Optimization and efficiency analysis of methanol SOFC-PEMFC hybrid system

In order to improve the power generation efficiency of fuel cell systems employing liquid fuels, a hybrid system consisting of solid oxide fuel cell (SOFC) and proton exchange membrane fuel cell (PEMFC) is proposed. Utilize the high temperature heat generated by SOFC to reform as much methanol as possible to improve the overall energy efficiency of the system. When SOFC has a stable output of 100 kW, the amount of hydrogen after reforming is changed by changing the methanol flow rate. Three hybrid systems are proposed to compare and select the best system process suitable for different situations. The results show that the combined combustion system has the highest power generation, which can reach 350 kW and the total electrical efficiency is 57%. When the power of the tail gas preheating system is 160 kW, the electrical efficiency can reach 75%. The PEM water preheating system has the most balanced performance, with the electric power of 300 kW and the efficiency of 66%.     

Modeling of natural gas fueled quadruple cycle for power applications

Performance improvement being a major need of the power sector aims at increasing efficiency, lowering air pollutants and ultimately cost. This paper explores a quadruple cycle, a hybrid of solid oxide fuel cell integrated with gas turbine, steam turbine and organic Rankine cycle totaling four cycles (SOFC-GT-ST-ORC), fueled primarily by natural gas for stationary power generation. A mathematical model of the configuration of the quadruple cycle is developed and the performance investigated through a parametric study of the thermodynamic components. The power output, efficiency and other results were validated with those found in literature. The quadruple cycle produced an efficiency of 66.1% with 1,1,1,2-tetrafluoroethane, R134a as the organic working fluid. This efficiency exceeded the performance of traditional thermodynamic cycles like single steam cycle, combined and triple cycle at similar operating conditions. Lastly, the quadruple cycle presents a potential for optimization with waste heat recovery.     

ISO9001质量管理体系在质检工作中的应用

ISO9001质量管理体系是指国际标准组织颁布的国际通用标准,是各国质量管理体系制定的参考规范。就当前我国质量管理发展现状来看,ISO9001质量管理体系在质检工作中的应用至关重要。根据自身相关工作经验,并结合广泛的社会实践调查研究,就ISO9001质量管理体系在质检工作的应用展开了相关研究,望能提供借鉴。     

Thermodynamic viability of a new three step high temperature Cu-Cl cycle for hydrogen production

A new three step high temperature Cu-Cl thermochemical cycle for hydrogen production is presented. The performance of the proposed cycle is investigated through energy and exergy approaches. Furthermore, the effects of various parameters, such as the temperatures of the steps of the cycle and power plant efficiency, on various energy and exergy efficiencies are assessed with parametric studies. The results show that the exergy and energy efficiencies of the proposed cycle are 68.3% and 32.0%, respectively. In addition, the exergy analysis results reveal that the hydrogen production step has the maximum specific exergy destruction with a value of 150.9 kJ/mol. The results suggest that proposed cycle may provide enhanced options for high temperature thermochemical cycles by improving thermal management without causing a sudden temperature jump/fall between the hydrogen production step and other steps.     

Thermodynamic analysis and experimental investigation of a unique photoelectrochemical hydrogen production system

In this study, we thermodynamically analyze and experimentally investigate a continuous type hybrid photoelectrochemical H₂ generation reactor. This system enhances solar spectrum use by employing photocatalysis and PV/T. Additionally, by replacing electron donors with electrodes to drive the photocatalysis, the potential of pollutant emissions are minimized. In this study, the present reactor is tested under electrolysis operation during which the present reactor is investigated under three different inlet mass flow rates (0.25, 0.50, and 0.75 g/s) and four different operating temperatures (20, 40, 60, and 80 °C). Some parametric studies are run by varying the environmental temperature between 0 and 40 °C. In addition, the impact of coating the membrane electrode assembly of the reactor with Cu₂O is investigated. The present results show that the highest energy and exergy efficiencies occur at the environmental temperature of 20 °C which is about 60% and 50%, respectively. The Cu₂O coated membrane gives a lot higher current readings, meaning that the coating makes the membrane more conductive and increases H₂ production by permitting ions at a higher rate.     

Rate-distortion-complexity optimization for x265

Rate-distortion optimization (RDO) is conventionally based on the analysis of rate-distortion (R-D) curve to minimize the coding distortion under the coding bits constraint. However, it is necessary to consider the computational complexity in the RDO process. In this paper, we obtain the Confidence LEvel - Computational complexity (CLEC) curves which indicate the characteristics of coding tree units (CTUs). Based on the CLEC curves, a rate-distortion-complexity optimization (RDCO) algorithm is proposed to optimize R-D under given computational complexity and achieve the optimal coding performance for x265. Experimental results demonstrate that the proposed algorithm can achieve a wide range of encoding speed under a given quantization parameter (QP) whereas the original x265 can only achieve a few fixed encoding speeds, and the proposed algorithm can reduce the BD-rate and increase the BD-PSNR by 6.59% and 0.13 dB on average under the same requirements of encoding speeds as the original x265.     

Wind of change: Small-scale electricity production and distribution-grid efficiency in Sweden

In this paper, we measure the technical efficiency for local electricity distribution firms in Sweden, and in particular how small and micro-scale generation affects efficiency scores. Using a two-stage data envelopment analysis to model the technical efficiency and a double bootstrap approach to estimate the determinants of inefficiencies, we show that firms are heterogeneous in terms of inefficiency, but that a large share of small and micro-scale generation is not associated with more inefficient operations.     

A solar and wind driven energy system for hydrogen and urea production with CO2 capturing

A novel solar PV and wind energy based system is proposed in this study for capturing carbon dioxide as well as producing hydrogen, urea and power. Both Aspen Plus and EES software packages are employed for analyses and simulations. The present system is designed in a way that PEM electrolyzer is powered by the wind turbines for hydrogen production, which is further converted into ammonia and then synthesizes urea by capturing CO₂ and additional power is supplied to the community. The solar PV is employed to power the cryogenic air separation unit and the additional power is used for the industrial purpose. In the proposed system, ammonia does not only capture CO₂ but also synthesizes urea for fertilizer industry. The amount of electrical power produced by the system is 2.14 MW. The designed system produces 518.4 kmol/d of hydrogen and synthesizes 86.4 kmol/d of urea. Furthermore, several parametric studies are employed to investigate the system performance.     

Analysis and assessment of an advanced hydrogen liquefaction system

In the present work, an advanced hydrogen liquefaction system with catalyst infused heat exchangers is proposed, analyzed and assessed energetically and exergetically. The analysis starts with exergetic considerations on hydrogen liquefaction using different alternatives of pre-cooling including the conversion from normal to parahydrogen. It further explains the fundamentals of a proposed liquefaction process. The goal is then to assess the proposed system, make modifications and improve the system. The present system covers all of these portions of a hydrogen liquefaction system with an ultimate goal of achieving a sustainable and environmentally harmless system. The proposed hydrogen liquefaction system is simulated in the Aspen Plus and the performance of the system is measured through energy and exergy efficiencies. The resulting energy efficiency of the system is calculated to be 15.4%, and the exergy efficiency of the system is found to be 11.5%.