| 不饱和聚酯树脂生产废水处理工程实例 |
| |
| 引用本文： | 刘木权,冯志坚,朱月琪.不饱和聚酯树脂生产废水处理工程实例[J].广东化工,2011,38(1):154-155,159. |
| |
| 作者姓名： | 刘木权 冯志坚 朱月琪 |
| |
| 作者单位： | 刘木权,Liu Muquan(潮州市环境保护监测站,广东,潮州,521011);冯志坚,朱月琪,Feng Zhijian,Zhu Yueqi(广州市金龙峰环保工程设备有限公司,广东,广州,510000) |
| |
| 摘 要： | 文章介绍了不饱和聚酯树脂生产废水的处理方法。将厂区生活污水与生产废水混合处理，二者水量之比约为3：1。生活污水一部分进入混台池与生产废水进行混合；另一部分作为补给氮源直接进入好氧池。经气浮处理后的生产废水与生活污水混合后，采用厌氧-好氧．气浮-碳滤的组合工艺进行处理。经处理后的废水达标排放。
|
| 关 键 词： | 气浮 厌氧池 曝气池 |
Wastewater Treatment Project of Unsaturated Polyester Resin Production |
| |
| Liu Muquan,Feng Zhijian,Zhu Yueqi.Wastewater Treatment Project of Unsaturated Polyester Resin Production[J].Guangdong Chemical Industry,2011,38(1):154-155,159. |
| |
| Authors: | Liu Muquan Feng Zhijian Zhu Yueqi |
| |
| Affiliation: | 1. Chaozhou Monitoring Station of Environmental Protection, Chaozhou 521011 ; 2. Guangzhou Jinlongfeng Environmental Protection and Equipment Engineering Co., Ltd., Guagnzhou 510000, China) |
| |
| Abstract: | A process to treating wastewater nsaturated polyester Resin production was introduced. Domestic sewage of the factory was treated together with production wastewater. The proportion was about 3 ： 1. A part of domestic sewage was mixed with the production wastewater in the mixing tank. The other part enter in aeration tank as nitrogenous fertilizer. Using ＂anaerobic, aerobic, floating sand, carbon filter＂ coupling process to treat mixture of particial domestic sewage and Production wastewater which was already treated by floating device. After treatment, waster water was discharge after reaching standards. |
| |
| Keywords: | flotation anaerobictaok aeration tank |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
