生物组织散射元平均间距估计的一种新方法

生物组织散射元平均间中划描述生物组织微观结构特性和生物组织超微散射特性的重要参数。本文在对生物组织超声背向散射随机模的基础上,提出了基于生物组织超声背向散射信号突变点检测的工用射元平均间距估计的新方法。该方法是生物组织超声散射分析的有效方法。     

New Class of Ni‐Rich Cathode Materials Li[NixCoyB1−x−y]O2 for Next Lithium Batteries

A new class of layered cathodes, Li[Ni_xCo_yB_1?x?y]O₂ (NCB), is synthesized. The proposed NCB cathodes have a unique microstructure in which elongated primary particles are tightly packed into spherical secondary particles. The cathodes also exhibit a strong crystallographic texture in which the a–b layer planes are aligned along the radial direction, facilitating Li migration. The microstructure, which effectively suppresses the formation of microcracks, improves the cycling stability of the NCB cathodes. The NCB cathode with 1.5 mol% B delivers a discharge capacity of 234 mAh g^?1 at 0.1 C and retains 91.2% of its initial capacity after 100 cycles (compared to values of 229 mAh g^?1 at 0.1 C and 78.8% for pristine Li[Ni_0.9Co_0.1]O₂). This study shows the importance of controlling the microstructure to obtain the required cycling stability, especially for Ni‐rich layered cathodes, where the main cause of capacity fading is related to mechanical strain in their charged state.     

黑缘烟蟋螽丝腺结构

【目的】蟋螽是直翅目中唯一具有吐丝筑巢行为的类群。本研究旨在探讨蟋螽丝腺的结构特点。【方法】应用解剖学观察、免疫荧光、苏木精-伊红染色、PAS苏木精染色、扫描电镜和透射电镜等方法从细胞水平对黑缘烟蟋螽Capnogryllacris nigromarginata丝腺的显微与超微结构进行了观察。【结果】黑缘烟蟋螽丝腺由导管和腺泡构成。腺泡由鞘细胞延伸形成的结缔组织鞘包围。腺泡的主体有4种细胞,分别为Ⅰ型分泌细胞、Ⅱ型分泌细胞、围细胞和腔细胞。Ⅰ型和Ⅱ型分泌细胞为大的腺细胞,形状不规则。分泌细胞细胞核很大,胞质内有大量的内质网和分泌颗粒。Ⅰ型分泌细胞靠近腺泡中心,PAS-苏木精染色表明Ⅰ型分泌细胞内含糖蛋白,Ⅱ型分泌细胞在腺泡外周,位于Ⅰ型分泌细胞与围细胞或结缔组织鞘之间。腔细胞分散在分泌细胞之间,包围形成胞外运输分泌物的通道。围细胞与鞘细胞接触,具有由细胞膜内陷形成的微绒毛腔,胞质内有大量的线粒体。围细胞微绒毛腔与腔细胞包围的细胞外运输通道相连,分泌细胞分泌的颗粒聚集在分泌细胞和胞外运输通道之间的连接处,并将分泌物排出至胞外运输通道。多个腺泡的胞外运输通道汇集到由单层细胞组成的丝腺导管。单层导管细胞靠近管腔外围具有规则排列的质膜内陷和大量伸长的线粒体;靠近管腔的一侧具连续的细胞膜突起,在导管壁的表皮下紧密排列。【结论】黑缘烟蟋螽丝腺分泌细胞分为Ⅰ型分泌细胞和Ⅱ型分泌细胞。分泌物质产生及分泌过程依次经过分泌细胞、腔细胞包围的胞外通道、分支导管、总导管和唾窦。其中在腺泡细胞之间,分泌物向外运输过程中,围细胞微绒毛腔的微丝束可能对分泌物的外排提供推动力。     

Halocnemum M. Bieb. vegetation in the Mediterranean Basin

The aim of the article is the syntaxonomic interpretation of hyperhalophilous woody or semi-woody vegetation with Halocnemum M. Bieb. along the coasts of the Mediterranean Basin. For this area, the two species of Halocnemum, H. strobilaceum (Pall.) M. Bieb. and H. cruciatum (Forssk.) Tod. are identified; their morphological characteristics, synonymy and distribution are here described. The study carried out of particular aspects of the plant morphology and the micromorphological characteristics of the seeds collected from different places in the Mediterranean allows to better differentiate the two species. Vegetation studies already done in many communities of the Mediterranean by several authors threw into great confusion because only H. strobilacem has been recognized as a dominant species. As regards the syntaxonomic analyses of the vegetation, the authors refer to the proposals already made by various scientists for the vegetation of inland salt basins of Eurasia and the Irano-Anatolian area, who suggested the classes Kalidietea foliate and Halocnemetea strobilaceiirano-anatolica, respectively. Conversely, in the Mediterranean Basin, the vegetation study is present only in coastal areas where it is considerably impoverished in the number of species. Therefore, the authors propose to include hyperhalophilous, woody and fruticose vegetation in the class Sarcocornietea fruticosae. However, the phytosociological and ecological diversity is highlighted proposing the order Halocnemetalia cruciati in which both the alliance Halocnemion strobilacei, for middle Eastern Europe, and the alliance Halocnemion cruciati, for North Africa with penetrations in the Western and Eastern Europe up to the Middle East coast, are included. This new interpretation has required the correction of the names of two associations (Frankenio corymbosae–Halocnemetum cruciati and Zygophylloalbi–Halocnemetumcruciati) and the proposal of two new associations Arthrocnemo machrostachyi–Halocnemetum cruciati and Halocnemo cruciati–Sarcocornietum fruticosae. A further proposal concerns the addition of the alliance Limoniastrion monopetali, previously included in the order Limonietalia, in the order Halocnemetalia cruciati.     

Unique differentiation of radial enamel in Arsinoitherium (Embrithopoda,Tethytheria)

The enamel microstructure in molars of Arsinoitherium is reinvestigated and a new modification of radial enamel (RE), ‘arsinoitheriid radial enamel (ARE)’, is defined. It is characterised by alternating stripes with different organisation of the interprismatic matrix but no prism decussation. Recognition of this new subtype leads to a reinterpretation of structure previously identified as modified radial enamel and of Hunter–Schreger bands in Arsinoitherium. The newly differentiated ARE of Arsinoitherium is more derived in relation to corresponding microstructures of Palaeoamasia and Crivadiatherium. A careful reinvestigation of RE in other Paenungulata will be required to provide additional data bearing on phylogenetic reconstruction. The enamel of Phenacolophus argues against inclusion of this genus in the Embrithopoda.     

Arch and beam: deployment of microstructural fabrics in relation to loads exerted on the shells of bivalved molluscs in different functional regimes

Two apparently contradictory models have been proposed, relating the disposition of microstructural fabrics of the bivalve shell to stresses they experience. These models are here shown to apply to the function of the shell in different circumstances. In its day-to-day operation, the shell acts as a pair of beams, loaded under opposing stresses exerted by the adductor muscles and the ligament. The resulting strain is built into the shell as new layers are added to its growing interior surface (Wainwright 1969). The distribution of stresses induced by attempts to crush the shell, or by violent adduction intended to prevent it from being opened, is different. Here, the shell acts as a dome, a ‘shell’ in the architect's sense. Compressional stress develops in the outer layer and tension in the inner layer. The distribution of shell microstructures in many bivalves is biomechanically consistent with the need to resist these latter stresses. The shell is prestressed in the right direction to resist this deformation. However, the built-in strain is an exaptation in relation to this function. Any added resistance to crushing it provides is fortuitously advantageous, since it becomes prestressed as an unavoidable consequence of shell growth and articulation.     

Development of silver-containing austenite antibacterial stainless steels for biomedical applications Part I: microstructure characteristics,mechanical properties and antibacterial mechanisms

The as-quenched (AQ) microstructure of the Ag-containing alloys was found to be essentially a mixture of austenite (γ) and Ag phases. The Ag phase precipitates had a face-centered-cubic structure and lattice parameter a = 4.09 Å. When the alloy contained Ag ≥0.2 wt%, the mechanical properties were slightly enhanced because of the precipitate strengthening by the Ag phase precipitates. Moreover, the Ag-containing alloys exhibited ductile fracture after tensile testing. The results of an antibacterial test revealed that the Ag phase precipitates play a key role in the antibacterial mechanism of Ag-containing alloys: Ag⁺ ions released from the Ag phase precipitates can kill bacteria. It is suggested that as AISI 316L alloy has an Ag content ≥0.2 wt%, it will have excellent antibacterial properties against both Staphylococcus aureus and Escherichia coli, with an antibacterial rate of nearly 100%.     

Spinning of hydroalcoholic chitosan solutions

We investigated the spinning of hydroalcoholic chitosan solutions. The dope composition was optimized in order to obtain a continuous alcogel fiber by water evaporation on heating the extruded hydroalcoholic solution. This alcogel fiber was then neutralized in aqueous alkali baths and washed in water to eliminate the residual alcohol and salts before final drying. Depending on the alcohol content in the filament at the neutralization step, on specific alcohol–chitosan interactions and on the nature and concentration of the coagulation base, the process yielded semicrystalline chitosan fibers with different proportions of anhydrous and hydrated allomorphs. Contrarily to the classical annealing method, the formation of mainly anhydrous crystals was obtained without significant molecular weight decrease by neutralizing the polymer in hydrophobic conditions. The control of allomorph content was shown to be related to the hydrophobicity of the solvent (alcohol fraction) at the neutralization step.     

Microstructural morphology in early dermal denticles of hammerhead sharks (Elasmobranchii: Sphyrnidae) and related taxa

Mello, W.C., de Carvalho, J.J., Brito, P.M.M. 2011. Microstructural morphology in early dermal denticles of hammerhead sharks (Elasmobranchii: Sphyrnidae) and related taxa. —Acta Zoologica (Stockholm) 00 : 1–7. This study uses scanning electron microscopies to investigate and describe the microstructural diversity of dermal denticles in the family Sphyrnidae, which comprises all living hammerhead shark species, comparing them to other related taxa (i.e. Carcharhinus dussumieri, Carcharhinus plumbeus, Carcharhinus acronotus, Rhizoprionodon acutus, Negaprion brevirostris and Hemigaleus microstoma). The results reveal that sphyrnids present noticeable microstructures in the dermal denticles, distinguishing them from the other related species investigated. Additionally, scale patterns are the same in three distinct body regions (i.e. cephalic, branchial and dorsal fin). Species of Sphyrnidae that reach bigger total lengths and that are widely distributed (i.e. Sphyrna lewini and Sphyrna mokarran) presented more, smaller and nearly hexagonal microstructures that do not cover the entire scale surface, unlike species reaching smaller sizes and restricted to coastal habits (i.e. Sphyrna tiburo, Sphyrna tudes, Sphyrna media and Eusphyra blochii). The sphyrnid scales are similar to R. acutus and C. dussumieri rather than to the other species, but it is not possible to identify the sphyrnid species only by scale features. It is clear that a similar morphology of scales is not necessarily related to similar life habits, and that they are candidates to provide new characters in phylogenetical studies among sphyrnids.     

蕤核的花粉形态及叶片微观结构

运用光学显微镜和扫描电镜对蕤核的花粉形态及叶片微观结构进行了观察。结果表明:蕤核花粉体积小,近球形,辐射对称,具三沟,外壁具条纹状纹饰。上下表皮均有角质层,但形态不同。下表皮有气孔分布,气孔略下陷,气孔密度每平方毫米200～300个,气孔存在三种状态。叶片为异面叶,栅栏组织细胞由2～3层柱状细胞构成,排列紧密,海绵组织由管状细胞构成,细胞间隙大。蕤核虽属于中生植物,但叶片微观结构趋近于旱生植物的特征。