金 氧化 0.1MPa纯氧气 |
文章编号: | 1005-4537(2000)05-0269-06 |
修稿时间: | 1999年8月23日 |
OXIDATION OF MECHANICALLYALLOYED Cu-Cr ALLOYS IN 0.1 MPa O2 |
| |
Abstract: | The oxidation behavior of Cu-Cr alloys with Cr concentrations 20% (mass) (MACu-20Cr) and40 % (MACu-40Cr) was studied in 0.1 MPa C2 at 700 ~ 800℃. The Cu-Cr alloys were prepared bymechanical alloying, presenting a much smaller particle size of phases. Both MA Cu-20Cr of MACu-40Crformed a continuous Cr2O3 layer. The result is connected with the fact that the smaller Cr-rich particlesdissolve rore rapidly, have short diffusion distance between Cr-rich phase particles, and can provide afaster supply of Cr to the external Cr2O3 scales with respect to larger particles. |
| |
Keywords: | mechanical alloying Cu-Cr alloy oxidation |
本文献已被 维普 万方数据 等数据库收录! |