多级孔板提高井筒气体携液能力实验研究

气井生产时，井底积液会影响气井产量，甚至导致气井停产。加入泡沫剂、更换小直径油管或氮气举升等措施排出井底积液是保证气井生产的重要手段，但造成液体回流的井筒结构并没有变化。改变适合于单相流体的均一井筒结构，降低气液两相流中液体在井筒的回流，提高气体携液能力，形成适用于气液两相流的井筒结构，可以改善气井生产。实验设计了安装于管筒内的类似于倒置漏斗形的多级孔板装置，以井底气体为动能，借助“爬楼梯”原理，利用孔板减少或阻止液体回流，使液体通过多级孔板逐级上升；实验利用气体压缩机提供气源，测试了不同气体流速下，加入孔板对于气体和泡沫携液能力的影响。实验表明，在管筒内加入液体回流限制装置，大幅度地提高了管筒的气体携液能力和排液效果，减少了管筒液体回流量，降低了气体排液和泡沫排液的气体流速临界值。多级孔板可用于气井增产，能够提高气体携液能力，提高泡沫携液效果，降低泡沫剂的使用量和井底残液，但在实际生产中气体流量和装置的匹配性，还有待于在现场试验中进一步验证和优化。     

佛山市基本农田保护区养殖鱼塘水质抽样调查与评价

对佛山市5区的基本农田保护区养殖鱼塘水质抽样调查,并采用环境污染指数对水质状况进行评价。结果表明,养殖鱼塘水温和p H值均能达到鱼类正常生长要求,溶解氧较丰富,但水质普遍过肥。在5区20个调查点中,CODCr、NH4+-N和TP超标率分别为90%、30%、85%。5区养殖鱼塘水质的污染程度由高到低依次为禅城区、南海区、三水区、顺德区、高明区。全市养殖鱼塘的综合质量指数为1.44,水质整体上受到重度污染。TP的污染负荷分担率最高,其次是CODCr和NH4+-N。总体来说,佛山市基本农田保护区养殖鱼塘水体有机物污染十分突出,已出现富营养化。     

天津医科大学图书馆中文专业图书资源利用效率统计分析

以天津医科大学图书馆UNICORN集成管理系统的各项记录为数据源,挖掘整合了2004—2013年中文专业图书有关数据,从综合性、动态性角度,统计分析了图书购置数量、图书借阅数量及购书经费分布等有关数据,旨在为提高图书馆管理水平提供参考依据。     

Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

丙酸盐对厌氧氨氧化除氮性能及群落结构的影响

为了探究有机碳对厌氧氨氧化的长期影响, 向厌氧氨氧化膜生物反应器中添加不同浓度的丙酸钠, 研究对反应器的除氮效能以及微生物的种群结构和功能变化。结果表明: 反应器主要的脱氮过程由CandidatusBrocadia完成, 当丙酸钠浓度为100 mg/L时, 反应器中由于异养细菌的生长, 可实现碳氮的同步去除, 平均总氮去除率可达91.9%。当丙酸钠浓度为200 mg/L 时, 对Candidatus Brocadia的抑制作用导致反应器除氮性能下降, Candidatus Brocadia的丰度降至41.2%, 总氮去除率降至 78.8%。在有机碳抑制作用解除后, 反应器的除氮性能恢复为86.8%, Candidatus Brocadia丰度增加到54.0%, 但群落多样性下降, 属水平的微生物组成有较大的改变。     

齐次核的Hilbert型多重级数不等式取最佳常数因子的等价条件及应用

利用实分析技巧和权函数方法, 讨论具有齐次核的多重级数Hilbert型不等式, 得到了其取最佳常数因子的充分必要条件, 并给出其应用.     

Methods for backcasting,nowcasting and forecasting using factor‐MIDAS: With an application to Korean GDP

We utilize mixed‐frequency factor‐MIDAS models for the purpose of carrying out backcasting, nowcasting, and forecasting experiments using real‐time data. We also introduce a new real‐time Korean GDP dataset, which is the focus of our experiments. The methodology that we utilize involves first estimating common latent factors (i.e., diffusion indices) from 190 monthly macroeconomic and financial series using various estimation strategies. These factors are then included, along with standard variables measured at multiple different frequencies, in various factor‐MIDAS prediction models. Our key empirical findings as follows. (i) When using real‐time data, factor‐MIDAS prediction models outperform various linear benchmark models. Interestingly, the “MSFE‐best” MIDAS models contain no autoregressive (AR) lag terms when backcasting and nowcasting. AR terms only begin to play a role in “true” forecasting contexts. (ii) Models that utilize only one or two factors are “MSFE‐best” at all forecasting horizons, but not at any backcasting and nowcasting horizons. In these latter contexts, much more heavily parametrized models with many factors are preferred. (iii) Real‐time data are crucial for forecasting Korean gross domestic product, and the use of “first available” versus “most recent” data “strongly” affects model selection and performance. (iv) Recursively estimated models are almost always “MSFE‐best,” and models estimated using autoregressive interpolation dominate those estimated using other interpolation methods. (v) Factors estimated using recursive principal component estimation methods have more predictive content than those estimated using a variety of other (more sophisticated) approaches. This result is particularly prevalent for our “MSFE‐best” factor‐MIDAS models, across virtually all forecast horizons, estimation schemes, and data vintages that are analyzed.     

考虑单元互测的测试性指标分配方法

测试性分配是将系统级测试性指标按照一定规则分配给各组成单元的过程。针对现有主流测试性分配方法未考虑单元之间的互测情形,导致分配结果不合理,尤其是部分单元分配指标虚高,难以实现或代价过高等问题,提出了在综合考虑单元故障率、故障危害度等多重影响因素基础上,进一步考虑单元互测因素的测试性指标分配方法。首先实施考虑多重影响因素的指标初次分配;然后基于单元测试性初步设计结果,实施测试性建模与分析,得到单元自检故障率与他检故障率;再利用这两个数据以及初次分配结果构造分配函数实施再次分配,进而得到最终的分配结果;最后应用该方法进行仿真和实例运算,证明了该方法的有效性和先进性。     

户用光伏交流冰箱系统的性能研究

针对昆明地区户用光伏交流冰箱系统的工作特性进行了实验研究,在不同天气条件下对所构建的系统性能进行了测试,测试结果表明,该系统冰箱的冷冻室最低温度可达-22℃,冷藏室温度为0~7℃,在晴天和多云天气情况下,系统带3kg水时制冷系数COP分别为0.08、0.05,系统带8kg负载时制冷系数COP分别为0.28、0.23;在阴雨天气情况下,蓄电池单独向系统供电可保证系统连续工作3d.该光伏冰箱系统在昆明地区运行稳定,并为户用光伏交流冰箱系统性能的进一步优化提供了依据.     

页岩气低伤害超临界CO2凝胶压裂液研究

针对常规水压裂液会对页岩造成伤害，容易产生水锁，不易返排，还造成水资源消耗和污染环境等问题，制备了低伤害二氧化碳凝胶压裂液。将自备的F2EU和F4EU增稠剂加入到超临界CO₂基液中，探究两种增稠剂的加入量对CO₂凝胶压裂液黏度的影响，综合考虑成本与效果，优选了2%的F4EU增稠剂，可将CO₂的黏度增至15.4 mPa·s。研究了温度、压力以及剪切速率对凝胶压裂液黏度的影响。实验结果表明，随着温度升高黏度总体降低，但中间出现一个短暂升高阶段；随着压力上升压裂液黏度增加；随着剪切速率的增加压裂液黏度下降，属于一种典型的剪切变稀的假塑性流体。F4EU超临界CO₂凝胶压裂液的平均伤害率为1.39%，远远小于常规压裂液对岩芯的伤害率。实验表明，F4EU超临界CO₂凝胶压裂液在页岩气压裂开采中具有良好的应用前景。