ZJ510L-B汽车用高强度热轧板的试制

珠钢150t电弧炉-LF(VD)-CSP(紧凑式带材生产)流程试生产的5～8mm ZJ510L-B(0．16C--1．22Mn)汽车用高强度热轧板的铁素体晶粒尺寸为6．0～9．2μm，带状组织为1．5～2．5级，强度极限σb562～610MPa，延伸率δ5 32．0％～38．6％。文中还分析和提出了带状组织的形成原因和改进措施。     

双辊式薄带连铸工艺研究

进行了双辊法薄带连铸的试验研究。阐述了双辊连铸机浇注系统的研究结果、工艺参数对连铸的影响，以及18—8不锈钢薄带坯的凝固组织和冷轧特性，该工作为薄带连铸的中间生产机组的研究奠定了基础。     

Computer modeling of the continuous annealing furnace

A computer program to calculate the strip temperature heated in the continuous annealing furnace was developed, using the zone method for radiative heat transfer analysis with the measured gas temperature in the furnace. Using theF _E Operator, the present study considered the effects of soot and transient species, in addition to the H₂O−CO₂ gas mixture on the gas radiative heat transfer. The predicted strip temperature distribution forF _E=1.05 represented well the measured data. The maximum difference in the heat flux transfered to the strip from the combustion gas forF _E=1.0 (without soot and transient species gas radiation) and 1.05 (with soot and transient species gas radiation) was about 15%. The present study also investigated the effects of line speed and thickness variations on the strip temperature, establishing the bases for the on-line computer model.     

热卷箱在梅钢热轧生产中的应用

介绍了梅钢热卷箱的设备组成、技术参数、工作原理及应用效果。热卷箱技术的合理使用，对减小中间坯温降，提高轧制稳定性，节约能源，改善带钢力学性能均匀性，拓展产品规格，提升产品质量，降低生产成本等起到了积极作用。     

国内外薄带连铸技术的发展与现状

文章就法国，美国，日本，意大利，英国，韩国，德国，澳大利亚和中国在薄带连铸工艺，设备和自动控制研究方面的进展作了介绍与分析。     

基于机器视觉的隔热条尺寸测量系统

针对当前隔热条的尺寸测量仍停留在产品离线后,工作人员用卡尺测量,劳动强度大,工作效率低、测量精度易受人为因素影响的现状,本文提出将机器视觉技术引入到隔热条自动化生产线的在线尺寸检测系统中,这种非接触式测量既可以避免在测量过程中对隔热条的损坏,又可以提高测量精度和测量速度,从而达到提高测量效能的目的。     

对地观测卫星成像区域仿真研究

为了发挥对地观测卫星在大面积、实时、快速获取地表数据方面的优势,用户需要事先掌握对于自己感兴趣区域上空的卫星过境情况和成像能力。本文通过对卫星轨道预报模型与算法、卫星地面成像区域边界轨迹计算模型和算法的探讨与实践,得到了一些对卫星成像区域仿真有益的经验。试验证明,对于无侧视情况下,使用较旧的卫星轨道根数来计算卫星成像区域,仍能满足用户对于成像区域预报的精度要求。     

带材的纠偏控制

本文对带钢生产线上常见的带材跑偏现象，进行了详细的分析。对带钢跑偏的原因，进行了研究。同时，对带钢跑偏应采取的措施，也给出了相应的方法。     

异型密封条挤出模头的研制

橡胶异型密封条板式挤出模头设计的关键点是首。何使口模区各胶料质点的出口压力及流速均匀一致和如何确定口模的形状尺寸。根据流变学理论设计出初始口型曲线尺寸、并需进行试挤以修正口型曲线和尺寸。本文以一典型异型密封条挤出模头的研制为例，详细介绍了异型密封条挤出模头的设计方法及基本思路。     

Desalination in the gaza strip: drinking water supply and environmental impact

More than 90% of the population of the Gaza Strip depends on desalinated water for drinking purposes. About 90% of the groundwater is unacceptable for drinking as a result of contamination by nitrate and chloride. One of the major options for resolving the water problems is the utilization of desalination technology for both sea and brackish water. The objective of this article is to address desalination water management in its embryonic stage in the Gaza Strip. The sources of drinking water supply, distribution system and the environmental impact of brine water will be fingered in detail. Desalination facilities range from large seawater plants to small brackish desalination units on a home scale. Governmental, non-governmental and private desalination plants are common. The distribution system of desalinated water is a responsibility of governmental, non-governmental, private small community bodies and even individuals. Disposal of brine water is made either directly or indirectly into the sea, sewage system, poor land, channels, wadies, etc. Brine constituents have an adverse impacton the surrounding environment, e.g., sea life, soil, wastewater treatment plants and the groundwateraquifer. The lack of real environmental impact assessments, especially for mid- and home-scale units may lead to a deterioration of the environment. The fragmentation of the responsibilities of water desalination, distribution of desalinated water and the disposal of brine water suggest that urgent action should be taken (e.g., legislation or establishment of a supervisory body). In other words, strict policies and management actions are to be taken in order to alleviate the health and environmental impact of an important and uncontrolled new system.