Numerical and experimental investigation of the metering characteristic and pressure losses of the rotary tubular spool valve

This paper presents the results of numerical and experimental performance evaluation of the rotary tubular spool valve. The aim of this work is to develop further the novel design of the tubular spool valve by confirming experimentally the validity of the simulation model and its results, thereby proving the valve's potential to represent a feasible and more efficient alternative to conventionally used translation spool valves avoiding the use of two stage valve configurations. In this research the valve performance is assessed through numerical modelling and experimental studies of its metering characteristic and pressure losses. This paper demonstrates that the used valve model yields the results, which agree well with the conducted experimental study. Therefore, validation of the numerical model and the modelling results in the form of theoretical valve characteristics was accomplished. Firstly, the paper presents details of a numerical approach employed to evaluate valve performance and then analyzes the simulation results. Next, the valve performance is experimentally validated by testing a prototype valve on a hydraulic test rig capable of measuring the volume flow rate, pressure levels in up- and downstream lines of the valve across the entire spool angular stroke. Initially, average discrepancies between modelling and test results were 52.46% for the metering and 82.78% for the pressure loss characteristics. Correcting the model geometry aimed at eliminating differences between the valve model and the practically used prototype-test rig system enabled reduction of the error between experiment and modelling by 47.75% for the pressure loss function. This confirmed validity of the simulated characteristics of the valve. The benchmark comparison of pressure losses confirmed average 71.66% energy dissipation reduction compared to the industry-available analogue valve.     

蝶阀加工及装配工艺的研究

传统工艺加工阀体、活门时，对机床的性能要求较高，一般为数控镗床。介绍了一种采用普通镗床加工阀体、活门的工艺方法及蝶阀在厂内装配的工艺方法。     

Integrating neural network technology and noise analysis

The integrated use of neural network and noise analysis technologies offers advantages not available by the use of either technology alone. The application of neural network technology to noise analysis offers an opportunity to expand the scope of problems where noise analysis is useful and unique ways in which the integration of these technologies can be used productively. The two-sensor technique, in which the responses of two sensors to an unknown driving source are related, is used to demonstration such integration. The relationship between power spectral densities (PSDs) of accelerometer signals is derived theoretically using noise analysis to demonstrate its uniqueness. This relationship is modeled from experimental data using a neural network when the system is working properly, and the actual PSD of one sensor is compared with the PSD of that sensor predicted by the neural network using the PSD of the other sensor as an input. A significant deviation between the actual and predicted PSDs indicate that system is changing (i.e., failing). Experiments carried out on check valves and bearings illustrate the usefulness of the methodology developed.     

引进型国产300MW汽轮机窜轴事故分析及防止对策

通过引进型国产300MW汽轮机在启动试运中出现的一次窜轴事故,根据计算机追忆打印的有关图表、数据分析了产生事故的原因,并提出了为防止类似事故重演应采取的措施和建议。经采取措施后该机组多次又在相同情况下启机,已安全运行。说明分析正确,措施得当,值得同类型机组借鉴。     

阀控式铅酸蓄电池的维护

对阀控式铅酸式蓄电池的维护工作进行了初步探讨。     

加强设备管理 防止阀门泄漏

分析了润滑油加氢装置阀门产生泄漏的原因，针对存在的问题，提出了防止阀门泄漏的方法，确保了装置“两年一修”的长周期安全运行。     

摇臂参数设计方法

建立了中小功率内燃机常用摇臂参数化设计模型。采用可变参数构成摇臂结构，并作结构的有限元网络，此后再进行有限元分析，计算出摇的质量、刚度、转动惯量 力。使摇臂的设计归结为几个主要参数的优选。实例分析表明，计算值和实测值基本相符，优选出的摇避设计优于原设计。     

双瓣止回阀阀瓣强度分析及优化设计

通过对双瓣止回阀阀瓣的有限元分析,介绍了有限元分析法在阀门强度和刚度分析方面的应用。     

An improved bacterial foraging algorithm for combined static/dynamic environmental economic dispatch

Economic dispatch is carried out at the energy control center to find out the optimal output of thermal generating units such that power balance criterion is met, unit operating limits are satisfied and the fuel cost is minimized. With growing environmental awareness and strict government regulations throughout the world, it has become essential to optimize not only the total fuel cost but also the harmful emissions, both, under static as well as dynamic conditions. The static environment economic dispatch finds the optimal output of generating units for a fixed load demand at a given time, while the dynamic environmental economic dispatch schedules the output of online generators with changing power demands over a certain time period (normally one day) so as to minimize these two conflicting objectives, simultaneously. In this paper, the price penalty factor approach is employed for simultaneous minimization of cost and emission. The generator ramp rate constraints, non-convex and discontinuous nature of cost function and the large number of generators in practical power plants, make this problem very difficult to solve. Here, a fuzzy ranking approach is employed to identify the solution which offers the best compromise between cost and emission objectives.     

循环流化床锅炉J形返料阀的试验研究

对循环流化床锅炉J形返料阀以充气口高度、J阀管径和J阀管转弯处圆弧段所包围的角度这3个因素作为影响J阀调节性能的结构因素 ,以物料流量和J阀充气量之间的线性相关系数、回归直线斜率和流量调节范围为优化试验指标 ,通过正交试验获得了J阀的最优结构