Interfacial reaction between multicomponent lead-free solders and Ag,Cu, Ni,and Pd substrates

The interfacial reaction between two prototype multicomponent lead-free solders, Sn-3.4Ag-1Bi-0.7Cu-4In and Sn-3.4Ag-3Bi-0.7Cu-4In (mass%), and Ag, Cu, Ni, and Pd substrates are studied at 250°C and 150°C. The microstructural characterization of the solder bumps is carried out by scanning electron microscopy (SEM) coupled with energy dispersive x-ray analysis. Ambient temperature, isotropic elastic properties (bulk, shear, and Young’s moduli and Poisson’s ratio) of these solders along with eutectic Sn-Ag, Sn-Bi, and Sn-Zn solders are measured. The isotropic elastic moduli of multicomponent solders are very similar to the eutectic Sn-Ag solder. The measured solubility of the base metal in liquid solders at 250°C agrees very well with the solubility limits reported in assessed Sn-X (X=Ag, Cu, Ni, Pd) phase diagrams. The measured contact angles were generally less than 15° on Cu and Pd substrates, while they were between 25° and 30° on Ag and Ni substrates. The observed intermediate phases in Ag/solder couples were Ag₃Sn after reflow at 250°C and Ag₃Sn and ζ (Ag-Sn) after solid-state aging at 150°C. In Cu/solder and Ni/solder couples, the interfacial phases were Cu₆Sn₅ and (Cu,Ni)₆Sn₅, respectively. In Pd/solder couples, only PdSn₄ after 60-sec reflow, while both PdSn₄ and PdSn₃ after 300-sec reflow, were observed.