Longitudinal permeability determination of dual-scale fibrous materials

In this work, the longitudinal permeability of squarely packed dual-scale fiber preforms is studied theoretically. These fiber preforms are composed of aligned porous tows and the tows are tightly packed. The effective permeability is calculated as a parallel-like network of intra-tow permeability and inter-tow permeability, which are quantified by Darcy’s law and the inscribed radius between tows, respectively. The jump velocity at the interface between inter-tow fluids and porous tows is considered, as derived by substituting Beavers and Joseph’s correlation into Brinkman’s equation. We further examine the effects of intra-tow permeability on the effective permeability of the fibrous system with three interface conditions: (1) interface velocity = 0, (2) interface velocity = mean intra-tow velocity, and (3) interface velocity = jump velocity. The jump-velocity-based model is found to be closest to numerical data. The influence of the fiber volume fraction of tows on the effective permeability is also analyzed.     

Capillary effects on flax fibers – Modification and characterization of the wetting dynamics

Introducing bio-based composites has now become an opportunity of development for industry. Accordingly, Liquid Composite Moulding (LCM) processes are increasingly used for manufacturing those composites, mainly in the transportation industry, since they are considered as effective and low cost routes to manufacture bio-based composites fitting high quality requirements, even for parts with complex shape. However observations of a large amount of voids in bio-based composites call for an improved understanding of the local wetting phenomena that occur during impregnation of the natural reinforcements. The purpose of the present work is to study the influence of flax fiber surface chemistry on the local wetting dynamics. Flax reinforcements were submitted to a thermal treatment to modify the chemical composition of fiber surface. In order to analyze the fiber’s wetting behavior, some methods for measuring apparent static contact angles and surface energy were firstly validated on solids of defined geometry, and subsequently applied to untreated and treated flax fibers. The Owens–Wendt’s approach was used to determine both components of apparent surface energy, indicating polar and dispersive interactions in materials. Subsequently dynamic tests were carried out on both types of chopped flax fibers in order to evaluate apparent advancing dynamic contact angles. Considerations about morphological effects have also been included. Finally bio-based composite plates reinforced with untreated and treated flax quasi-UD were simultaneously fabricated by LCM process, and observation of the porosities highlighted some benefits of using treated flax fibers.     

Cylindrical conformal single-patch microstrip antennas based on three dimensional woven glass fiber/epoxy resin composites

Three dimensional integrated microstrip antenna (3DIMA) can carry the designed load while functioning as an antenna. In this study, the cylindrical conformal single-patch 3DIMAs with various curvatures were designed, simulated, fabricated and tested experimentally using a 3D orthogonal woven glass preform/epoxy resin composite system. The electromagnetic performances of the cylindrical microstrip antennas were analyzed. The simulated and tested results matched well and the return losses of the cylindrical conformal 3DIMAs with radii of curvatures of 60, 45 and 25 mm were less than −10 dB while resonant frequencies and their gain values were significantly influenced by the radius of curvature and the feeding direction. The 3DIMAs with the curvature perpendicular to the feeding directions showed more stable resonant frequencies and larger gain values than those of 3DIMAs with the curvature along their feeding directions.     

Effects of sandblasting distance and angles on resin cement bonding to zirconia and titanium

ObjectivesThe aim of this study was to evaluate effects of sandblasting distance and angles resin to zirconia and titanium bonding.MethodsDensely sintered zirconia and cp2 titanium specimens were prepared and randomly divided into groups, and then sandblasted with various distance (5 mm, 10 mm and 15 mm) and angles (45°, 60°, 75° and 90°). After surface treatment, each specimen surface underwent a silane primer application (RelyX, 3M ESPE), followed by bonding of a resin cement (RelyX Unicem Aplicap, 3M ESPE). Then, each cylindrical resin stub (diameter 3.6 mm×2 mm) underwent a shear adhesive (bond) strength test and surface roughness evaluation. SEM evaluation and EDX analysis were used to observe surface properties of both zirconia and titanium samples. Results were statistically analyzed using analysis of variance (ANOVA) and Turkey test (α=0.05).ResultsSurface roughness showed a significant difference amongst the different distances and angles for both the zirconia and titanium materials and these changes in surface roughness were evident in the SEM imaging photos. As for the adhesive strength, there was a significant difference in the adhesive strength for the titanium and zirconia with different angles. In general, 75° gives the best results although this is not significantly different from 90°. However, no significant difference was observed in changes of sandblasting distance for both materials. EDX analysis at the surface revealed elements carbon, oxygen, silicon, aluminum, and zirconia on the surface.ConclusionsSandblasting at various distance and angles contributes differences in surface roughness when it comes to both zirconia and titanium materials. Despite both 75° or 90° sandblasting angle could yield a sufficiently high adhesive strength for resin to titanium or zirconia bonding, sandblasting at 75° seems to be optimal to increase the adhesive strength.     

Pairing effect and tensile properties of laminated high-performance hybrid composites prepared using carbon/glass and carbon/aramid fibers

Many attempts have been made to fabricate lightweight, high-performance, and low-cost polymeric composites. To improve the mechanical performance of the same material compared to conventional composites, paired hybrid materials were manufactured with different lamination structures. Each of six types of hybrid composite was designed by lamination pairing of carbon/aramid fabric and carbon/glass fabric using VARTM. The dependence of the mechanical properties of the samples on the pairing effects of the lamination structures was investigated. All pairing materials did not lead to a large increase of tensile strength due to the domination of carbon fiber, but the mechanical properties of specific laminates were clearly changed by the particular pairing sequence used. Using the limited material, the design of an effective structure was the central laminating condition with a good tensile and bending properties. Laminating position of the carbon fiber was found to play an important role in the stacking design of hybrid composites.     

四氨酯化合物的合成及其对液体双酚A环氧树脂的流变控制及固化性能的影响

利用羟基(-OH)和异氰酸酯基(-NCO)的简易反应合成了含4个氨酯键(-NHCOO-),两端基为十六碳烷链(-C16H33)的四氨酯化合物,并用作液体双酚A环氧的流变改性剂。利用傅里叶红外(FTIR)、差示量热扫描仪(DSC)、偏光显微镜和扫描电镜(SEM)对四氨酯化合物及其环氧复配物进行了表征分析。通过流变仪、动态力学分析仪(DMA)及万能试验机等对环氧复配物的流变性及其固化物性能进行了研究。结果表明,四氨酯化合物借助氢键作用和范德华力可在液体环氧基体中自组装形成合适及可控的分子聚集体形态,从而实现对液体环氧复配物流变性的有效控制。5%的四氨酯化合物可使环氧复配物拥有与含10%工业用气相二氧化硅(RY200)的环氧复配物一样的触变性。同时,四氨酯化合物的相变特性使其环氧复配物的流变性具有热可逆性。另外,环氧固化性能受四氨酯化合物影响较小。     

5429双马来酰亚胺树脂的固化动力学研究

通过差示扫描量热法(DSC)研究了5429双马树脂的固化过程。分别使用Kissinger模型和Flynn-Wall-Ozawa模型计算得到了5429双马树脂动力学参数。结果表明Kissinger模型与FWO模型计算得到的动力学参数较为接近,验证了两个动力学模型的有效性。由于5429双马树脂的固化反应为一级反应,因此代入相应的固化动力学参数可得到其固化动力学方程。此外,通过T-β外推法可计算得到5429双马树脂凝胶化温度、固化温度和后处理温度等特征温度。     

改性碳酸氢钠形貌及热分解性能的研究

将环氧树脂(EP)对不同粒径的碳酸氢钠(SB)进行包覆改性得到改性碳酸氢钠(EP@SB),采用扫描电镜(SEM)、红外(FTIR)、差示扫描量热法(DSC)和热重(TG),探究不同粒径SB下改性碳酸氢钠形貌及热分解性能。结果表明,不同粒径的SB在EP包覆改性后其热分解性能有明显改善,其中200目的SB改性后效果较理想,起始分解温度从120.1℃升高到155.2℃,提高幅度达35.1℃;分解温度区间从58.6℃缩小到了22.6℃。极大扩宽了轻量化制品的应用范围。     

光固化3D打印离型膜在树脂作用下的变形分析

在光固化光敏树脂成型过程中,聚四氟乙烯离型膜会在树脂液位的波动影响下发生变形,进而影响光固化制件的精度,因此需要减小离型膜在制件过程的变形量,确保其相对稳定。首先分析树脂液位变化,通过液位变化量,等效出树脂液波动带给离型膜的载荷,建立离型膜受力模型。然后基于离型薄膜的挠度变形理论,应用Ansys软件进行模拟研究,对不施加预应力和施加不同预应力作用下的离型膜变形结果分析,结果表明施加预应力有利于提高离型膜稳定性,且施加预应力为2. 645M Pa时离型膜受到树脂波动影响最小,位置精度变化在0. 01 mm。     

The role of an interfacial interpenetrating polymer network formation on the adhesion of resin composite layers in immediate dentin sealing

The aim of this study was to evaluate the influence of chemical and physical processes at the resin-composite and composite-cement interface as a function of the resin composite's water exposure on the bond strength (BS) between these two components. The free-radical concentration was studied using electron paramagnetic resonance (EPR), while the chemical changes at the resin composite's surface were studied using attenuated total-reflection FTIR spectroscopy (ATR-FTIR). The free-radical concentration in the studied samples dropped to 10% in 24 h, indicating that prolonged BS values do not correlate with the free-radical concentration. An alternative bonding mechanism between the resin composite and the composite cement was proposed, based on the formation of an interpenetrating polymer network (IPN) layer at the interface. As proven using ATR-FTIR spectroscopy, changes occurred at the resin composite's surface as a consequence of water exposure, comprising the diffusion of water molecules into the resin composite. These changes reduced the diffusion rate of the composite cement's phosphorus-containing monomers into the resin composite, as shown by the linescan SEM-EDS analysis of phosphorus, thus reducing the thickness of the IPN layer at the interface and consequently reducing the BS between both components.This study reveals that the concentration of free radicals at the surface of the resin composite is only relevant immediately after the polymerisation to the bond strength between the resin composite and the composite cement. Therefore, an alternative explanation is given by applying the theory of the formation of a gradient IPN at the interface between the resin composite and the adhesive cement by changes in the rate of diffusion of the adhesive cement's monomers into the resin composite as a function of the resin composite's exposure to water.