Interfacial microstructure and mechanical properties of Ti3SiC2 ceramic and TC11 alloy joint diffusion bonded with a Cu interlayer

Reliable joints of Ti₃SiC₂ ceramic and TC11 alloy were diffusion bonded with a 50 μm thick Cu interlayer. The typical interfacial structure of the diffusion boned joint, which was dependent on the interdiffusion and chemical reactions between Al, Si and Ti atoms from the base materials and Cu interlayer, was TC11/α-Ti + β-Ti + Ti₂Cu + TiCu/Ti₅Si₄ + TiSiCu/Cu(s, s)/Ti₃SiC₂. The influence of bonding temperature and time on the interfacial structure and mechanical properties of Ti₃SiC₂/Cu/TC11 joint was analyzed. With the increase of bonding temperature and time, the joint shear strength was gradually increased due to enhanced atomic diffusion. However, the thickness of Ti₅Si₄ and TiSiCu layers with high microhardness increased for a long holding time, resulting in the reduction of bonding strength. The maximum shear strength of 251 ± 6 MPa was obtained for the joint diffusion bonded at 850 °C for 60 min, and fracture primarily occurred at the diffusion layer adjacent to the Ti₃SiC₂ substrate. This work provided an economical and convenient solution for broadening the engineering application of Ti₃SiC₂ ceramic.     

Effects of high-pressure-modified soy 11S globulin on the gel properties and water-holding capacity of pork batter

The effects of high-pressure-modified soy 11S globulin (0.1, 200, and 400 MPa) on the gel properties, water-holding capacity, and water mobility of pork batter were investigated. The high-pressure-modified soy 11S globulin significantly increased (P < 0.05) the emulsion stability, cooking yield, hardness, springiness, chewiness, resilience, cohesiveness, the a^* and b^* values, and the G′ and G′′ values of pork batter at 80 °C, compared with those of 0.1 MPa-modified globulin. In contrast, the centrifugal loss and initial relaxation time of T_2b, T₂₁, and T₂₂ significantly decreased (P < 0.05). Meanwhile, the microstructure was denser, and the voids were smaller and more uniform compared with those of 0.1 MPa-modified globulin. In addition, the sample with 11S globulin modified at 400 MPa had the best water-holding capacity, gel structure, and gel properties among the samples. Overall, the use of high-pressure-modified soy 11S globulin improved the gel properties and water-holding capacity of pork batter, especially under 400 MPa.     

Nido-Hydroborate-Based Electrolytes for All-Solid-State Lithium Batteries

Hydroborate-based solid electrolytes have recently been successfully employed in high voltage, room temperature all-solid-state sodium batteries. The transfer to analogous lithium systems has failed up to now due to the lower conductivity of the corresponding lithium compounds and their high cost. Here LiB₁₁H₁₄ nido-hydroborate as a cost-effective building block and its high-purity synthesis is introduced. The crystal structures of anhydrous LiB₁₁H₁₄ as well as of LiB₁₁H₁₄-based mixed-anion solid electrolytes are solved and high ionic conductivities of 1.1 × 10⁻⁴ S cm⁻¹ for Li₂(B₁₁H₁₄)(CB₁₁H₁₂) and 1.1 × 10⁻³ S cm⁻¹ for Li₃(B₁₁H₁₄)(CB₉H₁₀)₂ are obtained, respectively. LiB₁₁H₁₄ exhibits an oxidative stability limit of 2.6 V versus Li⁺/Li and the proposed decomposition products are discussed based on density functional theory calculations. Strategies are discussed to improve the stability of these compounds by modifying the chemical structure of the nido-hydroborate cage. Galvanostatic cycling in symmetric cells with two lithium metal electrodes shows a small overpotential increase from 22.5 to 30 mV after 620 h (up to 0.5 mAh cm⁻²), demonstrating that the electrolyte is compatible with metallic anodes. Finally, the Li₂(B₁₁H₁₄)(CB₁₁H₁₂)  electrolyte is employed in a proof-of-concept half cell with a TiS₂ cathode with a capacity retention of 82% after 150 cycles at C/5.     

Nucleation‐controlled dual semicrystalline morphology of polyamide 11

Crystallization of polyamide 11 at low supercooling of the melt proceeds via heterogeneous nucleation and spherulitic growth of lamellae, while at temperatures close to the glass transition homogeneous nucleation prevails, preventing spherulite formation and leading to formation of a large number of nanometer‐sized mesophase domains. It is shown that spherulitic and non‐spherulitic crystallization at low and high supercooling of the melt, respectively, can be enforced by tailoring the cooling conditions, causing a twofold semicrystalline morphology at ambient temperature. Analysis of non‐isothermal crystallization as a function of the cooling rate, using fast scanning chip calorimetry, reveals that in the case of polyamide 11 such twofold semicrystalline morphology is predicted when cooling at rates between about 20 and 200 K s^?1, since then two separate crystallization events are observed. The prediction has been confirmed by preparation of films crystallized during ballistic cooling at different rates which then were analyzed regarding their structure using optical microscopy, X‐ray diffraction and calorimetry. The study is completed by discussion of implications of twofold non‐isothermal crystallization for structure evolution in polymer processing, as well as by providing information that such behavior is not only typical for polyamide 11 but also for isotactic polypropylene or poly(butylene terephthalate) as two further examples. © 2018 Society of Chemical Industry     

Synthesis and Preliminary Evaluation of 11C-Labeled VU0467485/AZ13713945 and Its Analogues for Imaging Muscarinic Acetylcholine Receptor Subtype 4

Muscarinic acetylcholine receptors (mAChRs) have five distinct subunits (M₁–M₅) and are involved in the action of the neurotransmitter acetylcholine in the central and peripheral nervous system. Attributed to the promising clinical efficacy of xanomeline, an M₁/M₄-preferring agonist, in patients of schizophrenia and Alzheimer's disease, M₁- or M₄-selective mAChR modulators have been developed that target the topographically distinct allosteric sites. Herein we report the synthesis and preliminary evaluation of ¹¹C-labeled positron emission tomography (PET) ligands based on a validated M₄R positive allosteric modulator VU0467485 (AZ13713945) to facilitate drug discovery. [¹¹C]VU0467485 and two other ligands were prepared in high radiochemical yields (>30 %, decay-corrected) with high radiochemical purity (>99 %) and high molar activity (>74 GBq μmol⁻¹). In vitro autoradiography studies indicated that these three ligands possess moderate-to-high in vitro specific binding to M₄R. Nevertheless, further physiochemical property optimization is necessary to overcome the challenges associated with limited brain permeability.     

One-pot synthesis of the highly efficient bifunctional Ni-SAPO-11 catalyst

Hydroisomerization of linear alkanes to branched isomers is an important petrochemical process for production of gasoline with high octane number.Non-noble metal bifunctional catalysts used in this process always suffer from low metal dispersion and poor metal-acid synergy.Herein,a facile one-pot synthesis method was used to simultaneously regulate metal particle sizes and acidity of the Ni-SAPO-11 hydroisomerization catalyst.The physicochemical properties are investigated using XANES,EXAFS,TEM/STEM,FT-1R,XPS,UV-vis and NH3-TPD.Apart from the highly dispersed nickel nanoparticles with an average diameter of 8 nm,the framework Ni2+ions are generated via substituting framework Al3+ions of the SAPO-11.The formed NiP-OH structures have lower deprotonation energy(DPE)than the SiAl-OH ones,contributing more and stronger acid sites to the Ni-SAPO-11 catalyst.The great metal-acid synergy including high metal to acid sites ratio(nNi/nA)and close intimacy is obtained for the Ni-SAPO-11 catalyst.The Ni-SAPO-11 catalyst outperforms the counterpart prepared by the impregnation method and exhibits comparable activity and isomers selectivity to the Pt/SAPO-11 catalyst in the n-hexane hydroisomerization.     

Synthesis,Characterization, Speciation,and Biological Studies on Metal Chelates of Carbohydrates with Molecular Docking Investigation

The role of starch aerogel (St-AG) and carboxymethyl cellulose (CMC) as biolgical active compounds, when they subjected for complexation with metal ions, is assessed in this work. The complexation is carried out with palladium(II) and copper(II) ions, in solid state. Different tools of analysis are carried out to characterize and elucidate the structures of these complexes, namely: elemental analysis, IR, thermal analysis, magnetic measurement and molar conductance techniques. All synthesized complexes are formed with 1:2 (metal:ligand) stoichiometry except the case of aerogel starch 1:1 (Pd:starch). All isolated complexes show a satisfactory cytotoxic effect results against colon cancer cell lines HCT11. Additionally, these complexes are screened for their antibacterial activities against two types of Gram positive and negative bacteria. Molecular docking investigation confirmed the cytotoxicity and antibacterial results. Proton–ligands association constants and their complex formation constants with some bivalent metal ions, using potentiometric method show that the complexes formed in solution have a stoichiometry of 1:1 [metal:ligand]. The effects of metal ion, ionic radius, electronegativity and nature of ligand on the formation constants are discussed. The formation constants of the complexes with 3D transition metals followed the order Mn²⁺ < Co²⁺ < Ni²⁺ < Cu²⁺ > Zn²⁺.     

Synthesis and luminescence properties of nitrided lanthanum magnesium hexaluminate LaMgAl11O19 phosphors

Nitrided LaMgAl₁₁O₁₉ phosphors were prepared by a two-step method involving synthesis at 1550 °C for 4 h, trituration, and firing at 1650 °C for 5 h under a nitrogen atmosphere. Nitrogen was doped into LaMgAl₁₁O₁₉ and bonded with aluminium atoms. The nitrided LaMgAl₁₁O₁₉ phosphors showed plate-like morphology with a rough surface and exhibited strong blue emission at 442 nm and 450 nm, which may be attributed to the energy transition between defect levels. A weak emission band at 590 nm was ascribed to the transition between the V_Al acceptor and the valence band, which was excited at 254 nm.     

Decomposing regional productivity growth using an aggregate production frontier

The main contribution of this paper is the implementation of a new model which combines the two parametric approaches most commonly used in the productivity literature: fixed effects and stochastic frontiers. This allows us to discuss whether it is better to use average or frontier functions to estimate regional productivity. The empirical section uses panel data of Spanish regions over the period 1980R11;1995. Additionally, we calculate and decompose total factor productivity growth for the Spanish regions.