| 管板单边电阻点焊过程预压接触分析 |
| |
| 引用本文： | 梁彩平,李永兵,林忠钦,陈关龙.管板单边电阻点焊过程预压接触分析[J].焊接学报,2006,27(7):29-33. |
| |
| 作者姓名： | 梁彩平 李永兵 林忠钦 陈关龙 |
| |
| 作者单位： | 上海交通大学,机械与动力工程学院,上海,200030 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 通过建立轴对称有限元模型,对管板单边电阻点焊预压过程中电极与板以及板与管间接触行为进行了研究,系统分析了预压阶段接触区域范围及接触压力分布的影响因素.研究发现,管板焊接过程预压阶段的接触压力分布与传统点焊过程预压阶段接触压力分布有很大的不同.在电极和板以及板和管之间均形成环状接触区,可能导致焊后形成环状熔核;预压过程中,电极和板间接触区不受压力变化影响,板和管间接触区则受压力影响明显;接触区域大小和电极端面直径、管板厚度等因素均有关系.试验表明,所建模型的模拟结果与实际是相吻合的,为今后管板电阻点焊工艺参数优化及车身轻量化中管板厚度比优化提供有效依据.
|
| 关 键 词： | 电阻点焊 单边焊 液压管 预压接触 数值模拟 |
| 文章编号： | 0253-360X（2006）07-029-05 |
| 收稿时间： | 06 15 2005 12:00AM |
| 修稿时间： | 2005-06-15 |
Contact status during squeeze stage of sheet-tube single-sided spot welding using servo gun |
| |
| LIANG Cai-ping,LI Yong-bing,LIN Zhong-qin and CHEN Guan-long.Contact status during squeeze stage of sheet-tube single-sided spot welding using servo gun[J].Transactions of The China Welding Institution,2006,27(7):29-33. |
| |
| Authors: | LIANG Cai-ping LI Yong-bing LIN Zhong-qin and CHEN Guan-long |
| |
| Affiliation: | School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200030, China,School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200030, China,School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200030, China and School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200030, China |
| |
| Abstract: | An axisymmetric finite element model was developed to simulate the contact status between electrode and sheet and between sheet and tube during the squeeze stage of sheet-tube single-sided spot welding.Some influencing factors on the contact region and pressure distribution were discussed.Analyses showed that the squeeze stage of sheet-tube single-sided spot welding has great difference from that of the traditional spot welding.By the results,there exist ring contact regions between the electrode and sheet and between sheet and tube which are different greatly and will get a ring nugget after welding.The contact region between the electrode and sheet is determined by electrode end size rather than pressure,but that between the sheet and tube is determined by pressure as well as electrode size.In addition,comparison of the analytic results to test data using servo gun are presented and discussed.The simulated results are in good accordauce with the experiments.The stuties offer the proof for the parameter optimization in body light weight and nugget quality control. |
| |
| Keywords: | resistance spot welding single-sided welding tubular hydroforming squeeze contact simulation analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
