Convolutional Neural Network Auto Encoder Channel Estimation Algorithm in MIMO-OFDM System

Higher transmission rate is one of the technological features of prominently used wireless communication namely Multiple Input Multiple Output-Orthogonal Frequency Division Multiplexing (MIMO–OFDM). One among an effective solution for channel estimation in wireless communication system, specifically in different environments is Deep Learning (DL) method. This research greatly utilizes channel estimator on the basis of Convolutional Neural Network Auto Encoder (CNNAE) classifier for MIMO-OFDM systems. A CNNAE classifier is one among Deep Learning (DL) algorithm, in which video signal is fed as input by allotting significant learnable weights and biases in various aspects/objects for video signal and capable of differentiating from one another. Improved performances are achieved by using CNNAE based channel estimation, in which extension is done for channel selection as well as achieve enhanced performances numerically, when compared with conventional estimators in quite a lot of scenarios. Considering reduction in number of parameters involved and re-usability of weights, CNNAE based channel estimation is quite suitable and properly fits to the video signal. CNNAE classifier weights updation are done with minimized Signal to Noise Ratio (SNR), Bit Error Rate (BER) and Mean Square Error (MSE).     

Computing approximate blocking probabilities for transparent waveband switching based WDM networks using hierarchical cross-connects

An analytical model is presented to study the dynamics of wavelength division multiplexing (WDM) networks with waveband switching (WBS). The reduced load approximation method is considered to compute approximated network blocking probabilities in WBS-based WDM networks. The analytical model considers the link blocking probability due to insufficient link capacity and an impact of the waveband granularity (G). The analytical model also considers the node blocking probability due to unavailability of a switch port at the wavelength cross connect (WXC) layer of an Hierarchical cross connect (HXC) switch node. The set of nonlinear equations is obtained with the link independence assumption and solved using repeated substitutions. The accuracy of the analytical model is examined by comparing with simulation results considering the random-fit algorithm for waveband and wavelength assignments in different network scenarios. Lightpaths are routed between source and destination (s-d) HXC switch nodes using shortest path first (SPF) routing. An impact of the switch parameter to limit the input and the output WXC switch ports of an HXC switching node is also being investigated using the analytical model as well as through simulation results.     

掘进工作面瓦斯分级治理的技术研究

余吾煤业公司作为高瓦斯矿井,瓦斯吸附能力强,属低透气性难抽放煤层。矿井目前处于新旧采区重叠期、瓦斯含量双向变化重叠期,需要立足当前、分类施策,提升采掘效率。为进一步规范掘进工作面瓦斯治理,建立规范的瓦斯治理程序,介绍了掘进工作面瓦斯分级治理相关措施,确保掘进工作面安全生产有序进行。     

Modeling,design, and optimization of a cost‐effective and reliable hybrid renewable energy system integrated with desalination using the division algorithm

People in the Middle East are facing the problem of freshwater shortages. This problem is more intense for a remote region, which has no access to the power grid. The use of seawater desalination technology integrated with the generated energy unit by renewable energy sources could help overcome this problem. In this study, we refer a seawater reverse osmosis desalination (SWROD) plant with a capacity of 1.5 m³/h used on Larak Island, Iran. Moreover, for producing fresh water and meet the load demand of the SWROD plant, three different stand‐alone hybrid renewable energy systems (SAHRES), namely wind turbine (WT)/photovoltaic (PV)/battery bank storage (BBS), PV/BBS, and WT/BBS are modeled and investigated. The optimization problem was coded in MATLAB software. Furthermore, the optimized results were obtained by the division algorithm (DA). The DA has been developed to solve the sizing problem of three SAHRES configurations by considering the object function's constraints. These results show that this improved algorithm has been simpler, more precise, faster, and more flexible than a genetic algorithm (GA) in solving problems. Moreover, the minimum total life cycle cost (TLCC = 243 763$), with minimum loss of power supply probability (LPSP = 0%) and maximum reliability, was related to the WT/PV/BBS configuration. WT/PV/BBS is also the best configuration to use less battery as a backup unit (69 units). The batteries in this configuration have a longer life cycle (maximum average of annual battery charge level) than two other configurations (93.86%). Moreover, the optimized results have shown that utilizing the configuration of WT/PV/BBS could lead to attaining a cost‐effective and green (without environmental pollution) SAHRES, with high reliability for remote areas, with appropriate potential of wind and solar irradiance.     

Analysis of Radio over Fiber system for mitigating four-wave mixing effect

In this paper, an efficient 8-channel 32Gbps RoF (Radio over Fiber) system incorporating Bessel Filter (8/32 RoF-BF) has been demonstrated to reduce the impact of non-linear transmission effects, specifically Four-Wave Mixing (FWM). The simulation results indicate that the proposed 8/32 RoF-BF system provides an optimum result w.r.t. channel spacing (75 GHz), input source power (0 dBm) and number of input channels (8). In comparison with the existing RoF system, the proposed 8/32 RoF-BF system has been validated analytically and it is found that the performance of the proposed system is in close proximity particularly in FWM sideband power reduction of the order of 4 dBm for the 8-channel 32Gbps RoF system.     

A three-stage graphics processing unit-based finite element analyses matrix generation strategy for unstructured meshes

With the development of parallel computing architectures, larger and more complex finite element analyses (FEA) are being performed with higher accuracy and smaller execution times. Graphics processing units (GPUs) are one of the major contributors of this computational breakthrough. This work presents a three-stage GPU-based FEA matrix generation strategy with the key idea of decoupling the computation of global matrix indices and values by use of a novel data structure referred to as the neighbor matrix. The first stage computes the neighbor matrix on the GPU based on the unstructured mesh. Using this neighbor matrix, the indices and values of the global matrix are computed separately in the second and third stages. The neighbor matrix is computed for three different element types. Two versions for performing numerical integration and assembly in the same or separate kernels are implemented and simulations are run for different mesh sizes having up to three million degrees of freedom on a single GPU. Comparison with GPU-based parallel implementation from the literature reveals speedup ranging from 4× to 6× for the proposed workload division strategy. Furthermore, the same kernel implementation is found to outperform the separate kernel implementation by 70% to 150% for different element types.     

油藏开发地质勘探的常见问题分析

就油藏开发地质勘探的常见问题进行分析,从油藏开发的分类、油藏开发程序以及油藏储量计算等方面综合考虑影响油藏开发的因素,为现实油藏开发工程提供理论依据,提升油藏开发技术水准。     

部分传输序列的遗传模拟退火搜索方法

在正交频分复用(OFDM)系统中,基于遗传算法的部分传输序列(GA-PTS)技术有效地降低了 PTS 的计算复杂度,但在 改进峰值-平均功率比(PAPR)性能方面却并不理想。 为此,提出在遗传算法中嵌入模拟退火(SA)算子从而构造一种混合的遗 传模拟退火(GSA)算法,并把它应用于对 PTS 的最优相位因子进行搜索。 首先,通过对 PTS 相位因子编码形成染色体,采用随 机元素组成的染色体作为遗传算法的初始群体,并评估每个染色体的适应度值。 然后,根据适应度值选择染色体,建立染色体 的变异规则和交叉规则,对群体进行迭代进化。 最后,群体中的染色体利用退火温度进行更新,从而产生出新的下一代种群。 仿真结果说明,与 GA-PTS 方案相比,该方法不仅能降低计算负担,而且能够有效地降低 OFDM 系统 PAPR 值。