分子刚度对膜锚定受体-配体结合动力学影响的理论与模拟研究

人体内大部分生物学过程都离不开细胞黏附.细胞黏附行为主要由锚定于细胞膜上的特异性分子（又称受体和配体）的结合动力学关系来决定.已有研究表明，特异性分子的结合关系受外力及细胞膜波动等多种因素影响.然而，特异性分子刚度对细胞膜锚定受体 配体结合关系的影响机制仍不清楚.近期关于新冠病毒强传染力的研究表明，特异性黏附分子刚度对病毒与细胞结合具有重要影响.该文通过建立生物膜黏附的粗粒度模型，借助分子模拟和理论分析来研究分子刚度在黏附中的作用.结果表明，始终存在一个最佳膜间距及最佳分子刚度值，使得黏附分子亲和力和结合动力学参数达到最大值.这项研究不仅能加深人们对细胞黏附的认知，还有助于指导药物设计、疫苗研发等.     

单晶硅晶格间距的测量技术进展及应用

单晶硅晶格间距是许多重要物理常数测量的基础。本文介绍了硅晶格间距测量技术的发展历程,包括X射线干涉仪直接测量和晶格比较仪间接测量两种方法,以及影响测量结果不确定度的关键因素。得益于晶格间距测量的进展,在纳米尺度,硅晶格间距被国际计量局(BIPM)批准成为新的米定义复现形式。最后介绍了硅晶格在计量学中的应用,以及基于硅晶格实现纳米几何量测量的溯源体系的研究趋势。     

1+1/2对转涡轮叶排轴向间距对性能影响的研究

木文对1+1/2对转涡轮中轴向间距影响进行了初步研究。对不同轴向间距叶栅流场进行了大量时间精确模拟。研究表明,1+1/2对转涡轮高低压转叶间轴向间距成为追求高效率的制约因素,轴向间距为高压转叶喉部宽度是关键点。因此有关小轴向间距下强激波/叶排干扰的研究应该加强。     

粒子-转子模型和推转壳模型中的能谱统计分析

用粒子–转子模型和推转壳模型研究了6个粒子分别填充在单j壳和双j壳上的混沌行为.分析了单j壳和双j壳情况下能谱的最近邻能级间距分布和谱刚度随自旋及推转频率的变化,结果表明,当组态空间大小不变时,系统在双j壳(g_7/2+d_5/2)情况下比在单j壳(i_13/2)情况下更规则,而当组态空间从单j壳(i_13/2)扩大到双j壳(i_13/2+g_9/2)时,系统的混沌程度变化不大.同时比较了将6个粒子的两体相互作用分别取为δ力和对力时的系统的混沌行为     

非等间距序列建模过程中存在的问题及改进

在研究非等间距序列的基础上 ,本文将非等间距累加运用于非等间距序列的建模过程中 ,使原有模型得到改进 .实例表明 ,改进后模型的精度有了很大提高     

近场光学显微技术

本文在介绍近场光学显微镜原理的基础上，对近场光学显微技术进行了一定深度的探讨，并着重研究了纳米级探针的制作和纳米级样品与探针间距的控制这两个近场光学显微技术中的关键问题，说明了近场光学显微探针的工作方式，阐述了近场光学成像的衬度类型，介绍了近场光学显微技术在多个领域的应用。在参考大量国内外最新研究成果的基础上，提出了一些个人的见解。     

双相干点光源干涉的一般分析

讨论了双相干点光源的三维空间干涉场的一般数学描述,分析了3个不同截面处的干涉强度的空间分布情况,并给出了相干相长点的计算机模拟图样.该结果也适用于其他类型波的相干叠加场分布.     

微型热驱动热声热机热端换热器的优化设计

该文基于热声环境,采用厘米级扁管和deltaE数值计算对微型热声换热器进行了优化设计。     

CeO2担载Cu纳米粒子电催化CO2还原产乙烯：CeO2不同暴露晶面对催化性能的影响

Fossil fuels are expected to be the major source of energy for the next few decades. However, combustion of nonrenewable resources leads to the release of large quantities of CO₂, the primary greenhouse gas. Notably, the concentration of CO₂ in the atmosphere is increasing annually at an astounding rate. Electrochemical CO₂ reduction (ECR) to value-added fuels and chemicals using electricity from intermittent renewable energy sources is a carbon-neutral method to alleviate anthropogenic CO₂ emissions. Despite the steady progress in the selective generation of C₁ products (CO and formic acid), the production of multi-carbon species still suffers from low selectivity and efficiency. As an ECR product, ethylene (C₂H₄) has a higher energy density than do C₁ species and is an important industrial feedstock in high demand. However, the conversion of CO₂ to C₂H₄ is plagued by low productivity and large overpotential, in addition to the severe competing hydrogen evolution reaction (HER) during the ECR. To address these issues, the design and development of advanced electrocatalysts are critical. Here, we demonstrate fine-tuning of ECR to C₂H₄ by taking advantage of the prominent interaction of Cu with shape-controlled CeO₂ nanocrystals, that is, cubes, rods, and octahedra predominantly covered with (100), (110), and (111) surfaces, respectively. We found that the selectivity and activity of the ECR depended strongly on the exposed crystal facets of CeO₂. The overall ECR Faradaic efficiency (FE) over Cu/CeO₂(110) (FE ≈ 56.7%) surpassed that of both Cu/CeO₂(100) (FE ≈ 51.5%) and Cu/CeO₂(111) (FE ≈ 48.4%) in 0.1 mol·L^-1 KHCO₃ solutions with an H-type cell. This was in stark contrast to the exclusive occurrence of the HER over pure carbon paper, CeO₂(100), CeO₂(110), and CeO₂(111). In particular, the FE toward C₂H₄ formation and the partial current density increased in the sequence Cu/CeO₂(111) < Cu/CeO₂(100) < Cu/CeO₂(110) within applied bias potentials from -1.00 to -1.15 V (vs. the reversible hydrogen electrode), reaching 39.1% over Cu/CeO₂(110) at a mild overpotential (1.13 V). The corresponding values for Cu/CeO₂(100) and Cu/CeO₂(111) were FE_C2H4 ≈ 31.8% and FE_C2H4 ≈ 29.6%, respectively. The C₂H₄ selectivity was comparable to that of many reported Cu-based electrocatalysts at similar overpotentials. Furthermore, the FE for C₂H₄ remained stable even after 6 h of continuous electrolysis. The superior ECR activity of Cu/CeO₂(110) to yield C₂H₄ was attributed to the metastable (110) surface, which not only promoted the effective adsorption of CO₂ but also remarkably stabilized Cu⁺, thereby boosting the ECR to produce C₂H₄. This work offers an alternative strategy to enhance the ECR efficiency by crystal facet engineering.     

表面活性剂模板在空气-水界面ZrO2薄膜中的稳定性

采用模板——十二烷基苯磺酸(DBS-H)在空气-水界面组装ZrO₂薄膜，研究了DBS-H在ZrO₂自组装薄膜中的水溶性、化学稳定性、热稳定性和光化学稳定性。模板的各类稳定性将直接控制ZrO₂薄膜结构，主要表现在层间距变化上。从模板与Na₂SiO₃反应的研究中获得了一种制备ZrO₂ / SiO₂复合氧化物薄膜的新方法，并推测出该复合薄膜的结构。