| 管夹上下卡级进模设计 |
| |
| 引用本文： | 彭一航,周俊荣,谢辉,李志飞.管夹上下卡级进模设计[J].模具工业,2013(1):43-47. |
| |
| 作者姓名： | 彭一航 周俊荣 谢辉 李志飞 |
| |
| 作者单位： | 五邑大学机电学院 |
| |
| 摘 要： | 分析了管夹上、下卡的结构特点和成形工艺,设计了一副集冲裁、压字、弯曲、翻孔、压筋、压凸于一体的级进模,解决了单工序冲模生产导致的零件两端压弯高度不一致,翻孔壁厚不均匀问题。实际生产证明:模具结构紧凑,冲压过程平稳,生产的零件质量稳定,可为类似零件的级进模设计提供参考。
|
| 关 键 词： | 管夹上、下卡 排样设计 级进模 翻孔 |
Development of progressive die for pipe clamp |
| |
| PENG Yi-hang,ZHOU Jun-rong,XIE Hui,LI Zhi-fei.Development of progressive die for pipe clamp[J].Die & Mould Industry,2013(1):43-47. |
| |
| Authors: | PENG Yi-hang ZHOU Jun-rong XIE Hui LI Zhi-fei |
| |
| Affiliation: | (School of Mechanical and Electrical Engineering,Wuyi University,Jiangmen,Guangdong 529020,China) |
| |
| Abstract: | Based on the structural characteristic and forming process of a pipe clamp, a progressive die containing blanking, marking, bending, hole flanging, rib-pressing and belling process was designed. A series of problems such as inconsistency of part end＇s bending height and uneven of hole flanging wall-thickness occurred in single-process stamping die were solved. |
| |
| Keywords: | pipe clamp parts layout design progressive die flanging |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
