首页 | 官方网站   微博 | 高级检索  
     

氧化锆流延基片的烧结温度及其性能研究
引用本文:罗志安,;肖建中.氧化锆流延基片的烧结温度及其性能研究[J].武汉冶金科技大学学报,2009(2):173-177.
作者姓名:罗志安  ;肖建中
作者单位:[1]武汉科技大学耐火材料与高温陶瓷国家重点实验室培育基地,湖北武汉430081; [2]华中科技大学材料科学与工程学院,湖北武汉430074
基金项目:武汉科技大学耐火材料与高温陶瓷湖北省重点实验室-省部共建国家重点实验室培育基地开放基金资助项目(G0706).
摘    要:比较了3种不同的烧结温度对氧化锆流延基片性能的影响。结果表明,随着烧结温度的升高,基片的收缩率和相对密度增加、硬度增加、气孔率减小、晶粒和气孔的平均尺寸均有所增加。在1500℃保温3h可以获得较高的致密度(相对密度97.8%)和合适的晶粒尺寸,试样在1073K时离子电导率为1.187×10^-2S·cm^-1,烧结体物相主要为四方相。

关 键 词:氧化锆  流延成型  烧结工艺

Sintering temperature and properties of ZrO2 tape-casting substrate
Affiliation:Luo Zhian , Xiao Jianzhong (1. The State Key Laboratory Breeding Base of Refractories and Ceramics, Wuhan University of Science and Technology, Wuhan 430081, China;2. School of Materials of Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China)
Abstract:The effects of three different sintering temperatures on the ZrO2 tape-casting substrate are compared. The results show that, as the sintering temperature increases, the shrinkage ratio, relative density,rigidity,and average sizes of pore and grain of the substrate also increase while the porosity decreases . Suitable density and grain size are obtained when the samples are sintered for 3 hours at 1 500 ℃ ,the ionic conductivity of the samples is 1. 187×10^-2S·cm^-1 at 1 073 K, and the main phase of the samples is tetragonal zirconia.
Keywords:zirconial tape casting i sintering process
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号