Location Related Signals with Satellite Image Fusion Method Using Visual Image Integration Method

Investigations were performed on a group utilizing (General Purpose Unit) GPU and executions were evaluated for the utilization of the created parallel usages to process satellite pictures from satellite Landsat7.The usage on a realistic group gives execution change from 2 to 18 times. The nature of the considered techniques was assessed by relative dimensionless global error in synthesis (ERGAS) and Quality Without Reference (QNR) measurements. The outcomes demonstrate execution picks ups and holding of value with the bunch of GPU contrasted with the outcomes and different analysts for a CPU and single GPU. The errand of upgrading the view of a scene by combining data caught from various picture sensors is usually known as multisensor picture combination. This paper displays a territory based picture combination calculation to consolidate SAR (Synthetic Aperture Radar) and optical pictures. The co-enlistment of the two images is first led utilizing the proposed enrollment method prior to picture combination. The paper displays a parallel execution of existing picture combination techniques on a graphical group. Parallel executions of techniques in view of discrete wavelet changes are created. Division into dynamic and motionless regions is then executed on the SAR surface picture for particular injection of the SAR picture into panchromatic (PAN) picture. An integrated image in view of these two pictures is produced by the novel region based combination plot, which forces diverse combination rules for each fragmented region. At long last, this picture is melded into a multispectral(MS) picture through the half breed skillet honing technique proposed in past research. Exploratory outcomes exhibit that the proposed strategy demonstrates preferred execution over different fusion algorithms and can possibly be connected to the multisensory combination of SAR and optical pictures.     

基于广义二次互相关的低信噪比信号时延估计

针对时延估计精度受噪声影响,导致时延估计不准确的问题,在现有广义二次相关算法的基础上,提出了一种改进的广义二次相关算法,通过将二次相关函数先做指数运算,降低噪声干扰,再将傅里叶逆变换得到的相关函数做高次方运算,达到锐化峰值提高时延正确率的目的。仿真结果表明,信噪比(SNR)在0~10 dB时,改进算法的均方根误差明显优于广义二次相关算法,正确率相比于广义二次相关算法也显著提高,且在更低SNR的情况下仍然具有一定优势。     

THE PRINCIPLE OF DIAMOND DRILLING

ＴＨＥＰＲＩＮＣＩＰＬＥＯＦＤＩＡＭＯＮＤＤＲＩＬＬＩＮＧＬｉＳｈｉｚｈｏｎｇＣｈｉｎａＵｎｉｖｅｒｓｉｔｙｏｆＧｅｏｓｃｉｅｎｃｅｓ，Ｂｅｉｊｉｎｇ，１０００８３，ＣｈｉｎａＴＨＥＰＲＩＮＣＩＰＬＥＯＦＤＩＡＭＯＮＤＤＲＩＬＬＩＮＧＬｉＳｈｉｚｈｏ...     

单颗团聚CBN磨粒磨削TC4钛合金表面创成机制

目的 提出一种兼具耐磨性好、自锐性能优异的新型团聚CBN磨粒研制方法,解决单晶CBN磨粒因其力学特性各向异性而极易出现沿解理面大块破碎的问题,进而提升加工效率和磨削性能。方法 利用模压成形和高温液相烧结技术,制备了综合性能优异的新型团聚CBN磨粒,探究磨粒结合界面形成机制,并通过单颗磨粒磨削TC4钛合金试验,综合对比团聚CBN磨粒与单晶CBN磨粒的磨损状态和磨痕形貌,探明团聚CBN磨粒的磨削性能优势。结果 团聚CBN磨粒烧结界面新生成了TiB2、TiB和TiN;优选的烧结工艺参数为800 ℃,保温时间为10 min;相比于单晶CBN磨粒,团聚CBN磨粒的耐磨性和锋利度显著提升,磨削加工效率和质量明显改善。结论 由于团聚CBN磨粒内部微晶颗粒间金属结合剂的存在,提高了磨粒的断裂韧性,降低了因磨粒内部裂纹扩展而引起的宏观裂纹损伤深度,有效提升了磨粒的加工性能;磨削过程中随着磨粒的不断磨损,未出露的CBN晶粒逐渐参与磨削,确保了磨粒工作面有效磨粒数的动态平衡,有助于提升磨粒整体自锐能力。     

Optimized analysis of sharpening characteristics of a compact RF pulse source based on a gyro-magnetic nonlinear transmission line for ultrawideband electromagnetic pulse application

We constructed a compact high-power RF pulse generator based on a gyro-magnetic nonlinear transmission line (GNLTL) to produce a high-voltage pulse with a sub-nanosecond rise time and a relatively high repetition rate, which shows great potential for application in the high-power ultrawideband electromagnetic effect, etc. The influence of incident pulse parameters (rise time and voltage amplitude) and line length on the sharpening characteristics of the GNLTL were investigated experimentally to optimize the rising rate of the modulated pulse front. Based on the GNLTL equivalent circuit model consisting of an LC ladder network, the rise time, the voltage conversion coefficient and the rising rate properties of a modulated pulse were also numerically analyzed in a wider range. The results show that a>90 kV RF pulse with a rise time of 350 ps and a repetition rate of 1 kHz in burst mode is produced by the GNLTL at an axial biasing magnetic field of 22 kA m⁻¹ and a line length of 30 cm under the condition of a 70 kV incident pulse. Applying a faster and higher incident pulse is conducive to improving the sharpening effect of the GNLTL. Furthermore, within a certain range, increasing the line length of the GNLTL not only reduces the rise time, but increases the voltage conversion coefficient and the rising rate of a modulated pulse. Furthermore, considering the energy loss of ferrite rings, there is an optimal line length to obtain the fastest rising rate of a modulated pulse front edge.     

ORDERING FUZZY SETS BY CONSENSUS CONCEPT AND FUZZY RELATION EQUATIONS

A general class of consensus measures of fuzzy sets is introduced in this paper. It is shown that, while the consensus measures are valuations but neither isotone nor antitone with respect to the lattice structure induced by the pointwise maximum and minimum operations to the set of all the fuzzy sets on a nonempty crisp set, they are antitone valuations with respect to the lattice structure induced by the generalized sharpening relation to a quotient set of the set of fuzzy sets. It is also shown that the solutions of a finite fuzzy relation equation that have the maximum consensus measure can be characterized through the join operation of the latter lattice in terms of the maximum solution and some of the minimal solutions of the equation.     

Physics‐based spectral sharpening through filter‐chart calibration

The spectral overlap of color‐sampling filters increases errors when using a diagonal matrix transform, for color correction and reduces color distinction. Spectral sharpening is a transformation of colors that was introduced to reduce color‐constancy errors when the colors are collected through spectrally overlapping filters. The earlier color‐constancy methods improved color precision when the illuminant color is changed, but they overlooked the color distinction. In this article, we introduce a new spectral sharpening technique that has a good compromise of color precision and distinction, based on real physical constraints. The spectral overlap is measured through observing a gray reference chart with a set of real and spectrally disjoint filters selected by the user. The new sharpening method enables to sharpen colors obtained by a sensor without knowing the camera response functions. Experiments with real images showed that the colors sharpened by the new method have good levels of color precision and distinction as well. The color‐constancy performance is compared with the data‐based sharpening method in terms of both precision and distinction. © 2014 Wiley Periodicals, Inc. Col Res Appl, 40, 564–576, 2015     

机载电扫雷达单脉冲动目标检测工程分析

针对机载电扫单脉冲雷达,探讨一种自适应偏置相位天线（ADPCA）优化权值计算思路的可行性,并详细推导文献[2]中两种频域ADPCA方法引入波束锐化思想提高性能的机理和区别。其次讨论补偿空间相移、主杂波跟踪及天线子阵间距设计对时频域ADCPA性能的影响。最后给出了两种可行方案的计算耗时比较。     

大型卷板机工件的视觉曲率半径测量

为准确快速的在线测量大型卷板机工件的曲率半径,利用相机拍摄投影在卷板机工件上的激光条纹,然后采用结合梯度锐化和重心法的中心提取算法对拍摄的激光条纹进行高精度的条纹中心提取,并从三维点数据拟合出曲线的半径,为卷板机的成形工艺提供实时的数据依据。     

Two‐fluid model with interface sharpening

Two‐fluid models are applicable for simulations of all types of two‐phase flows ranging from separated flows with large characteristic interfacial length scales to highly dispersed flows with very small characteristic interfacial length scales. The main drawback of the two‐fluid model, when used for simulations of stratified flows, is the numerical diffusion of the interface. Stratified flows can be easily and more accurately solved with interface tracking methods; however, these methods are limited to the flows, that do not develop into dispersed types of flows. The present paper describes a new approach, where the advantage of the two‐fluid model is combined with the conservative level set method for interface tracking. The advection step of the volume fraction transport equation is followed by the interface sharpening, which preserves the thickness of the interface during the simulation. The proposed two‐fluid model with interface sharpening was found to be more accurate than the existing two‐fluid models. The mixed flow with both: stratified and dispersed flow, is simulated with the coupled model in this paper. In the coupled model, the dispersed two‐fluid model and two‐fluid model with interface sharpening are used locally, depending on the parameter which recognizes the flow regime. Copyright © 2010 John Wiley & Sons, Ltd.