Techno-economic feasibility assessment of sorption enhanced gasification of municipal solid waste for hydrogen production

Waste-to-fuel coupled with carbon capture and storage is forecasted to be an effective way to mitigate the greenhouse gas emissions, reduce the waste sent to landfill and, simultaneously, reduce the dependence of fossil fuels. This study evaluated the techno-economic feasibility of sorption enhanced gasification, which involves in-situ CO₂ capture, and benchmarked it with the conventional steam gasification of municipal solid waste for H₂ production. The impact of a gate fee and tax levied on the fossil CO₂ emissions in economic feasibility was assessed. The results showed that the hydrogen production was enhanced in sorption enhanced gasification, that achieved an optimum H₂ production efficiency of 48.7% (T = 650 °C and SBR = 1.8). This was 1.0% points higher than that of the conventional steam gasification (T = 900 °C and SBR = 1.2). However, the total efficiency, which accounts for H₂ production and net power output, for sorption enhanced gasification was estimated to be 49.3% (T = 650 °C and SBR = 1.8). This was 4.4% points lower than the figure estimated for the conventional gasification (T = 900 °C and SBR = 1.2). The economic performance assessment showed that the sorption enhanced gasification will result in a significantly higher levelised cost of hydrogen (5.0 €/kg) compared to that estimated for conventional steam gasification (2.7 €/kg). The levelised cost of hydrogen can be reduced to 4.5 €/kg on an introduction of the gate fee of 40.0 €/t_MSW. The cost of CO₂ avoided was estimated to be 114.9 €/tCO₂ (no gate fee and tax levied). However, this value can be reduced to 90.1 €/tCO₂ with the introduction of an emission allowance price of 39.6 €/tCO₂. Despite better environmental performance, the capital cost of sorption enhanced gasification needs to be reduced for this technology to become competitive with mature gasification technologies.     

Modelling,simulation and identification of an engine air path electromechanical actuator

This paper deals with the modelling and the identification of an electromechanical Diesel engine actuator. The studied Bosch GPA-S actuator is designed for swirl/tumble flaps to control the air amount entering into the cylinder. This study aims to design a complete simulator that reproduces, with sufficient accuracy, the actuator dynamics taking into account the effects of the friction phenomenon. Hence, an overview of the actuator structure and its operation principle is first given. Then, its mathematical model as well as the nonlinearity, related to its behaviour, is discussed. Next, three identification procedures, which allow estimating both the system parameters and the friction model coefficients, are introduced. Finally, simulation results, using MATLAB, and experimental results, using LabVIEW, are presented demonstrating the effectiveness of the proposed techniques.     

Mathematical modelling and numerical simulation of ordered porosity metal materials formation

Ordered porosity metal materials belong to a relatively new class of porous materials named gasars. This paper presents a mathematical model of the complex physical phenomena in the production of gasars. Analyses for heat transfer, solidification kinetics and gas diffusion were coupled to describe the formation of unique gasar structure. Several criterial functions were introduced to provide significant quantitative information about the relationship between the operating technological parameters and the final structure. The computational outcomes of the numerical simulation were compared with the characteristics of real gasar ingots. The model was applied to determine the boundary conditions that would provide approximately constant physical conditions on the solidification front. The structure sensitiveness of gasars with respect to the different technological parameters is discussed.     

A new approach to modelling of single droplet drying

A model was developed to predict the change in droplet mass and temperature when it is exposed to hot air, as in spray drying of droplets containing solids. The droplet was assumed first to undergo sensible rapid heating with no mass change. Then the droplet experiences some shrinkage, with no temperature change but rapid mass losses, followed by a period of crust formation with a significant change in droplet mass and temperature and finally a short period of sensible heating of the dried particle. The model, unlike previous models, accounts for shrinkage and for the temperature distribution in the droplet. It provided a good prediction for the change in droplet temperature and mass for some of the experimental measurements available in the literatures.     

The availability of daylight from tropical skies—a case study of Malaysia

In Malaysia, no long-term daylight data are measured. It was only recently that the need to measure the availability of daylight became urgent when the importance of daylighting in buildings was rediscovered. The hourly daylight availability has been simulated for the Malaysian sky using daylight modelling techniques based on empirical and measured solar irradiation and cloud cover data. This paper presents the techniques involved in producing exterior illuminance data. These data were then compared with measured illuminance at Shah Alam and Bangi, Malaysia. The global illuminance levels are generally high, with values exceeding 80,000 lux at noon during the months when solar irradiation is highest. Even during the months when the ground receives less solar irradiation, the peak illuminance can reach 60,000 lux. Applications and uses of such data are in daylighting design, both for visual and thermal comfort, task illuminance and energy-conscious design of buildings. Recommendations are made at the end of the paper on the various climatic data that are required to be measured for overall daylighting design applications.     

An Approach to Modelling the Forming Process of Sheet Metal-Polymer Composites

Polymer Injection Forming (PIF) and Polymer Injection-Compression Forming (PICF) are new manufacturing technologies for sheet metal-polymer macro-composites, which result from the combination of injection moulding and sheet metal forming. In these processes, a metal blank is formed inside an injection mould by using the pressure of the molten polymer that, after cooling, permanently bonds to the metal sheet creating a fully finished product in only one production step. This paper presents a calibrated multi-physics numerical model of the processes that proves to be suitable to investigate the mutual metal-polymer interactions and to provide a reliable tool in designing the process as well as its control.     

A review on queueing network models with finite capacity queues for software architectures performance prediction

A review is carried out on how queueing network models with blocking have been applied so far into the performance evaluation and prediction of Software Architectures (SA). Queueing network models with finite capacity queues and blocking have recently been introduced and applied as more realistic models of systems with finite capacity resources and population constraints. Queueing network models have been often adopted as models for the evaluation of software performance. Starting from our own experience, we observe the need of a more accurate definition of the performance models of SA to capture some features of the communication systems. We consider queueing networks with finite capacity and blocking after service (BAS) to represent some synchronization constraints that cannot be easily modeled with queueing network models with infinite capacity queues. We investigate the use of queueing networks with blocking as performance models of SA with concurrent components and synchronous communication. Queueing theoretic analysis is used to solve the queueing network model and study the synchronous communication and performance of concurrent software components. Our experience is supported by other approaches that also propose the use of queueing networks with blocking. Directions for future research work in the field are included.     

Ice-slurry production using direct contact heat transfer

An ice slurry generation system was developed using direct contact heat transfer between water and the coolant, Fluroinert FC-84. The location of the coolant nozzle is an important design consideration to avoid clogging due to freezing of water. An ice fraction of up to about 40 percent was obtained with the nozzle located at the bottom of the ice slurry tank and the jet directed upwards into the water. Two simplified model were developed to extract the heat transfer coefficient between the coolant drops and the water. The first model requires as input the average drop diameter and the residence time while the second model uses the measured drop diameter distribution. The estimated heat transfer coefficients are much smaller than those computed using single-sphere correlations.     

The effect of home storage conditions and packaging materials on the quality of frozen green beans

Home storage is the final step of the frozen foods distribution chain, and little is known on how it affects the products quality. The present research describes frozen green beans (Phaseolus vulgaris, L.) quality retention profile during the recommended ‘star marking’ system dates, at the storage temperatures of +5, −6, −12 and −18 °C (along 1, 4, 14 and 60 days, respectively).

The quality profile was assessed by a simulation system. Simulations were set by a response surface methodology to access the effect of different packaging materials (thermal conductivities and thickness), surface heat transfer coefficient, and refrigerator dynamics (effect of refrigeration cycles at the different storage temperatures) on the average retentions of Ascorbic Acid, total vitamin C, colour and flavour.

Green beans quality losses along frozen storage are significantly influenced by temperature, refrigerator dynamics and kinetic properties. Quality is also highly dependent on packaging materials thermal insulation (e.g. at temperatures above the melting point). Temperature cycles inside frozen chambers have a long term effect, and at the higher storage temperatures (e.g. T>−6 °C) are detrimental to frozen green beans quality after shorter periods.     

Building a user model implicitly from a cooperative advisory dialog

This paper reviews existing methods for building user models to support adaptive, interactive systems, identifies sigificant problems with these approaches, and describes a new method for implicitly acquiring user models from an ongoing user-system dialog. Existing explicit user model acquisition methods, such as user edited models or model building dialogs put additional burden on the user and introduce artificial model acquisition dialogs. Hand coding stereotypes, another explicit acquisition method, is a tedious and error-prone process. On the other hand, implicit acquisition techniques such as computing presuppositions or entailments either draw too few inferences to be generally useful, or too many to be trusted.In contrast, this paper describes GUMAC, a General User Model Acquisition Component that uses heuristic rules to make default inferences about users' beliefs from their interaction with an advisory expert system. These rules are based on features of human action and conversation that constrain people's behavior and establish expectations about their knowledge. The application of these rules is illustrated with two examples of extended dialogs between users and an investment advisory system. During the course of these conversations, GUMAC is able to acquire an extensive model of the users' beliefs about the aspects of the domain considered in the dialog. These models, in turn, provide the sort of information needed by an explanation generator to tailor explanations the advisory system gives to its users.