Stability analysis and characterization of the nano emulsified Jatropha-curcas-based bio-fuel

This work investigates the suspension duration of the nanosized multiwalled carbon nanotubes (MWCNT) and aluminum oxide (Al₂O₃) in B20, B50 and B70 blends of Jatropha Methyl ester. The MWCNT and aluminum oxide (Al₂O₃) are added to the fuel blends in the proportions of 50 and 100 pmm separately by ultra sonication. The prepared fuel samples are characterized, and turbidity analysis was done to find the stability rate of nano-additives. The outcomes reveal the maximum stability rate for MWCNT and Al₂O₃ as 83.3% and 87.03%, respectively, with 50ppm in B20 over a period of eighteen days. A considerable drop in suspension was observed with the 100 ppm MWCNT and Al₂O₃ biodiesel blends.     

汽车电磁式主动悬架技术综述

电磁式主动悬架兼具控制精确、系统响应快和节能高效等优点,对悬架运动的控制能力强,可以显著提升车辆的舒适性和操稳性。随着新能源汽车、电控系统以及悬架减振技术的发展,电磁式作动器在汽车悬架系统上的应用开始受到关注。文中对汽车电磁式主动悬架技术的研究和应用现状进行回顾和分析,并对其应用前景进行展望。     

基于多参数特征保留的载荷谱加速耐久性编辑

为了得到时间更短加载效果相同的加速耐久性试验载荷谱,提出了基于多参数特征保留的载荷谱编辑方法。该方法同时考虑载荷谱的损伤、功率谱密度以及统计参数等信息,对零部件载荷谱的时间进行压缩。以汽车悬架螺旋弹簧的载荷谱为例,采用该方法进行缩减,同时从多个参数特征方面与传统的基于损伤保留的编辑方法所得到的载荷谱进行对比。为了进一步验证编辑效果,采用编辑谱和原始谱对弹簧进行疲劳仿真。结果表明,该方法能够有效缩短汽车零部件的载荷谱,可得到与原始载荷谱具有相同加载效果的编辑载荷谱。     

采用磁流变阻尼器的人体座椅悬架系统模糊ANFIS-PID复合控制技术研究

对座椅悬架用单出杆式磁流变阻尼器进行阻尼特性试验,并借助MATLAB多项式拟合工具箱对改进多项式模型中未知参数进行辨识。分析人体振动特性,建立五自由度人体座椅悬架模型。综合模糊控制器与自适应模糊神经推理系统(Adaptive Neuro-Fuzzy Inference System,ANFIS)整定PID控制器的优点,提出一种模糊ANFIS-PID复合控制策略。采用正弦信号作为外界激励,分别对被动悬架、传统模糊控制、ANFIS-PID控制及模糊ANFIS-PID复合控制人体座椅悬架系统进行仿真分析。结果表明,辨识得出的参数和建立的改进多项式模型均可满足后续仿真要求;采用模糊ANFIS-PID复合控制策略的隔振效果明显优于传统模糊控制及ANFIS-PID控制,能有效改善人体座椅悬架系统的行驶平顺性及驾乘人员乘坐舒适性。     

Decreasing Filter Cake Resistance by Using Packing Structures

Packed beds used in absorption columns are evaluated to determine whether they can also be beneficial for cake‐forming filtrations. To assess this, model systems are characterized and separated by using a dead‐end filter cell. Filtrations are conducted with different packings; the filtrate amount over time and resulting turbidity are evaluated. Packings increase the filter cake resistance and the separation time of the cakes formed with approximately incompressible solids. However, they exhibit a positive effect on the filtration of a more complex, compressible substance; the process is not only accelerated, but also the quality of the obtained filtrate is not compromised. These results demonstrate potential in the use of packed beds for the filtration of complex biogenic suspensions.     

Porous ceramics with tailored pore size and morphology as substrates for coral larval settlement

The growing demand for stony corals as ornamental aquarium animals requires defined aquacultural breeding strategies. For the sexual propagation of corals, material substrates are needed, that attract larvae and support their settlement and development. In this study, five types of highly porous ceramic materials were developed following the example of coral skeleton. The applicability of these settlement substrates was tested using larvae of the stony coral Pocillopora damicornis. Partial sintering of pressed clay pellets, freeze casting of clay and alumina-mullite based slurries and direct foaming of high alkane phase emulsified suspensions (HAPES) using alumina were employed. By the addition of mm-sized spherical polystyrene beads as sacrificial templates during freeze casting (alumina-mullite), superficial pores in the size of the larvae were created. The inorganic substrates featured open porosities between 35% (pressed clay) and 83% (foamed alumina), pore sizes ranging from nm to mm-scale and pore morphologies dominated by interparticle porosity (pressed), lamellar pores (freeze casting) and cellular pore types (direct foaming). The ceramic substrates were incubated in artificial sea water for 3 months to induce necessary biofilm formation and algae growth. Afterwards, individual substrates were exposed to 5 coral larvae, and their settlement behavior was monitored over 14 days. At the end of this period, all ceramic materials were successfully accepted as settlement substrates, with a mean settlement rate of 46.2%, and no significant differences between the substrate types. On samples with large surface superficial pores, a significantly reduced survival of settled larvae (79%) compared to the other porous materials (93–98%) was determined, suggesting a non-ideal surface topography. While alumina foam samples (HAPES) exhibit the most promising results in terms of settlement and survival of larvae, clay-based substrates provide a more economic solution for the sexual propagation of corals in aquaculture.     

高温悬浮态下石灰石与菱镁矿热分解 特性比较及动力学研究

利用悬浮态高温炉,对比研究了菱镁矿及石灰石的热分解特性,探讨了其热解模型及动力学参数。结果表明:低温段(650~750℃)时,菱镁矿比石灰石易分解,达到一定高温后其分解速率相差不大;菱镁矿、石灰石在悬浮态下的热解机理均符合收缩核模型,其活化能分别为50 kJ/mol、79 kJ/mol;随着菱镁矿粒度的增大,其分解速率趋缓,分解表观活化能增大。     

Hetero-assembly of colloidal particles in concentrated non-aqueous suspensions by polymer dispersant design

Although many colloidal assembling systems have been reported, most systems suffer from severe aggregation under high solid concentrations, which can often be observed in typical hetero-aggregation system. In this study, we created a hetero-assembly system using concentrated (~50 vol%) suspensions by mixing large SiO₂ particles modified with polyacrylic acid partially complexed with oleylamine (PAA-OAm) and small SiO₂ particles modified with polyethyleneimine partially complexed with oleic acid (PEI-OA) in a non-aqueous solvent. We demonstrated that hetero-assembly is driven by the interactions between the uncomplexed carboxyl/amine groups of the PAA/PEI present on the particles, while severe aggregation is simultaneously prevented by the steric repulsions of the aliphatic oleyl chains. Comparison of the cross sections of the in-situ solidified hetero-assembled suspensions with those of ideally assembled structures which were reproduced by a simulation considering the statistical distribution of particles strongly supported successful particle assembling via the proposed approach. The results revealed that the OA content in the PEI-OA complex was the dominant factor that controlled the dispersion and assembling state of the binary particles. The significance of this study is that our findings will provide a class of colloidal dispersion state which binary particles were assembled in a high solid content suspension without forming strong aggregates.