基于时相变化的晴空条件下Himawari-8 AHI火点检测

Himawari-8静止气象卫星具有高空间分辨率、高观测频次和高时效特点,对于火点检测具有很强优势。对Himawari-8卫星的3.9μm和11.2μm两通道亮温进行了连续时相变化研究,得出两通道的亮温在时间上的变化差值稳定且规律明显。根据两通道的亮温时相特征,考虑白天可见光对3.9μm通道的影响,并结合火点产生时引起的亮温变化特征,提出了适用于晴空条件下改进的火点检测算法。在多处进行了此算法的实验,例如2018-11-27 T 16:40(UTC时)河北张家口市桥东区一化工厂附近发生的严重爆炸起火事件以及2019-02-28澳大利亚西南部发生的火灾事件,均快速有效的检测到了火点。实验表明,改进的火点检测算法能很好的进行火点检测,并能解决晨昏交界、冰雪下垫面、常规火源点、太阳耀光等火点检测的难题。     

西准噶尔红山地区晚古生代赞岐岩锆石U Pb年代学、地球化学特征及其地质意义

中亚造山带西部西准噶尔地区红山花岗岩体内部发育多期似岩墙状安山质暗色条带,LA-ICP-MS锆石U-Pb同位素定年和岩石化学与同位素分析表明,它们具有不同的形成年龄、相同的源区和相似的形成过程。其中,具有不规则状或环状形态的暗色条带,其锆石U-Pb年龄为319.1±2.9 Ma和313.3±2.4 Ma,远大于红山岩体花岗岩锆石结晶年龄(305～301Ma),可能是红山岩体侵位过程中所捕掳的围岩;具有线性展布特征的安山质暗色条带,其锆石U-Pb年龄为295±2Ma,形成于红山岩体侵位之后,构成伸展岩墙群。红山岩体中的安山质暗色条带和线状岩墙群具有相似的岩石化学组成,富SiO_2(56.48%～63.09%)、MgO(3.56%～6.31%),具有高的Mg#值(51.74～62.40)及Na_2O/K_2O值(1.34～3.43);球粒陨石标准化稀土元素(REE)配分模式呈明显的右倾型,富集轻稀土元素(LREE)和大离子亲石元素(LILE)Rb、K、Ba、U、Sr,亏损高场强元素(HFSE)Th、Nb、Ce、P和重稀土元素,具较弱的负铕异常;其同位素组成特征为(~(87 )Sr/~(86 )Sr)i=0.703295～0.703620,(~(143) Nd/~(144) Nd)i=0.512612～0.512618,εNd(t)=6.91～7.62,(~(206) Pb/~(204) Pb)t为17.6883～17.9876,(~(207) Pb/~(204) Pb)t为15.5313～15.5686,(~(208)Pb/~(204)Pb)t为37.4460～38.0581。它们具有与赞岐岩类似的地球化学特征,总体表现出与弧岩浆作用相关的地球化学特征,可能具有共同的物质来源,为准噶尔洋板片俯冲消减后同一地幔源区在不同阶段的产物。其中,形成于弧岩浆作用时期的赞岐岩(319～313 Ma),构成与岛弧花岗岩类伴生的环状似岩墙状安山质暗色条带;形成于后造山伸展岩浆作用晚期的赞岐岩(～295Ma),构成与达拉布特左行走滑作用相关的陆内伸展岩墙群。安山质暗色条带(岛弧火山作用)、红山岩体(后造山伸展)和线状岩墙群(陆内伸展)记录了西准噶尔红山地区洋陆转换的全过程。     

A Revisited Purification of Li for ‘Na Breakthrough’ and its Isotopic Determination by MC‐ICP‐MS

The accurate and precise determination of Li isotopic composition by MC‐ICP‐MS suffers from the poor performance of traditional column chromatography. Previously established chromatographic processes cannot completely remove Na in complex geological samples, which is currently interpreted to be a result of Na breakthrough. In this study, Na breakthrough during single‐column purification was found to differ between simply artificial Na‐containing sample solutions, where a little Na residue was found, and silicate rocks, where a large amount of breakthrough occurred. A revised two‐step column purification for Li using 0.5 and 0.3 mol l^?1 HCl as eluents was designed to remove the Na. This modified method achieves high‐efficiency Li purification from Na and consequently avoiding high Na/Li ratio interference for subsequent MC‐ICP‐MS analyses. The proposed method was validated by the analysis of a series of reference materials, including Li₂CO₃ (IRMM‐016, ‐0.10‰), basalt (BCR‐2: 2.68‰; BHVO‐2: 4.39‰), andesite (AGV‐2: 6.46‰; RGM‐2: 2.59‰), granodiorite (GSP‐2: ?0.87‰) and seawater (CASS‐5, 30.88‰). This work reports early Na appearance prior to the elution curves in chromatography and emphasises its influence for subsequent Li isotope measurement. Based on the findings, the established two‐step method would be more secure than single‐column chemistry for Li purification.     

The δ60/58Ni Values of Twenty‐Six Selected Geological Reference Materials

The high‐precision δ^60/58Ni values of twenty‐six geological reference materials, including igneous rocks, sedimentary rocks, stream sediments, soils and plants are reported. The δ^60/58Ni values of all samples were determined by double‐spike MC‐ICP‐MS (Nu Plasma III). Isotope standard solution (NIST SRM 986) and geological reference materials (BHVO‐2, BCR‐2, JP‐1, PCC‐1, etc.) were used to evaluate the measurement bias and intermediate precision over a period of six months. Our results show that the intermediate precision of Ni isotope determination was 0.05‰ (2s, n = 69) for spiked NIST SRM 986 and typically 0.06‰ for actual samples, and the δ^60/58Ni _{NIST SRM 986} values were in excellent agreement with previous studies. Eighteen high‐precision Ni isotope ratios of geological reference materials are first reported here, and their δ^60/58Ni values varied from ?0.27‰ to 0.52‰, with a mean of 0.13 ± 0.34‰ (2s, n = 18). Additionally, SGR‐1b (0.56 ± 0.04‰, 2s), GSS‐1 (?0.27 ± 0.06‰, 2s), GSS‐7 (?0.11 ± 0.01‰, 2s), GSD‐10 (0.46 ± 0.06‰, 2s) and GSB‐12 (0.52 ± 0.06‰, 2s) could potentially serve as candidate reference materials for Ni isotope fractionation and comparison of Ni isotopic compositions among different laboratories.     

Chemical Procedures for Rhenium Extraction from Geological Samples: Optimising the Anion Resin Bead Clean‐up Step

Rhenium–osmium geochronometry for samples with low Re and complex matrices requires improved Re extraction methods. Here, we investigate plausible controls on efficiency and efficacy of Re extraction during our anion resin bead purification. Four different protocols are compared, each isolating a single variable to test. Rhenium concentrations for solutions at each step of each protocol document differences in chemical recovery/yield. The negative‐thermal ionisation mass spectrometry (N‐TIMS) signal intensity serves as a proxy for Re yield and purity. These data document correlations between the N‐TIMS signal intensity and (a) the duration of anion resin bead conditioning prior to loading with Re‐bearing solution, and (b) both duration and strength of nitric acid used during rinsing of the Re‐loaded anion resin bead. The optimal protocol improved Re signal intensity around fourteen times compared with our current Re extraction protocol, an aggregate of 2.4 times improvement in chemical recovery (yield) and 5.8 times improvement in emission efficiency (purity). Repeated N‐TIMS isotopic measurements on our in‐house Re standard solution (1407) verify that our optimal protocol‐3 does not fractionate Re isotopes. The improved anion resin bead method considerably lowers the Re detection limit and allows Re‐Os isotopic analysis of picogram‐level Re hosted in geological samples with complex matrices.     

Barium Isotopic Compositions in Thirty‐Four Geological Reference Materials Analysed by MC‐ICP‐MS

Measurement of Ba isotope ratios of widely available reference materials is required for interlaboratory comparison of data. Here, we present new Ba isotope data for thirty‐four geological reference materials, including silicates, carbonates, river/marine sediments and soils. These reference materials (RMs) cover a wide range of compositions, with Ba mass fractions ranging from 6.4 to 1900 µg g^?1, SiO₂ from 0.62% to 90.36% m/m and MgO from 0.08% to 41.03% m/m. Accuracy and precision of our data were assessed by the analyses of duplicate samples and USGS rock RMs. Barium isotopic compositions for all RMs were in agreement with each other within uncertainty. The variation of δ^138/134Ba in these RMs was up to 0.7‰. The shale reference sample, affected by a high degree of chemical weathering, had the highest δ^138/134Ba (0.37 ± 0.03‰), while the stream sediment obtained from a tributary draining carbonate rocks was characterised by the lowest δ^138/134Ba (?0.30 ± 0.05‰). Geochemical RMs play a fundamental role in the high‐precision and accurate determination of Ba isotopic compositions for natural samples with similar matrices. Analyses of these RMs could provide universal comparability for Ba isotope data and enable assessment of accuracy for interlaboratory data.     

Development and Re‐Evaluation of Tourmaline Reference Materials for In Situ Measurement of Boron δ Values by Secondary Ion Mass Spectrometry

Six tourmaline samples were investigated as potential reference materials (RMs) for boron isotope measurement by secondary ion mass spectrometry (SIMS). The tourmaline samples are chemically homogeneous and cover a compositional range of tourmaline supergroup minerals (primarily Fe, Mg and Li end‐members). Additionally, they have homogeneous boron delta values with intermediate precision values during SIMS analyses of less than 0.6‰ (2s). These samples were compared with four established tourmaline RMs, that is, schorl IAEA‐B‐4 and three Harvard tourmalines (schorl HS#112566, dravite HS#108796 and elbaite HS#98144). They were re‐evaluated for their major element and boron delta values using the same measurement procedure as the new tourmaline samples investigated. A discrepancy of about 1.5‰ in δ¹¹B was found between the previously published reference values for established RMs and the values determined in this study. Significant instrumental mass fractionation (IMF) of up to 8‰ in δ¹¹B was observed for schorl–dravite–elbaite solid solutions during SIMS analysis. Using the new reference values determined in this study, the IMF of the ten tourmaline samples can be modelled by a linear combination of the chemical parameters FeO + MnO, SiO₂ and F. The new tourmaline RMs, together with the four established RMs, extend the boron isotope analysis of tourmaline towards the Mg‐ and Al‐rich compositional range. Consequently, the in situ boron isotope ratio of many natural tourmalines can now be determined with an uncertainty of less than 0.8‰ (2s).     

基于MS60的BIM放样与施工结果精度分析

随着各种异形建筑的不断出现，传统施工放样方法及检测技术已不能完全满足施工要求，因此需要引进新的施工放样及检测技术。本文结合重庆仙桃数据谷金融大楼项目，运用MS60的BIM放样与三维激光扫描技术，探究其在异形建筑施工放样及结果检测中的高效性、可靠性。在施工放样过程中，首先通过在BIM模型上选取放样点，利用MS60全站扫描仪自动搜索与追踪，简化施工放样流程；然后运用BIM模型与点云数据相结合的表面偏差分析对施工结果进行高精度分析，从而为后续施工提供参考。     

大弹涂鱼(Boleophthalmus pectinirostris) Gal-8L基因序列及其细菌凝集活性的鉴定

半乳糖凝集素-8基因(galectin-8,Gal-8)属于凝集素家族一员。已知Gal-8在哺乳动物的先天免疫中发挥重要作用,然而在鱼类中却鲜有报道。本研究通过转录组测序获得大弹涂鱼(Boleophthalmus pectinirostris)半乳糖凝集素-8样基因(galectin-8 like,Bp Gal-8L)c DNA序列。首先确定其序列特征,其次采用实时定量PCR(real-time quantitative PCR,q PCR)的方法鉴定Bp Gal-8L组织表达分布及其与迟缓爱德华氏菌(Edwardsiella tarda)感染相关性;最后分别通过原核表达获得N端和C端CRD区重组蛋白Bp Gal-8L-N和Bp Gal-8L-C,并采用玻片法观察这两个CRD区的细菌凝集活性和糖类结合特性。多重序列比对显示,Bp Gal-8L蛋白含有两个糖识别结构域(carbohydrate recognition domain,CRD),但只有C端的CRD区存在Gal家族典型的β-半乳糖苷糖类结合基序。系统进化树表明Bp Gal-8L属于鱼类Gal-8的一种亚型。q PCR结果显示,Bp Gal-8L基因m RNA在各组织中普遍表达,并且在迟缓爱德华氏菌感染后大弹涂鱼肝和脾中表达量呈上调趋势。细菌凝集实验结果显示,只有Bp Gal-8L-C重组蛋白对检测的5种革兰氏阴性菌及2种革兰氏阳性菌有凝集作用,并与乳糖和脂多糖特异性结合。综上所述,Bp Gal-8L与大弹涂鱼抗菌免疫密切相关,且其N端和C端CRD区发挥不同作用。