| 基于MAS技术的开放式数控系统软件体系结构的研究 |
| |
| 引用本文： | 张函,郭锐锋,耿聪,王峰.基于MAS技术的开放式数控系统软件体系结构的研究[J].组合机床与自动化加工技术,2011(6). |
| |
| 作者姓名： | 张函 郭锐锋 耿聪 王峰 |
| |
| 作者单位： | 1. 中国科学院研究生院,北京100039;中国科学院沈阳计算技术研究所高档数控国家工程研究中心,沈阳110171
2. 中国科学院沈阳计算技术研究所高档数控国家工程研究中心,沈阳,110171 |
| |
| 摘 要： | 文章详细分析了开放式数控系统的特征,指出了传统系统构建方法在满足数控系统智能化需求上的不足.在上述理论研究的基础上提出了基于多智能体技术(MAS)的开放式数控系统软件体系结构,并以两个典型智能体为例,论述了系统中各智能体的功能结构和设计方法,最后对系统中各智能体间的通信机制进行了研究和设计.引入多智能体技术,为构建开放式系统提供了一种可行方法,对深入研究开放式数控系统体系结构具有一定的参考价值.
|
| 关 键 词： | 数控系统 开放式系统 多智能体 通信机制 |
Study On Software Architecture of ONC System Based On Multi-Agent System |
| |
| ZHANG Han,GUO Rui-feng,GENG Cong,WANG Feng.Study On Software Architecture of ONC System Based On Multi-Agent System[J].Modular Machine Tool & Automatic Manufacturing Technique,2011(6). |
| |
| Authors: | ZHANG Han GUO Rui-feng GENG Cong WANG Feng |
| |
| Affiliation: | ZHANG Han1,2,GUO Rui-feng2,GENG Cong1,WANG Feng1,2(1.Graduate University of Chinese Academy of Sciences,Beijing 100039,China,2.National Engineering Research Center For High-End CNC,Shenyang Institute of Computing Technology,CAS,Shenyang 110171,China) |
| |
| Abstract: | This paper analyzes the characteristics of ONC system,and point out that the traditional method of building ONC system is incapable in intellectualization degree.On the basis of the theory and algorithm mentioned above,this paper proposed a kind of software architecture of ONC system based on Multi-Agent system,and the function and implementation of the agents in this system was discussed in detail with two typical examples.At last,the communication between the agents in the system was researched and design... |
| |
| Keywords: | CNC System ONC System Multi-agent System communication mechanism |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
