抗盐降滤失剂SDX的研究与应用

介绍了抗盐降滤失剂SDX的合成方法与现场应用简况,评价了SDX的抗温、抗盐、防塌及配伍性能。试验结果表明,SDX能耐150℃以上的高温,可抗盐至饱和,具有良好的降滤失和抑制性能,与其它处理剂的配伍性好,适用于各种水基泥浆。     

Oxidation of methane to formaldehyde over Fe/SiO2 and Sn---W mixed oxides

In an attempt to develop new catalysts for the formation of formaldehyde from methane, the promotion effect of Fe on SiO₂ and that of Sn on WO₃ have been studied. The formation of formaldehyde on silica can be appreciably enhanced by the impregnation of Fe, as far as iron loadings are kept below 0.1 atom.% (Fe/Si × 100). In the case of Sn---W---Ox catalysts, both the addition of Sn to WO₃, and that of W on SnO₂ were effective to the selective formaldehyde formation. Absorption spectra (UV-Vis) and ESR measurements revealed that tetrahedrally coordinated Fe³⁺ in the silica network plays an important role in the formation of formaldehyde. A thin surface layer consisting of W and Sn oxides can account for the selective formaldehyde formation on the Sn---W---Ox catalysts.     

低荧光阳离子防塌剂WFT─666的合成与性能

ＷＦＴ－６６６是由磺甲基腐殖酸钾、有机硅聚合物、低分子阳离子有机化合物、苯酚、甲醛缩聚而成的一种新型阳离子低荧光防塌剂。本文介绍了ＷＦＴ－６６６的合成及室内性能评定结果。ＷＦＴ－６６６可抗盐至饱和盐水，抗钙和镁，耐２００℃高温，荧光显示低。用该剂处理的钻井液性能稳定，流变参数合理，页岩回收率高，页岩相对膨胀率低，页岩稳定指数高，与其它处理剂的配伍性好。     

The Danish Twin Apartment Study – Part II: Mathematical modeling of the relative strength of sources of indoor air pollution

Abstract This study deals with the modeling of air pollution in apartments from laboratory measurements of source strengths, using formaldehyde and Total Volatile Organic Compounds (TVOCs) as model pollutants. The sources in two test apartments were grouped into two: building-related sources and occupant-related sources. The measured source strengths and ventilation rates were used for the prediction of concentrations expected in the apartments. These predictions were compared to measurements in the apartment over 12 months. The conclusions were that the model predictions based on emission rates measured in the laboratory can be used to predict the long-term concentration of the two model pollutants in the apartments. Considering the measured differences in ventilation between the apartments, an occupant emission rate of between 0.2 and 0.3 mg/h/kg body weight could be estimated. Based on previous suggested limits of acceptable exposures of humans to VOCs, an acceptable average emission rate of VOCs from building materials in general was estimated to be about 30 (μ/m²/h. The modeling showed that during the first 200 days, building materials dominated the emissions. After this, sources relating to the occupants dominated. On average about half of the VOC pollution originated from the building materials.     

Vanadium species in new catalysts for the selective oxidation of methane to formaldehyde: Activation of the catalytic sites

New vanadium oxide supported on mesoporous silica catalysts for the oxidation of methane to formaldehyde were investigated by infrared and Raman spectroscopies to identify and characterize the molecular structure of the most active and selective catalytic sites. In situ and operando experiments have been conducted in order to understand the redox and hydroxylation/dehydroxylation processes of the vanadium species. (SiO)₂VO(OH) species were identified in these catalysts in reaction conditions and shown to undergo a deprotonation at 580 °C under vacuum, leading to a site giving a photoluminescence band at 550 nm attributed to reverse radiative decay from the excited triplet state:

(V⁴⁺–O⁻)^*  (V⁵⁺O²⁻). An activation mechanism of vanadium monomeric species with electrophilic oxygen species is proposed.     

三聚氰胺的改性及其应用

综述了三聚氰胺对脲醛树脂、酚醛树脂的改性以及改性三聚氰胺在涂料、板材等方面的应用。三聚氰胺可以和其它聚合物发生聚合反应,形成立体网状结构,提高聚合物的强度、韧性、阻燃性等。三聚氰胺可作为改性剂对许多聚合物进行改性,以提高其性能。     

聚甲醛合成新工艺及其应用

用甲醇和回收的稀甲醛合成高纯度的甲缩醛，收率达１００％。再用７０％甲醛液精制合成１００％甲醛，收率达９８％，用于生产三聚甲醛，选择性为９９．６％．用缩醛法生产聚甲醛，单程收率高、产品质量好、工艺简单、消耗低，可大大地降低生产成本。介绍了甲缩醛法生产聚甲醛的新工艺及产品的性质、市场应用；指明了其开发前景。     

Performance and characterization of supported metal catalysts for complete oxidation of formaldehyde at low temperatures

Activities of a series of metals (Pt, Pd, Rh, Cu, Mn) supported on TiO₂ were investigated for the catalytic oxidation of formaldehyde. Among them, Pt/TiO₂ was found to be the most promising catalyst. Nitrogen adsorption, hydrogen chemisorption, X-ray diffraction (XRD), transmission electron microscopy (TEM) and temperature programmed reduction (TPR) by H₂ were used to characterize the platinum catalysts. Using Ce_0.8Zr_0.2O₂, Ce_0.2Zr_0.8O₂, SiO₂ as supports instead of TiO₂, the activity sequence of 0.6 wt.% platinum with respect to the supports is TiO₂ > SiO₂ > Ce_0.8Zr_0.2O₂ > Ce_0.2Zr_0.8O₂, and this appears to be correlated with the dispersion of platinum on supports rather than the specific surface areas of the catalysts. Platinum loading on TiO₂ has a great effect on the catalytic activity, and 0.6 wt.% Pt/TiO₂ catalyst was observed to be the most active, which could be attributed to the well-dispersed platinum surface phase. The reduction temperature greatly affects the particle size and, consequently, the catalytic activity. The smaller particle size of platinum, due to its high dispersion on support, has a positive effect on catalytic performance. Increasing formaldehyde concentration and space velocity exhibits an inhibiting effect on the catalytic activity.     

从甲醛催化剂的改进,展望甲醛工业发展前景

甲醛生产所用催化剂经历了铂催化剂、铜催化剂、浮石银、银网、电解银、铁钼氧化物催化剂的变迁,从不断提高设备生产能力,降低物料消耗,减少环境污染起了积极的推动作用。通过对催化剂性能和制作工艺的比较,简述了我国甲醛工业工艺技术的进展和新技术的前景。