| 圆弧转子泵转子型线设计 |
| |
| 引用本文： | 杨国来,杜旭明,郑海,孙善兵,张姗玲,白桂香.圆弧转子泵转子型线设计[J].四川工业学院学报,2012(2):66-68. |
| |
| 作者姓名： | 杨国来 杜旭明 郑海 孙善兵 张姗玲 白桂香 |
| |
| 作者单位： | [1]兰州理工大学能源与动力工程学院,甘肃兰州730050 [2]兰州理工大学温州泵阀工程研究院,浙江温州325105 |
| |
| 基金项目： | 甘肃省自然科学研究基金计划项目（1014RJZA023） |
| |
| 摘 要： | 针对圆弧转子泵的圆弧转子,分析了转子型线的组成和参数,根据共轭原理推导出圆弧转子的理论型线方程,进而得到转子的实际型线方程,并通过型线的参数方程建立了三维实体模型,运用三维设计软件中的运动模拟功能,对三维模型进行运动模拟,模拟结果可知转子型线之间没有干涉,且间隙均匀。
|
| 关 键 词： | 转子泵 圆弧转子 型线方程 |
Design of Rotor Curve for Circular Rotor Pumps |
| |
| YANG Guo-lai,DU Xu-ming,ZHENG Hai,SUN Shan-bing,ZHANG Shan-ling,BAI Gui-xiang.Design of Rotor Curve for Circular Rotor Pumps[J].Journal of Sichuan University of Science and Technology,2012(2):66-68. |
| |
| Authors: | YANG Guo-lai DU Xu-ming ZHENG Hai SUN Shan-bing ZHANG Shan-ling BAI Gui-xiang |
| |
| Affiliation: | 1.School of Energy and Power Engineering,Lanzhou University of Technology,Lanzhou 730050 China; 2.Wenzhou Research Institute of Pump and Valve Engineering,Lanzhou University of Technology,Wenzhou 325105 China) |
| |
| Abstract: | This article analyzed the composition and parameters of the circular rotor in a circular rotor pump.Based on conjugating principle,the theoreticl curve equation was deduced,furthermore,the curve of the rotor in practical use was generated.Three-dimensional solid model was established using the parametrical equation of the curve,and movement simulation was conducted with software Autodesk Revit.The results show that no interference is found between the curves of the rotor,and uniform gap exists. |
| |
| Keywords: | rotor pump circular rotor curve equation |
| 本文献已被 维普 等数据库收录！ |
|
