Migration and natural fate of a coal tar creosote plume: 1. Overview and plume development

A volume of sand containing coal tar creosote was emplaced below the water table at CFB Borden to investigate natural attenuation processes for complex biodegradable mixtures. Coal tar creosote is a mixture of more than 200 polycyclic aromatic hydrocarbons, heterocyclic compounds and phenolic compounds. A representative group of seven compounds was selected for detailed study: phenol, m-xylene, naphthalene, phenanthrene, 1-methylnaphthalene, dibenzofuran and carbazole. Movement of groundwater through the source led to the development of a dissolved organic plume, which was studied over a 4-year period. Qualitative plume observations and mass balance calculations indicated two key conclusions: (1) compounds from the same source can display distinctly different patterns of plume development and (2) mass transformation was a major influence on plume behaviour for all observed compounds.     

Measurements of peroxyacyl nitrates (PANS) in Mexico City: implications for megacity air quality impacts on regional scales

Peroxyacyl nitrates (PANs) were measured using gas chromatography with electron capture detection (GC/ECD) in north central Mexico City during February–March of 1997. Peroxyacetyl nitrate (PAN) was observed to exceed 30 ppb during five days of the study, with peroxypropionyl nitrate (PPN) and peroxybutryl nitrate (PBN) reaching 6 and 1 ppb maximum, respectively. Levels of total PANs typically exceeded 10 ppb during the period of measurement and showed a very strong diurnal variation with PANs maximum during the early afternoon and falling to less than 0.1 ppb during the evening hours. These levels of PANs are the highest reported values in North America (and the world) for an urban center, since levels of approximately 30 ppb were reported during the late 1970s in the Los Angeles area (South Coast Air Basin, Tuazon et al., 1978). Hydrocarbon measurements indicate that the levels of olefins, specifically butenes are significant in Mexico City. A time series taken of source indicator hydrocarbons taken before and during a Mexican National Holiday with reduced automobile traffic clearly show that mobile sources of butenes are as important as liquefied petroleum gas. Observations of 10–40 ppb C methyl-t-butyl ether (MTBE) are consistent with MTBE/gasoline fuel usage as a source of isobutene and formaldehyde. Both these reactive species can lead to increased oxidant and PAN formation. The strong diurnal profiles of PANs are consistent with regional clearing of the Mexico City air basin on a daily basis. Estimates are given using a simple box model calculation for a number of key primary and secondary pollutant emissions from this megacity on an annual basis. These calculations indicate that megacities can be important sources of both primary and secondary pollutants, and that PANs produced in megacity environments are likely to contribute strongly to regional scale ozone and aerosol productions during long range transport.     

Polycyclic aromatic hydrocarbons in the bulk precipitation and surface waters of Northern Greece

Bulk (wet and dry) precipitation and surface water sampling was undertaken in the main plain of central Macedonia in Northern Greece. Fourteen polycyclic aromatic hydrocarbons (PAHs) included in the US EPA's priority pollutant list were analysed. The concentrations determined in bulk precipitation were in general within the range of values worldwide reported. Concentrations were highest in the cold months. Deposition fluxes of PAHs were of the same order of magnitude as reported data. The greatest values were found when high concentrations of PAHs in precipitation coincided with large precipitation amounts. The concentrations of PAHs in surface waters (main rivers, tributaries, ditches, etc) were in general lower than those in bulk precipitation, and among the lowest reported for European rivers, excepting Np and Ph. Bulk deposition and domestic effluents are suggested as being the main PAH sources into surface waters.     

The kinetics of reductive dehalogenation of a set of halogenated aliphatic hydrocarbons in anaerobic sediment slurries

Disappearance rate constants are reported for the reductive transformation of 17 halogenated aliphatic hydrocarbons in anaerobic sediment-water samples. Statistical experimental design in combination with multivariate chemical characterization of their chemical properties was used to select the compounds. Degradation followed pseudo first-order kinetics through at least two half-lives for 15 of the 17 compounds. Of all the compounds investigated, 1,2,3-trichloropropane and dichloromethane were unique in that they were dehalogenated according to zero-order kinetics. Reductive dehalogenation was the sole transformation reaction taking place.     

Development of a continuously stirred flow cell for investigating sorption mass transfer

This paper introduces a new reversible-flow design for a continuously stirred reactor used to study sorption mass transfer in soil and solvent systems. The stirred reactor has potential advantages over conventional packed column or batch reactors because it isolates intraparticle sorption rate limitations from advective-dispersive transport, yet allows changes to flux through the reactor for analysis of sorption kinetics under dynamic conditions. Previously, stirred reactors have often failed due to clogging of sediment on the effluent frit. The reverse-flow backwashing design allows longer life and higher confidence in maintaining mixed conditions than previous designs. Mass transfer 'rate coefficients estimated from stirred and column experiments are compared; both techniques produced results consistent with a published correlation. The data also show that fitted sorption mass transfer coefficients can be strongly dependent on the choice of equilibrium partition coefficient (i.e. batch or first-moment derived values), and that the conventional two-site sorption kinetics model fails to accurately predict sorption mass transfer in the presence of changing solvent velocity through the reactor.     

Polycyclic aromatic hydrocarbons: bees, honey and pollen as sentinels for environmental chemical contaminants

Three beehive matrices, sampled in six different apiaries from West France, were analyzed for the presence of four polycyclic aromatic hydrocarbons (PAH4: benzo[a]pyrene, benzo[a]anthracene, benzo[b]fluoranthene and chrysene). Samples were collected during four different periods in both 2008 and 2009. Honey samples showed the lowest levels of PAH4 contamination (min = 0.03 μg kg⁻¹; max = 5.80 μg kg⁻¹; mean = 0.82 μg kg⁻¹; Sd = 1.17). Bee samples exhibited higher levels of PAH4 contamination (min = 0.32 μg kg⁻¹; max = 73.83 μg kg⁻¹; mean = 7.03 μg kg⁻¹; Sd = 17.83) with a great dispersion of the concentrations due to four main events of high concentrations. Pollen samples showed only one major episode with the highest PAH4 concentration found (min = 0.33 μg kg⁻¹; max = 129.41 μg kg⁻¹; mean = 7.10 μg kg⁻¹; Sd = 22.28). The PAH4 concentrations found were significantly influenced by the landscape context for all beehive samples.     

Challenges in assessing the toxic effects of polycyclic aromatic hydrocarbons to marine organisms: a case study on the acute toxicity of pyrene to the European seabass (Dicentrarchus labrax L.)

The acute toxicity (96 h) of pyrene (PY) to European seabass (Dicentrachus labrax) juveniles assessed in a semi-static bioassay (SSB) with medium renewal at each 12 h, and in a static bioassay (SB) without medium renewal was compared in laboratorial conditions (water PY concentrations: 0.07-10 mg L⁻¹). Main findings in the SSB that assessed mainly the toxicity of PY and its metabolites were: increased levels of bile PY metabolites in good agreement with the profile of lipid peroxidation levels (LPO) in exposed fish relating PY exposure and oxidative damage; increased levels of PY-type compounds in the brain indicating their ability to cross the blood-brain barrier; increased levels of these substances in liver and muscle which are edible tissues for humans thus raising concern on potential adverse effects on consumers of fish from PY contaminated areas; a significant inhibition of glutathione S-transferase activity suggesting its involvement in PY detoxication as toxicant scavenger; finally, an almost complete impairment of the swimming velocity at all the PY concentrations linking sub-individual to higher population level effects. In the SB, where the overall toxicity of PY, its metabolites and environmental degradation products was evaluated, 19% and 79% of PY decay in test media was found at 12 and 96 h, respectively. In general, the effects were similar to those of SSB but with significant effects being induced at higher PY concentrations indicating that the parental compound is more toxic than its environmental degradation products. The other main differences relatively to the SSB were: increased levels of PY-type substances in the liver suggesting more accumulation in this organ. Therefore, these findings highlight the need of carefully considering experimental design options when assessing the toxicity of readily degradable substances to marine fish, and stress the importance of taking into consideration the toxicity of environmental degradation products in addition to toxic effects of the parental substance and its metabolites for marine ecological risk assessment.     

Sorption of PAHs and PCBs to activated carbon: coal versus biomass-based quality

The addition of activated carbon (AC) is an increasingly popular method for pollutant immobilization, and the AC material can be made of biomass or coal/fossil feedstock. The aim of the present study was to investigate whether there are differences between pollutant sorption to biomass and coal-based AC in the presence and absence of sediment. Through N₂ and CO₂ adsorption to probe surface area and pore size it was shown that the biomass-based AC had a stronger dominance of narrow pores in the size range 3.5-15 Å than the anthracite-based material. In the absence of sediment, sorption isotherms for the probe compounds pyrene and PCB-101 showed stronger sorption for the biomass-based AC (logarithmic Freundlich coefficients 8.15 for pyrene; 9.91 for PCB-101) than for the anthracite-based one (logarithmic Freundlich coefficients 7.20 and 9.70, respectively). In the presence of sediment, the opposite trend was observed, with the stronger sorption for anthracite-based AC. Thus, the presence of competing and/or pore-blocking sediment constituents reduces sorption to a larger extent for biomass-derived AC (factor of 5 for pyrene to almost 100 for PCB-101) than for anthracite-based AC (no reduction for pyrene to factor of 5 for PCB-101). This difference is tentatively attributed to the difference in pore size distribution, narrow pores being more prone to clogging, and could have implications for remediation feasibility with AC from different sources.     

Desorption of polycyclic aromatic hydrocarbons from field-contaminated soil to a two-dimensional hydrophobic surface before and after bioremediation

This study investigated environmental distributions and production mechanisms of chlorinated polycyclic aromatic hydrocarbons (Cl-PAHs) in the sediments from some tidal flats located in Asia. Cl-PAHs were found in sediments taken from Arao tidal flat, Kikuchigawa River and Shirakawa River. The range of ∑Cl-PAHs was from 25.5 to 483 pg g⁻¹ for Kikuchigawa River and Arao tidal flat, respectively.Concentrations of PAHs and Cl-PAHs showed no significant correlations (r = 0.134). This result suggests that the origins of these compounds differ. In the identified Cl-PAH isomers, the most abundant Cl-PAH isomer was 9,10-dichloroanthracene (9,10-di-Cl-ANT) in the three sites. In general, concentrations of Cl-ANTs in the coastal environment are about 3-5 orders of magnitude lower than those of anthracene (ANT). However, concentration ratios between Cl-ANTs and ANT (Cl-ANTs/ANT) in the sediments ranged from 4.1% to 24.6%. This result indicated that Cl-PAHs were not generated under industrial processes but the high concentration ratios have resulted from the contribution of photochemical production of Cl-ANTs in the sediments because ANT is known to have high photochemical reactivity.For examining this phenomenon, ANT adsorbed onto glass beads was irradiated with UV under the mimicked field conditions of tidal flats. As a result, it was noticed that, while chlorinated derivatives were negligible in a light-controlled group, production of 2-Cl-ANT, 9-Cl-ANT and 9,10-diCl-ANT on the irradiated surface were found in this study. These results suggest that photochemical reaction of PAHs can be a potential source of the occurrence of Cl-PAHs in the coastal environment.