Artificial bee colony based algorithm for maximum power point tracking (MPPT) for PV systems operating under partial shaded conditions

Artificial bee colony (ABC) algorithm has several characteristics that make it more attractive than other bio-inspired methods. Particularly, it is simple, it uses fewer control parameters and its convergence is independent of the initial conditions. In this paper, a novel artificial bee colony based maximum power point tracking algorithm (MPPT) is proposed. The developed algorithm, does not allow only overcoming the common drawback of the conventional MPPT methods, but it gives a simple and a robust MPPT scheme. A co-simulation methodology, combining Matlab/Simulink™ and Cadence/Pspice™, is used to verify the effectiveness of the proposed method and compare its performance, under dynamic weather conditions, with that of the Particle Swarm Optimization (PSO) based MPPT algorithm. Moreover, a laboratory setup has been realized and used to experimentally validate the proposed ABC-based MPPT algorithm. Simulation and experimental results have shown the satisfactory performance of the proposed approach.     

一种新的解映射算法的推导和实现

本文在一种16QAM,64QAM,256QAM的解映射算法启发下,提出了新的适合32QAM和128QAM的解映射算法,并在此基础上,给出了适合DVB-C接收机的多QAM解映射结构.然后在FPGA中实现和仿真.最后通过比较说明,相对于传统的查找表解映射方法,提出的解映射算法可以明显减少资源使用率.     

Controlled elements for designing ciphers suitable to efficient VLSI implementation

This work considers the problem of increasing the performance of the ciphers based on Data-Dependent (DD) operations (DDO) for VLSI implementations. New minimum size primitives are proposed to design DDOs. Using advanced DDOs instead of DD permutations (DDP) in the DDP-based iterative ciphers Cobra-H64 and Cobra-H128 the number of rounds has been significantly reduced yielding enhancement of the “performance per cost” value and retaining security at the level of indistinguishability from a random transformation. To obtain further enhancement of this parameter a new crypto-scheme based on the advanced DDOs is proposed. The FPGA implementation of the proposed crypto-scheme achieves higher throughput value and minimizes the allocated resources than the conventional designs. Design of the DDO boxes of different orders is considered and their ASIC implementation is estimated.     

Reconfigurable hardware implementation of a phase-correlation stereoalgorithm

This paper describes the implementation of a stereo-vision system using Field Programmable Gate Arrays (FPGAs). Reconfigurable hardware, including FPGAs, is an attractive platform for implementing vision algorithms due to its ability to exploit parallelism often found in these algorithms, and due to the speed with which applications can be developed as compared to hardware. The system outputs 8-bit, subpixel disparity estimates for 256× 360 pixel images at 30,fps. A local-weighted phase correlation algorithm for stereo disparity [Fleet, D. J.: {Int. Conf. Syst. Man Cybernetics 1:48–54 (1994)] is implemented. Despite the complexity of performing correlations on multiscale, multiorientation phase data, the system runs as much as 300 times faster in hardware than its software implementation. This paper describes the hardware platform used, the algorithm, and the issues encountered during its hardware implementation. Of particular interest is the implementation of multiscale, steerable filters, which are widely used in computer vision algorithms. Several trade-offs (reducing the number of filter orientations from three to two, using fixed-point computation, changing the location of one localized low-pass filter, and using L1 instead of L2 norms) were required to both fit the design into the available hardware and to achieve video-rate processing. Finally, results from the system are given both for synthetic data sets as well as several standard stereo-pair test images.     

流域泥沙的资源化及其实现途径

本文以自然资源的概念和属性为基础，研究了流域泥沙的离散性、吸附性、可搬运性等属性，以及水沙不可分性、水沙不协调性、水沙时空分布不均匀性、水沙产生异源等特征。认为流域泥沙具有自然资源的有效性、可控性和稀缺性等属性，指出流域泥沙具有资源性，是一种特殊的自然资源。当流域泥沙在满足技术和社会等一定条件下，是可以资源化的。提出了实现流域泥沙资源化的目标和途径，其途径主要包括填海造陆、改良土壤和引洪淤灌、淤临淤背和作为建筑材料等。     

The aditi deductive database system

Deductive databases generalize relational databases by providing support for recursive views and non-atomic data. Aditi is a deductive system based on the client-server model; it is inherently multi-user and capable of exploiting parallelism on shared-memory multiprocessors. The back-end uses relational technology for efficiency in the management of disk-based data and uses optimization algorithms especially developed for the bottom-up evaluation of logical queries involving recursion. The front-end interacts with the user in a logical language that has more expressive power than relational query languages. We present the structure of Aditi, discuss its components in some detail, and present performance figures.     

在协议集成测试系统上开展路由协议测试

在分析路由协议的特性及其测试需求的基础上，提出利用窗口黑盒来描述被测协议，利用多通道测试方法扩展对被测实现的控制和观察，通过扩充参考实现增强系统的测试能力。将这些理论，技术应用于系统中，对路由协议开展了有效的测试活动，为国产高性能路由器的开发提供了有力的支持，也进一步增强了PITS系统的功能和适用性。     

产品数据管理(PDM)实施中的存在问题与对策

论述了产品数据管理（PDM）技术发展的历史，讨论了实施PDM的两种目标，并指出PDM在制造业信息化中的地位与作用，阐述了PDM重在实施的原因，根据作者经验，总结了我国企业在实施PDM中存在的4个问题，并从用户和软件厂商两个角度提出了解决这些问题的对策。     

Parallel path consistency

Filtering algorithms are well accepted as a means of speeding up the solution of the consistent labeling problem (CLP). Despite the fact that path consistency does a better job of filtering than arc consistency, AC is still the preferred technique because it has a much lower time complexity. We are implementing parallel path consistency algorithms on multiprocessors and comparing their performance to the best sequential and parallel arc consistency algorithms.^(1,2) (See also work by Kerethoet al. ⁽³⁾ and Kasif⁽⁴⁾) Preliminary work has shown linear performance increases for parallelized path consistency and also shown that in many cases performance is significantly better than the theoretical worst case. These two results lead us to believe that parallel path consistency may be a superior filtering technique. Finally, we have implemented path consistency as an outer product computation and have obtained good results (e.g., linear speedup on a 64K-node Connection Machine 2).     

数控取心软件的设计与实现

介绍SSQ-B数控取心仪软件从DOS操作系统升级到Windows系统的设计与实现.设计采用Visual C 6.0开发工具,使用微软公司提供的活动模板库(ATL)创建实现了各个组件功能模块.详细介绍组件化程序设计和面向对象程序设计思想在数控取心软件中的应用,并利用相关分析法进行曲线自动匹配,结合取心施工工艺流程,采用精确的上提值计算方法,实现取心深度的准确定位.给出了上提值的2种计算方法和曲线的匹配方法.通过在多个油田试用,该软件达到现场取心施工的要求,取心目的层深度误差小于4 cm,实现20 cm薄层的准确定位取心.