首页 | 官方网站   微博 | 高级检索  
     

电子束蒸发制备PbI_2薄膜及其性能表征
引用本文:朱兴华,杨定宇,魏昭荣,杨维清,朱世富,赵北君.电子束蒸发制备PbI_2薄膜及其性能表征[J].半导体光电,2009,30(5):700-702,707.
作者姓名:朱兴华  杨定宇  魏昭荣  杨维清  朱世富  赵北君
作者单位:成都信息工程学院,光电技术系,成都,610225;四川大学,材料科学与工程学院,成都,610064
摘    要:采用电子束蒸发工艺在普通玻璃衬底上制备了PbI_2多晶薄膜,研究了不同衬底温度对薄膜结构、表面形貌及紫外-可见光谱的影响.XRD结构表征显示,不同衬底温度下沉积的PbI_2薄膜均属六方结构,低温下呈现(002)方向的c轴择优生长,但随着衬底温度的升高,择优生长弱化;SEM形貌分析结果表明,PbI_2薄膜的晶粒尺寸随着衬底温度的升高而增大,同时晶粒间应力造成的突起减少,薄膜表面致密度和平整度提高;UV光谱测试结果表明,不同衬底温度下制备PbI_2薄膜透过光谱的吸收限均在515nm附近,且呈现陡直的吸收边.计算发现,薄膜禁带宽度约为2.42 eV,随着衬底温度升高而略微增大,显示结晶质量提高.
Abstract:
Polycrystalline lead iodide (PbI_2) thin films were deposited on glass substrates by electron beam evaporation method.The influence of different substrate temperatures on the structure,surface morphology and optical transmittance of the films was studied.XRD analysis shows the PbI_2 films deposited at different temperatures possess hexagonal structure,with a preferred growth orientation of (002) at low temperature,but this preferred growth characteristic vanishes when the substrate temperature increases.SEM micrograph reveals the grain size of PbI_2 thin films increases with the rising substrate temperature,meanwhile,the surface bulges resulted from the strain between grains decrease,making the surface of the films more compact and uniform.UV transmittance shows the steep absorption edge is at 515 nm for all samples grown under different substrate temperatures and the corresponding band gap is about 2.42 eV.

关 键 词:PbI2薄膜  电子束蒸发  XRD分析  SEM形貌  UV光谱测试

Characterization and Preparation of PbI_2 Thin Films Grown by Electron Beam Evaporation
ZHU Xing-hua,YANG Ding-yu,WEI Zhao-rong,YANG Wei-qing,ZHU Shi-fu,ZHAO Bei-jun.Characterization and Preparation of PbI_2 Thin Films Grown by Electron Beam Evaporation[J].Semiconductor Optoelectronics,2009,30(5):700-702,707.
Authors:ZHU Xing-hua  YANG Ding-yu  WEI Zhao-rong  YANG Wei-qing  ZHU Shi-fu  ZHAO Bei-jun
Abstract:Polycrystalline lead iodide (PbI_2) thin films were deposited on glass substrates by electron beam evaporation method.The influence of different substrate temperatures on the structure,surface morphology and optical transmittance of the films was studied.XRD analysis shows the PbI_2 films deposited at different temperatures possess hexagonal structure,with a preferred growth orientation of (002) at low temperature,but this preferred growth characteristic vanishes when the substrate temperature increases.SEM micrograph reveals the grain size of PbI_2 thin films increases with the rising substrate temperature,meanwhile,the surface bulges resulted from the strain between grains decrease,making the surface of the films more compact and uniform.UV transmittance shows the steep absorption edge is at 515 nm for all samples grown under different substrate temperatures and the corresponding band gap is about 2.42 eV.
Keywords:Pbl_2 film  electron beam evaporation  XRD analysis  SEM morphology  UV transmittance spectrum
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号