In Vivo Albumin-Binding of a C-Functionalized Cyclam Platform for 64Cu-PET/CT Imaging in Breast Cancer Model

An improved glucose-chelator-albumin bioconjugate (GluCAB) derivative, GluCAB-2^Mal, has been synthesized and studied for in vivo ⁶⁴Cu-PET/CT imaging in breast cancer mice models together with its first-generation analogue GluCAB-1^Mal. The radioligand works on the principle of tumor targeting through the enhanced permeability and retention (EPR) effect with a supportive role played by glucose metabolism. [⁶⁴Cu]Cu-GluCAB-2^Mal (99 % RCP) exhibited high serum stability with immediate binding to serum proteins. In vivo experiments for comparison between tumor targeting of [⁶⁴Cu]Cu-GluCAB-2^Mal and previous-generation [⁶⁴Cu]Cu-GluCAB-1^Mal encompassed microPET/CT imaging and biodistribution analysis in an allograft E0771 breast cancer mouse model. Tumor uptake of [⁶⁴Cu]Cu-GluCAB-2^Mal was clearly evident with twice as much accumulation as compared to its predecessor and a tumor/muscle ratio of up to 5 after 24 h. Further comparison indicated a decrease in liver accumulation for [⁶⁴Cu]Cu-Glu-CAB-2^Mal.     

PET熔体长距离输送影响因素探讨

介绍了PET熔体长距离输送工艺流程,重点分析易对PET熔体输送带来不利影响的因素,如熔体压力降、停留时间、管道粗糙度、焊缝品质等,并针对熔体输送的不利因素,提出了相应的解决方案,对熔体直纺设计、实践提供必要的参考。     

DCPD和PET合成不饱和聚酯的研究

探讨了用双环戊二烯和聚对苯二甲酸乙二醇酯废料合成不饱和聚酯树脂的方法：PET用二元醇醇解后，加入顺入烯二酸酐和DCPD，在80－120℃条件下滴加与DCPD等量的水进行反应，反应大约2.5h，加入其它成分，升温酯化直至反应完全。PET一定时，DCPD的含量影响不饱和聚酯同苯乙烯的互溶性和固化过程，DCPD和PET合成的不饱和聚酯树脂与标准树脂相比较，机械性能好，空干性好，解决了环境污染，具有很好的经济效益。     

用于PET薄膜回收的螺杆设计

根据PET薄膜的特点和高分子熔融态流动理论，分析了挤出回收用螺杆的各段结构，及螺杆参数选择，设计出大长径比、深槽、双排气、高效专用螺杆。     

PC／PET共混物的非等温结晶动力学

采用等速变温ＤＳＣ法对ＰＣ／ＰＥＴ共混体系的非等温结晶动力学进行了研究，结果表明，从玻璃态结晶时，随着ＰＣ含量的增加，ＰＥＴ组分的结晶速率先增加后降低。耐从熔体结晶时，体系的结晶速率随着ＰＣ含量的增加而增加，讨论了ＰＣ对ＰＥＴ组分结晶过程的影响。     

The PET18 locus of Saccharomyces cerevisiae: a complex locus containing multiple genes

The basis of pleiotropy shown by the pet18 mutants of Saccharomyces cerevisiae (rho-0,KIL-0 and temperature sensitive growth) was examined by cloning the fragment which complements the defect in growth at 37 degrees C of the pet18 mutants. The cloned DNA could complement the defect in the maintenance of the killer plasmid but did not give the cell the ability to maintain mitochondrial DNA. Sequence analysis of the cloned DNA revealed the presence of four open reading frames, at least two of which are necessary for the complementation activity. By using the cloned DNA as a probe, we found that two independent pet18 mutants have a deletion covering the entire sequence contained in the probe. From these results we predict that the traits of the pet18 mutants that concern temperature sensitivity and killer of the pet18 mutants are controlled by a separate gene(s) from that which participates in the maintenance of mitochondrial DNA.     

含两种不同共聚组分改性聚酯的结晶速率

添加己二酸、间苯二甲酸,聚乙二醇对PET进行改性,合成样品。用DSC法研究合成共聚物的等温结晶动力学。结果表明,在所选择的温度范围内,共聚物很好的符合Avrami方程。随温度的升高,共聚物的结晶速度常数K和Avrami指数n逐渐减小,结晶速度G逐渐降低。含2种柔性组分的共聚酯随着一种柔性组分含量的增加,结晶速率G上升;含一种刚性一种柔性组分的共聚酯随刚性组分含量的增加,结晶速率G下降。     

有色高收缩涤纶毛条的研制

就生产有色高收缩涤纶毛条的工艺路线进行了比较．从主要纺丝工艺对收缩性的影响优选了物理改性祛的生产工艺，研制了满足精纺要求的有色高收缩涤纶毛条．     

NPCDP／PET复合仿毛纤维纺丝工艺研究

应用复合纺丝方法并通过加弹、空气变形等措施使ＮＰＣＤＰ／ＰＥＴ异染异收缩纤维获得优良的毛性感。简要介绍了复合纺丝的工艺路线，讨论了纺丝温度、压力、干燥工艺、拉伸条件对可纺性的影响，并明确了变形工艺对复合纤维的影响作用。制得的ＮＰＣＤＰ／ＰＥＴ复合纤维物理力学性能符合后加工要求，织物的缓弹回复角达３０５度。     

取向PET薄膜和容器热收缩的热机械分析

用TMA方法研究了双向拉伸PET膜和容器的热收缩特性,讨论了热收缩和分子结构的关系和各种影响因素。实验结果表明,TMA是研究和测试取向聚合物材料热收缩的简便有效方法。