DyCrxFe(1-x)O3 nanoparticles prepared by wet chemical technique for photocatalytic applications

DyCr_xFe_(1-x)O₃ (0 ≤ x ≥ 0.4) nanoparticles were prepared using facile chemical route. Structural and morphological evaluation was carried out using X-ray diffraction (XRD) and electron microscopy. Formation of orthorhombic DyFeO₃ nanoparticles was confirmed by XRD with crystallite size of 9–10 nm. FESEM images revealed nearly spherical morphology of the fabricated nanoparticles. Energy dispersive X-ray (EDX) technique was employed to confirm the presence of Dy, Cr, Fe and O elements in DyCr_xFe_(1-x)O₃ nanoparticles. FTIR studies illustrated the presence of characteristics stretching and bending vibrations. UV–visible spectroscopy was used to analyze the photocatalytic performance of the DyFeO₃ and Cr-substituted DyFeO₃ nanoparticles and optical band gap measurements. Photocatalytic activities of the prepared substituted and un-substituted DyFeO₃ nanoparticles were conducted using three different dyes. These dyes were (i) methyl orange, (ii) rhodamine B and (iii) methylene blue. Lower band gap and higher photocatalytic performance was observed for Cr-substituted DyFeO₃ nanoparticles with methylene blue dye.     

Dye adsorption characteristics of alginate/polyaspartate hydrogels

This study examined the removal of some basic dyes, such as Methylene Blue, Malachite Green and Methyl Orange, using alginate or alginate/polyaspartate composite gel beads. The adsorption of dyes from aqueous solutions at 25 °C was examined using a batch sorption technique. The effects of CaCl₂ and the dye concentration on the adsorption were examined. Type-S adsorption isotherms were obtained, which is characteristic of a weak solute–solid interaction. The ionic interaction between the dye molecule and gel matrix appears to be responsible for the efficient adsorption of cationic dyes in this system. These results suggest that an alginate/polyaspartate gel can be used as an effective sorbent for water pollutants such as dyes, and the immobilization of these organic contaminants in the hydrogels from wastewater can solve one of the most important environmental problems in the related industry.     

关于建立纺织用染化料生态安全性评价体系的设想

从可持续发展战略和“绿色”、环保、生态等方面的需要提出关于建立纺织用染化料生态安全性评价体系的意义，并建议了列入安全性评价体系的项目及实施办法，同时也提出了需要解决的问题。     

对硝基苯偶氮2-羟基萘-3-甲酰烷基胺系聚丙烯纤维用红色染料的合成及应用

本文将2,3-酸在甲苯溶剂中用氯化亚砜酰氯化合成2-羟基萘-3-甲酰氯,将其分别和正丁胺、正辛胺、正十二胺和正十八胺反应制得4种不同碳链长度的2-羟基萘-3-甲酰烷基胺,用对硝基苯胺重氮盐与其偶合分别制得了对硝基苯偶氮2-羟基萘-3-甲酰正丁胺、对硝基苯偶氮2-羟基萘-3-甲酰正辛胺、对硝基苯偶氮2-羟基萘-3-甲酰正十二胺和对硝基苯偶氮2-羟基萘-3-甲酰正十八胺系聚丙烯纤维用红色染料。熔点分别为189.8℃、96.2℃、115.8℃和108.1℃;热分解点分别为273.1℃、216.0℃、258.0℃和221.0℃;最大吸收波长分别为515.8nm、516.8nm、513.6nm和514.2nm。在染色条件下,4支染料在聚丙烯纤维上的上染率分别37.6％、41.8％、42.4％和44.7％。     

毛/涤纱分散/酸性(媒染)染料一浴法筒子染色工艺

毛/涤纱分散/酸性(媒染)染料一浴法筒子染色工艺,在100℃条件下能满足毛、涤两种纤维同时上染,染色产品具有着色深浓鲜艳,色泽一致,各项牢度符合要求,对纤维无损伤等优点,从而缩短生产时间,降低成本,提高经济效益。     

蚕蛹蛋白纤维染色性能的研究

由粘胶和蚕蛹蛋白混纺而成的蚕蛹蛋白纤维，采用双活性基活性染料染色，对染色工艺条件作了重点试验。结果表明，pH值和温度是最大的影响因素，该纤维适宜低温、pH值近中性条件下上染和碱性条件下固色。     

Response surface methodology applied for Orange II photocatalytic degradation in TiO2 aqueous suspensions

BACKGROUND: Heterogeneous photocatalysis is influenced by a number of parameters involving synergistic effects; hence, an experimental strategy design that considers interactions between the main variables is needed. The response surface methodology was applied for the investigation of photodegradation of 20 mg L^?1 Orange II in aqueous solutions and for optimization of color removal efficiency. Preliminary studies were performed to identify the parameters to be selected for optimization. RESULTS: The input variables considered for experimental design were: solution initial pH, oxidizing agent (H₂O₂) initial concentration and UV‐A irradiation time. The multivariate experimental design allowed the development of a quadratic response surface model to be used for the prediction of color removal efficiency over the full range of the experimental region. Under the optimum conditions established in the region of experimentation (pH = 6.9, [H₂O₂]₀ = 183 mg L^?1 and t = 32 min), a 100% color removal efficiency was obtained in experiments. CONCLUSIONS: It was found that the variables considered have important effects on color removal efficiency. The results demonstrate that the use of experimental design strategy is indispensable for successful investigation and adequate modeling of the process because the interdependence of the reaction parameters cannot be neglected. Copyright © 2008 Society of Chemical Industry     

活性染料无甲醛固色剂X02的合成与应用

研究了以多乙烯多胺、丙烯酸丁酯、环氧氯丙烷等为主要原料合成、复配的一种无甲醛固色剂以及它的固色工艺条件，结果表明，该固色剂可较好的提高活性染料的皂洗和摩擦牢度均为4-5级，对织物的色光无明显影响．     

Dyestuff—fibre interactions

The strength and nature of dye–fibre interactions vary according to fibre type and dye type. In the case of acid dyes for polyamide fibres, cationic dyes for acrylic fibres, disperse dyes for hydrophobic fibres, and direct dyes for cellulosic fibres, these interactions may be classified as non-covalent, a classification which includes van der Waals (VDW), electrostatic, induction, solvophobic and charge-transfer interactions.
Reactive dyes are a notable exception to the above, since the interaction which is responsible for their excellent wet fastness is the dye–fibre covalent bond, however, these dyes are increasingly viewed as environmentally unfriendly due to high salt usage and residual unfixed colour. This situation may be improved by either incorporating amine sites in the cellulose or by reversing the system to incorporate reactive residues in the fibre and nucleophilic sites in the dye.
Nonionic disperse dyes are valuable for hydrophobic fibres such as polyester but have made little impact on hydrophilic fibres such as silk, wool and cotton. Experiments to develop simple treatments to render the latter fibres disperse dyeable are described and the combined role of solvophobic and – interactions discussed.     

Novel (Phenothiazinyl)Vinyl-Pyridinium Dyes and Their Potential Applications as Cellular Staining Agents

We report here the synthesis and structural characterization of novel cationic (phenothiazinyl)vinyl-pyridinium (PVP) dyes, together with optical (absorption/emission) properties and their potential applicability as fluorescent labels. Convective heating, ultrasound irradiation and mechanochemical synthesis were considered as alternative synthetic methodologies proficient for overcoming drawbacks such as long reaction time, nonsatisfactory yields or solvent requirements in the synthesis of novel dye (E)-1-(3-chloropropyl)-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium bromide 3d and its N-alkyl-2-methylpyridinium precursor 1c. The trans geometry of the newly synthesized (E)-4-(2-(7-bromo-10-ethyl-10H-phenothiazin-3-yl)vinyl)-1-methylpyridin-1-ium iodide 3b and (E)-1-methyl-4-(2-(10-methyl-10H-phenothiazin-3-yl)vinyl)pyridin-1-ium tetrafluoroborate 3a′ was confirmed by single crystal X-ray diffraction. A negative solvatochromism of the dyes in polar solvents was highlighted by UV-Vis spectroscopy and explanatory insights were supported by molecular modeling which suggested a better stabilization of the lowest unoccupied molecular orbitals (LUMO). The photostability of the dye 3b was investigated by irradiation at 365 nm in different solvents, while the steady-state and time-resolved fluorescence properties of dye 3b and 3a′ in solid state were evaluated under one-photon excitation at 485 nm. The in vitro cytotoxicity of the new PVP dyes on B16-F10 melanoma cells was evaluated by WST-1 assay, while their intracellular localization was assessed by epi-fluorescence conventional microscopy imaging as well as one- and two-photon excited confocal fluorescence lifetime imaging microscopy (FLIM). PVP dyes displayed low cytotoxicity, good internalization inside melanoma cells and intense fluorescence emission inside the B16-F10 murine melanoma cells, making them suitable staining agents for imaging applications.