Experimental and numerical investigations on the heat production and thermal storage characteristics of rapid preparation amorphous powder activated coke

The heat production and thermal storage characteristics of rapid-preparation amorphous powder activated coke (RAC) were investigated. RAC was prepared by using a drop-tube reactor system. The natural oxidation characteristics of RAC were studied through combined TG–FTIR analysis and temperature-programmed experiment. Experimental results showed that CO and CO₂ were the main oxidation products of RAC in air, and that the oxidation reaction was in accordance with the Arrhenius equation and law of mass action. Thermal storage characteristics were studied through computational fluid dynamics simulation. The maximum excess temperature θ_max increases linearly with the increase of the initial temperature. The concentration fields of the products show that CO₂ is mainly concentrated in the upper part of the coke bin, and the CO generated by CO₂ at high temperature is mainly concentrated in the central part of the coke bin.     

Review and analysis of the hydrogen production technologies from a safety perspective

Hydrogen can be produced via many different technologies; however, from a safety standpoint there exists no framework for selecting the right technology. Here, we provide a structured framework for assessment of the most desirable hydrogen production technology based on efficiency, safety, and infrastructure, by using a Multi-Criteria Decision-Making (MCDM) integrated Analytic Hierarchy Process (AHP) and life-cycle index (LInX) approach. We apply this modified MCDM approach to steam methane reforming (SMR), autothermal reforming, partial oxidation, alkaline electrolysis, polymer electrode membrane electrolysis, and solid oxide electrolyzer cell processes. Our results show that SMR is the most desirable technology based on the efficiency, safety, and infrastructure criteria. We employ fuzzy set theory to address subjectivity and uncertainty challenges in the data and found that although the technologies based on electrolysis have an environmental advantage, they exhibit higher uncertainties than non-renewable technologies such as SMR. Overall, this new framework addresses the challenge to find the most desirable and safer technology for hydrogen production.     

Status of Mysis diluviana in Lake Ontario in 2013: Lower abundance but higher fecundity than in the 1990s

Mysis diluviana is a major component of prey fish diets in the Great Lakes, so annual production of M. diluviana is important for understanding and modeling energy flow through Great Lakes food webs. However, only three lake-wide measurements of M. diluviana annual production in Lake Ontario are currently available (1971, 1990, 1995). During 2013, lake-wide coverage of Lake Ontario was achieved during four periods from April to November. Annual mean density and biomass of M. diluviana in 2013 were 99?#/m² (SE: 8) and 318?mg?dw/m² (SE: 28) – approximately half of values observed in 1990s. M. diluviana comprised 13–30% of offshore zooplankton biomass in each period. Reproduction peaked in fall, with mean brood size of 32 embryos (range: 11–49), at least 10% larger than in 1990s. Generation time was two years from embryo to initial reproduction. Growth rates were 0.052?mm/d for the age-0 cohort and 0.027?mm/d for the age-1 cohort. Age-0 growth rate was significantly higher than in 1980s–90s (0.035?mm/d). Annual production in 2013 was 0.85?g?dw/m²/yr (SE: 0.03) which was 30–40% of values observed in 1990 and 1995 (2.23 and 2.53?g/m²/yr). Annual production to biomass ratio (P/B) in 2013 was 2.65?/yr which was 80–85% of values observed in 1990 and 1995 (3.24 and 3.11?/yr), but this difference was not statistically significant. Our results suggest that changes in annual production over time can be estimated using changes in biomass over time and a mean P/B ratio.     

简析变压器油的生产工艺及质量

本文简要介绍了变压器油的运用价值,同时分析如何实现对变压器油生产工艺的优化,并从物理性能以及化学性能两个方面分析生产工艺改良后变压器油整体质量,以期为变压器油生产工作提供一定的参考与帮助。     

润滑油基础油的生产工艺及发展趋势

本文主要分析"老三套"生产工艺、异构脱蜡和加氢生产工艺,并探讨我国润滑油基础油生产工艺的发展方向。     

Experimental and theoretical approaches for electrical,magnetic, micromechanical,and structural characterization of BSCCO ceramic superconductors

This study investigates how the preparation and re-pelletization of BSCCO ceramic superconductors affects their structural, magnetic, electrical, and mechanical properties. Samples were prepared using conventional methods including the dry solid state (SS) reaction and wet ammonium nitrate (AN) precipitation, with three variations prepared for each technique. The fabricated samples were then characterized with X-ray powder diffraction (XRD) and scanning electron microscopy. The density, resistance vs. temperature characteristics, AC susceptibility vs. temperature characteristics, and magnetic hysteresis properties were measured. In addition, Vicker's microhardness was measured and revealed that all six samples exhibit the reverse indentation size effect (RISE). Microhardness modeling was also conducted. Calculations with Meyer's law, the Hays and Kendall model, and the proportional sample resistance model indicate that the samples are far from the plateau region, whereas the indentation-induced cracking model was consistent with the experimental results. The elastic modulus, Young's modulus, yield strength, and brittleness index were also calculated for each sample.     

某油田油井采出水腐蚀因素研究

我国油田油井生产中采油井管柱腐蚀现象十分普遍,所以在注CO_2驱进行开采过程中要进行采出水的质量分析。对现阶段的油田生产腐蚀及防腐技术进行论述,提出相对应的防腐措施,进一步为油田生产作业提高产量。     

生产工艺多方案并行与快速转换方法研究

生产系统复杂多变,在生产管理过程中存在多变性和不均衡性。对此,实际生产中需要实现生产工艺多方案并行与快速转换。分析了生产过程变化因素,介绍了主工艺+子工艺这一生产工艺多方案并行与快速转换方法,并通过实例验证了这一方法的有效性。     

面向消费类电子产品的自动化生产线成组技术

针对现代消费类电子产品快速更新换代的现状, 介绍了该类产品的自动化生产线成组技术,阐述了通过度量消费类电子产品相似性和派生性特征,对产线进行成组编码的原理,研究产线工位单元的建模方法,描述了建模内容,并通过有无装载板的产线结构,论述了产线成组编码集成的途径和方法.     

Preventive replacement policies with time of operations,mission durations,minimal repairs and maintenance triggering approaches

When a mission arrives at a random time and lasts for a duration, it becomes an interesting problem to plan replacement policies according to the health condition and repair history of the operating unit, as the reliability is required at mission time and no replacement can be done preventively during the mission duration. From this viewpoint, this paper proposes that effective replacement policies should be collaborative ones gathering data from time of operations, mission durations, minimal repairs and maintenance triggering approaches. We firstly discuss replacement policies with time of operations and random arrival times of mission durations, model the policies and find optimum replacement times and mission durations to minimize the expected replacement cost rates analytically. Secondly, replacement policies with minimal repairs and mission durations are discussed in a similar analytical way. Furthermore, the maintenance triggering approaches, i.e., replacement first and last, are also considered into respective replacement policies. Numerical examples are illustrated when the arrival time of the mission has a gamma distribution and the failure time of the unit has a Weibull distribution. In addition, simple case illustrations of maintaining the production system in glass factories are given based on the assumed data.