溶剂去除速度对于溶剂退火薄膜相形貌的影响

以聚苯乙烯-聚4-乙烯基吡啶(PS-b-P4VP)嵌段共聚物作为研究对象,采用DMF作为退火溶剂,以原子力显微镜(AFM)和透射电子显微镜(TEM)为表征手段,研究了溶剂退火后期溶胀薄膜中溶剂的去除速度对于薄膜相形貌的影响,发现通过改变溶剂去除速度可以有效的调控薄膜中的形貌.当薄膜厚度为35 nm时,DMF的快速挥发会导致薄膜中形成以PS为分散相的反转柱状相结构,当降低溶剂的挥发速度时,薄膜中形成了以PS为分散相的环状形貌,当进一步减缓挥发速度时,薄膜中将形成台阶状的片层结构;然而当薄膜厚度为55 nm时,溶剂退火后期薄膜中形成的是以P4VP为分散相的正常柱状相结构,在相同溶剂去除速度条件下薄膜相形貌变化较小.     

One-pot,solvent-free and efficient synthesis of 2,4,6-triarylpyridines catalyzed by nano-titania-supported sulfonic acid as a novel heterogeneous nanocatalyst

Nano titania-supported sulfonic acid (n-TSA) has found to be a highly efficient, eco-friendly and recyclable heterogeneous nanocatalyst for the solvent-free synthesis of 2, 4, 6-triarylpyridines through one-pot three-component reaction of acetophenones, aryl aldehydes and ammonium acetate. This reported method illustrates several advantages such as environmental friendliness reaction conditions, simplicity, short reaction time, easy work up, reusability of catalyst and high yields of the products. One new compound is reported too. Furthermore, the catalyst could be recycled after a simple work-up, and reused at least six times without substantial reduction in its catalytic activity.     

Free radical oxidation reaction for selectively solvatochromic sensors with dynamic sensing ability

A novel BODIPY (boradiazaindacene) dye denoted as BODIPY-DT containing terpyridine unit has been designed and characterized. The dye is found to be selective and visual solvatochromic sensor toward DMF among test organic solvents. The sensing process displays time-controllable, dynamic signal outputs in the emission colors including red, purple, yellow and even white emission colors. It is presented that selective free radical oxidation reaction happens during the recognition process.     

Reaction of Tertiary 2-Chloroketones with Cyanide Ions: Application to 3-Chloroquinolinediones

3-Chloroquinoline-2,4-diones react with cyanide ions in dimethyl formamide to give 3-cyanoquinoline-2,4-diones in small yields due to the strong hindrance of the substituent at the C-3 atom. Good yields can be achieved if the substituent at this position is the methyl group. In the methanol solution, the reaction proceeds by an addition mechanism to form 2-oxo-1a,2,3,7b-tetrahydrooxireno[2,3-c]quinoline-7b-carbonitriles, from which 4-hydroxy-3-methoxy-2-oxo-1,2,3,4-tetrahydroquinoline-4-carbonitriles are subsequently formed by opening of the epoxide ring with methanol. Some minor products of these reactions have also been isolated. The ¹H, ¹³C and ¹⁵N NMR spectra of the prepared compounds were measured, and all resonances were assigned using appropriate two-dimensional spectra.     

Combining Deep Eutectic Solvents with TEMPO-based Polymer Electrodes: Influence of Molar Ratio on Electrode Performance**

For sustainable energy storage, all-organic batteries based on redox-active polymers promise to become an alternative to lithium ion batteries. Yet, polymers contribute to the goal of an all-organic cell as electrodes or as solid electrolytes. Here, we replace the electrolyte with a deep eutectic solvent (DES) composed of sodium bis(trifluoromethanesulfonyl)imide (NaTFSI) and N-methylacetamide (NMA), while using poly(2,2,6,6-tetramethylpiperidin-1-yl-oxyl methacrylate) (PTMA) as cathode. The successful combination of a DES with a polymer electrode is reported here for the first time. The electrochemical stability of PTMA electrodes in the DES at the eutectic molar ratio of 1 : 6 is comparable to conventional battery electrolytes. More viscous electrolytes with higher salt concentration can hinder cycling at high rates. Lower salt concentration leads to decreasing capacities and faster decomposition. The eutectic mixture of 1 : 6 is best suited uniting high stability and moderate viscosity.     

Robust and Wide Temperature-Range Zinc Metal Batteries with Unique Electrolyte and Substrate Design

Rechargeable zinc metal batteries are promising for large-scale energy storage. However, their practical application is limited by harsh issues such as uncontrollable dendrite growth, low Coulombic efficiency, and poor temperature tolerance. Herein, a unique design strategy using γ-valerolactone-based electrolyte and nanocarbon-coated aluminum substrate was reported to solve the above problems. The electrolyte with extremely low freezing point and high thermal stability enables the symmetric cells with long cycle life over a wide temperature range (−50 °C to 80 °C) due to its ability to regulate zinc nucleation and preferential epitaxial growth. Besides, the nanocarbon-coated aluminum substrate can also promote a higher Coulombic efficiency over a wide temperature range in contrast to the low Coulombic efficiency of copper substrates with significant irreversible alloying reactions because this unique substrate with excellent chemical stabilization can homogenize the interfacial electron/ion distribution. The optimized zinc metal capacitors can operate stably under various temperature conditions (2000 cycles at 30 °C with 66 % depth of discharge and 1200 cycles at 80 °C with 50 % depth of discharge). This unique electrolyte and substrate design strategy achieves a robust zinc metal battery over a wide temperature range.     

Tunable Synthesis of Monofluoroalkenes and Gem-Difluoroalkenes via Solvent-Controlled Rhodium-Catalyzed Arylation of 1-Bromo-2,2-difluoroethylene

Divergent synthesis of fluorine-containing scaffolds starting from a suite of raw materials is an intriguing topic. Herein, we report the solvent-controlled rhodium-catalyzed tunable arylation of 1-bromo-2,2-difluoroethylene. The selection of the reaction solvents provides switchable defluorinated or debrominated arylation from readily available feedstock resources (both arylboronic acids/esters and 1-bromo-2,2-difluoroethylene are commercially available). This switch is feasible because of the difference in coordination ability between the solvent (CH₂Cl₂ or CH₃CN) and the rhodium center, resulting in different olefin insertion. This protocol allows the convenient synthesis of monofluoroalkenes and gem-difluoroalkenes, both of which are important scaffolds in the fields of medicine and materials. Moreover, this newly developed solvent-regulated reaction system can be applied to the site-selective dechlorinated arylation of trichloroethylene. Overall, this study provides a useful strategy for the divergent synthesis of fluorine-containing scaffolds and provides insight into the importance of solvent selection in catalytic reactions.     

Solvent free synthesis of trifluoromethyl tertiary alcohols by cross Aldol reaction

Exceedingly fast preparation of trifluoromethyl tertiary alcohols has been accomplished from methyl ketones and trifluoromethyl ketones under solvent free conditions by cross Aldol reaction. The reaction was achieved in the presence of common inorganic base by grinding method at ambient temperature to give β-trifluoromethyl-β-hydroxyl ketones in high yields (up to 95%).     

计算机辅助设计三聚氰胺分子印迹聚合物

借助密度泛函理论(DFT)长程校正方法,以三聚氰胺(MAM)为印迹分子,甲基丙烯酸(MAA)为功能单体,分别以二甲基丙烯酸乙二醇酯(EGDMA)、三羟甲基丙烷三甲基丙烯酸酯(TRIM)及二乙烯苯(DVB)为交联剂,以乙腈(ACN)、甲醇(MT)、乙醇(EA)、甲苯(TL)、四氢呋喃(THF)及二甲基亚砜(DMSO)为溶剂,模拟了MAM与MAA单体分子印迹聚合物(MIPs)自组装体系的构型,讨论了MAM与MAA的成键作用位点,及其稳定复合物的印迹反应比例及印迹作用机理,依据结合能(△E)优化了交联剂和溶剂,并借助分子中原子理论(AIM)揭示了MAM与MAA印迹作用的本质.计算结果表明,MAM印迹分子三嗪环上的N与胺基上H均通过氢键与MAA单体进行印迹聚合反应,且在印迹反应比例为1∶6,以TL为溶剂时形成的MAM-MAA有序复合物结合能最低,构型最稳定;与TRIM及EGDMA交联剂相比,DVB与MAM结合能最低,更适宜作为MAM-MAA印迹聚合物的交联剂.本研究为MAM-MIPs合成时印迹比例、交联剂及溶剂的选择提供了理论依据.     

The influence of organic sample solvents on the separation efficiency of basic compounds under strong cation exchange mode

This study investigated the influence of organic sample solvents on separation efficiency of basic compounds under strong cation exchange (SCX) mode. The mixtures of acidic aqueous solution and organic solvent such as acetonitrile, ethanol, methanol and dimethyl sulfoxide (DMSO) were tested as sample solvents. For later-eluting analytes, the increase of sample solvent elution strength was responsible for the decrease of separation efficiency. Thus, sample solvents with weak elution strength could provide high separation efficiencies. For earlier-eluting analytes, the retention of organic sample solvents was the main factor affecting separation efficiency. Weakly retained solvents could provide high separation efficiency. In addition, an optimized approach was proposed to reduce the effect of organic sample solvent, in which low ionic solvent was employed as initial mobile phase in the gradient. At last, the analysis of impurities in hydrophobic drug berberine was performed. The results showed that using acidic aqueous methanol as sample solvents could provide high separation efficiency and good resolution (R > 1.5).