首页 | 官方网站   微博 | 高级检索  
     

新型码头钢-混凝土组合面板
引用本文:韦灼彬,王铁成,张小鹏.新型码头钢-混凝土组合面板[J].中国港湾建设,2006(3):24-28.
作者姓名:韦灼彬  王铁成  张小鹏
作者单位:1. 天津大学建筑工程学院,天津,300072;海军工程大学天津校区,天津,300450
2. 天津大学建筑工程学院,天津,300072
摘    要:基于特殊需要,提出了带型钢加劲肋的钢板-混凝土组合板这一新型组合码头面板。以加劲肋形式、组合板厚度和栓钉布置为参数,进行了9块组合板的力学性能试验。试验结果表明,通过适当地选择型钢加劲肋形式、合理地布置栓钉和确定混凝土厚度,可以保证组合作用的发挥。组合板的正截面承载力可按基于修正平截面假定的极限状态计算;组合板的变形,可在按现行钢结构设计规范计算的基础上,加上考虑界面滑移影响的附加变形值予以修正。计算值与试验值吻合较好。

关 键 词:型钢加劲肋  钢板-混凝土组合板  正截面承载力  附加变形
文章编号:1003-3688(2006)03-0024-05
收稿时间:2005-06-17
修稿时间:2005年6月17日

New Type Composite Panels of Steel and Concrete for Quays
WEI Zhuo-bin,WANG Tie-cheng,ZHANG Xiao-peng.New Type Composite Panels of Steel and Concrete for Quays[J].China Harbour Engineering,2006(3):24-28.
Authors:WEI Zhuo-bin  WANG Tie-cheng  ZHANG Xiao-peng
Affiliation:1. School of Civil Engineering, Tianjin, University, Tianjin 300072, China; 2. Tianjin School District, Navy Engineering University, Tianjin 300450, China
Abstract:A new type composite quay-wall panels of steel and concrete with profiled steel used as the stiffeners were proposed to meet special requirements.By using the types of stiffeners,the thickness of the composite panels and the arrangement of the goggle pins as the parameters,mechanical performance tests were made on 9 composite panels.The test results indicated that the performance of the composite panels can be well displayed if the types of steel stiffeners were adequately selected,the goggle pins were rationally laid out and the thickness of concrete was apropriately determined.The bearing capacity of normal section of the composite panels may be calculated according to the assumed limit state based on the modified normal sections while the deformation of the composite panels may be corrected according to the calculations made in line with the prevailing steel structure design codes and by taking into consideration the influence of the interfacial slipping motions.The calculated results agree well with the test results.
Keywords:siffeners made of profile steel  steel-concrete composite panel  bearing capacity of normal section  additional deformation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号