CCD型束流截面探测器

CCD型束流截面探测器的主要特点是使用电荷耦合器件做传感器,用束流同步光中的可见光成份做为信号源。该探测器同时具有模拟量和数字量两种输出,工作周期短,速度高,不影响束团粒子寿命,在电子储存环物理运行中,是一种有效的探测设备。     

Fast microwave detection system for coherent synchrotron radiation study at KEK: Accelerator test facility

A fast room temperature microwave detection system based on the Schottky Barrier-diode detector was created at the KEK ATF (Accelerator Test Facility). It was tested using Coherent Synchrotron Radiation (CSR) generated by the 1.28 GeV electron beam in the damping ring. The speed performance of the detection system was checked by observing the CSR from a multi-bunch (2.8 ns bunch separation time) beam. The theoretical estimations of CSR power yield from an edge of bending magnet as well as new injection tuning method are presented. A very high sensitivity of CSR power yield to the longitudinal electron distribution in a bunch is discussed.     

Experimental Investigation of FRP-Strengthened RC Beam-Column Joints

The results of a comprehensive experimental program, aimed at providing a fundamental understanding of the behavior of shear-critical exterior reinforced concrete (RC) joints strengthened with fiber reinforced polymers (FRP) under simulated seismic load, are presented in this study. The role of various parameters on the effectiveness of FRP is examined through 2/3-scale testing of 18 exterior RC joints. Conclusions are drawn on the basis of certain load versus imposed displacement response characteristics, comprising the strength (maximum lateral load), the stiffness, and the cumulative energy dissipation capacity. The results demonstrate the important role of mechanical anchorages in limiting premature debonding, and they provide important information on the role of various parameters, including: area fraction of FRP; distribution of FRP between the beam and the column; column axial load; internal joint (steel) reinforcement; initial damage; carbon versus glass fibers; sheets versus strips; and effect of transverse beams.     

Mixed formulation of nonlinear beam on foundation elements

This paper presents an inelastic element for the analysis of beams on foundations. The element is derived from a two-field mixed formulation with independent approximation of forces and displacements. The state determination algorithm for the implementation of the element in a general purpose nonlinear finite element analysis program is presented and its stability characteristics are discussed. Numerical studies are performed to compare the model with the classical displacement formulation. The studies confirm the superiority of the proposed model in describing the inelastic behavior of beams on foundations.     

固定频率波束可调的多端口微带漏波天线

提出了一种崭新结构的多端口馈电微带漏波天线 ,实现了频率固定下的电控天线主波束逐级可调。在工作频率固定的情况下 ,通过控制双端口馈电微带天线上的中部馈电端口位置 ,使微带漏波天线主波束方向发生偏移。仿真结果表明 ,当工作频率固定为 7GHz的情况下 ,在H平面上 ,主波束扫描范围可以达到约 48°～ 88°。     

化学束外延

本文介绍了化学束外延(CBE)的发明和发展,论述了CBE的原理和设备。文中还介绍了最近提出的一种生长机理。     

电子直线加速器中计入纵向与横向耦合效应的束流包络线方程组

一、引言从束流动力学的观点出发,对于粒子束在直线加速器中的运动,有两种主要的分析方法,也即粒子轨迹跟踪法及考察束流包络运动的方法。前者是通过解单粒子运动方程,跟踪大量的单粒子运动轨迹而后进行分析;后者则是通过解束流的包络线方程,根据束流包络的变化来进     

Radiation transmission through a composite pure water layer of uniform and depth-dependent extinction characteristics

The paper describes the calculation of the beam solar radiation transmission across the uniform salinity upper convecting zone (UCZ) and the salinity stratified gradient zone (GZ), when the extinction coefficient is not only wavelength but also salinity-concentration dependent, assuming that the effect of scattering to be negligible. The results are useful in determining the effects of dissolved salt ions on pure water transmission, at least according to the existing measured data in the literature.     

MBE生长的InSb和InASxSb1—x的载流子浓度剖面分布

在(111)InSb 和(100)GaAs 衬底上,用分子束外延技术生长了 InSb 和 InAs_xSb_(1-x)外延层。用自动电化学 C—V 法测量了外延层的载流子浓度剖面分布。结果表明:(1)外延层呈 P 型;(2)InSb/GaAs 异质外延层的载流子浓度为(1～2)×10~(16)cm~(-3),比相应的同质外延层 InSb/InSb 的(1～2)×10~(17)cm~(-3)小一个数量级;(3)生长层的载流子浓度剖面分布和质量取决于衬底表面的制备。讨论了有关问题。