| 单层钎焊金刚石砂轮的机械化学修整 |
| |
| 引用本文： | 王帅,苏宏华,张贝,徐旺,张刚.单层钎焊金刚石砂轮的机械化学修整[J].金刚石与磨料磨具工程,2011,31(1):35-38. |
| |
| 作者姓名： | 王帅 苏宏华 张贝 徐旺 张刚 |
| |
| 作者单位： | 南京航空航天大学机电学院,南京,210016 |
| |
| 基金项目： | 江苏省自然科学基金，航空基金，教育部创新团队项目 |
| |
| 摘 要： | 单层钎焊金刚石砂轮的应用因其磨粒等高性不一致而在硬脆材料的精密加工中受到一定限制。本文采用机械化学复合法对80/100单层钎焊金刚石砂轮进行了修整试验研究。在修整实验前后,测量了砂轮工作面圆跳动,跟踪了磨粒的形貌变化,进行了砂轮磨削K9玻璃实验,观察并分析了工件磨削后的粗糙度值的变化。研究结果表明：机械化学复合法对单层钎焊金刚石砂轮的修整是有效的,磨粒的磨损以化学腐蚀为主,砂轮修整后磨粒等高性较好,磨削K9玻璃工件表面粗糙度明显降低。
|
| 关 键 词： | 修整 单层钎焊金刚石砂轮 机械化学修整 K9玻璃 |
Chemical-mechanical truing of monolayer brazed diamond grinding wheel |
| |
| Wang Shuai,Su Honghua,Zhang Bei,Xu Wang,Zhang Gang.Chemical-mechanical truing of monolayer brazed diamond grinding wheel[J].Diamond & Abrasives Engineering,2011,31(1):35-38. |
| |
| Authors: | Wang Shuai Su Honghua Zhang Bei Xu Wang Zhang Gang |
| |
| Affiliation: | Wang Shuai Su Honghua Zhang Bei Xu Wang Zhang Gang(College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China) |
| |
| Abstract: | The application of monolayer brazed diamond grinding wheel is limited in the precision machining of hard and brittle materials for its contour inconsistency.In this paper,the truing experiments of monolayer brazed diamond grinding wheel with 80/100 grains were carried out by means of the chemical-mechanical method.The outside diameter of the wheel was measured before and after truing.The morphology changes of the diamond grains were tracked.Finally,the grinding experiments on K9 optical materials were condu... |
| |
| Keywords: | truing monolayer brazed diamond grinding wheel chemical-mechanical truing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
