集中药包与条形药包爆破漏斗及抛掷堆积研究

把集中药包拉成条形药包之后，其爆破漏斗变化有多大?条形药包能否改善抛掷堆积?可否用集中药包的爆破漏斗参数(n、R、R’、P)及经验方法来设计条形药包的爆破漏斗?本试验研究将回答这些问题。     

防止干燥塔塔顶及锥节产生焦粉的方法

描述及分析了干燥塔在生产乳粉过程中出现的塔顶及锥节焦粉现象，并提出了改进方法。     

HP700圆锥破碎机动锥的有限元分析

对HP700圆锥破碎机的主要部件动锥建立了有限元分析模型，用ANSYS软件对动锥进行了有限元强度和刚度分析，结果输出了动锥分布及变形图，对圆锥破碎机的结够设计提供了依据。     

漏斗贮料压力计算公式

本文从平衡条件和常系数假定出发，建立贮料压力微分方程，导出了正倒锥漏斗、倒锥漏斗贮料压力计算公式。文中说明，圆柱仓筒贮料压力微分方程为上述方程的特殊情形。本文成果可供筒仓工程设计使用，还可供确定斗口给料机贮料荷载参考。     

承压水漏斗地区地下水位时空分布预报的BP网络模型

依据水均衡原理，导出承压水漏斗区任意一点水位与其影响因素之间的复杂的非线性关系，在此基础上提出承压水漏斗水位时空分布预报的BP神经网络模型。该模型具有 分布参数模型的特征，且不需用到区域的水文地质参数。最后针对某实例进行了模型设计及预报分析，通过对部分观测井后期实测数据的训练，优选出双隐层的网络结构及其网络参数。随后用这些观测井的前3年数据进行了检验，并对其他观测井数据进行预报。计算表明，该模型对地下水位拟合与预报的合格率较高，可以获得研究区域某一时刻水位在空间上的分布。     

牙轮钻头压力补偿系统的发展

钻头轴承的寿命不仅取决于轴承材质，更取决于工作环境。密封圈的作用是将泥浆隔离在轴承腔之外，使轴承能工作在一个良好环境中。轴承失效的主要原因是密封圈先期失效，密封圈失效除其自身质量外，主要与密封圈两侧的压差有关，过大的压差是造成密封圈失效的主要原因。介绍了减小压差的压力补偿系统结构的发展。     

Prediction of fire classification for wood based products. A multivariate statistical approach based on the cone calorimeter

Wood has long traditions as a building material, and is often used in construction elements, and as interior and exterior surfaces in the Nordic countries. In most applications, there are reaction to fire requirements to products used as surfaces, e.g. in escape routes and larger public spaces. Most wood products will therefore have to be treated with fire retardant (FR) agents to fulfil the strict requirements to properties connected to heat release and flame spread. Unfortunately, FR agents usually also increase the smoke production, as they cause a more incomplete combustion of the wood. The wood product manufacturers seek to find the optimal amount of FR additives where both heat release and smoke production in the classifying test are within the requirements given in the building regulations. This paper describes models for prediction of the European reaction to fire classes of wood products. The models are based on multivariate statistical analysis, and use test results from the cone calorimeter test as input. The presented models are, with very good precision, able to predict which Euroclass and additional smoke class a wood based product would obtain if it were to be tested in the single burning item test. Copyright © 2006 John Wiley & Sons, Ltd.     

牙轮钻头的岩屑破碎机理及可钻性的分形法

为满足优质高速钻井的要求,需要对岩石可钻性做出快捷、精确的判断。利用分形几何理论,研究了钻井过程中牙轮钻头的破岩机理以及岩屑的等破碎概率问题;依据Bond裂纹学说,提出了一种以井底返出的岩屑为对象的岩石可钻性测试方法,并建立了岩石可钻性极值和岩屑分形维数的关系模型。室内实验表明:微钻头岩石可钻性级值与破碎岩屑分形维数存在明显的相关性,由此制定了一个基于岩屑粒度分布分形维数表示的岩石可钻性预测指标。经现场检验,分形法确定岩石可钻性级值具有较高的精度。这表明钻井过程中上返岩屑的分形维数能反映岩石可钻性程度,可以用分形维数衡量岩石可钻性大小。     

Assessing the performance of intumescent coatings using bench‐scaled cone calorimeter and finite difference simulations

A method was developed to assess the heat insulation performance of intumescent coatings. The method consists of temperature measurements using the bench‐scaled experimental set‐up of a cone calorimeter and finite difference simulation to calculate the effective thermal conductivity dependent on time/temperature. This simulation procedure was also adapted to the small scale test furnace, in which the standard time–temperature curve is applied to a larger sample and thus which provides results relevant for approval. Investigations on temperature and calculated effective thermal conduction were performed on intumescent coatings in both experimental set‐ups using various coating thicknesses. The results correspond to each other as well as showing the limits of transferability between both fire tests. It is shown that bench‐scaled cone calorimeter tests are a valuable tool for assessing and predicting the performance of intumescent coatings in larger tests relevant for approval. The correlation fails for processes at surface temperatures above 750°C, which are not reached in the cone calorimeter, but are attained in the small scale furnace set‐up. Copyright © 2006 John Wiley & Sons, Ltd.