dU/dt引发的MOSFET误导通分析

分析了MOSFET误导通产生的原因,分别从原理和理论推导两个方面作了分析,主要考虑了开关管中寄生参数对开关特性的影响。通过求解误导通发生的条件,得到哪些参数会导致误触发,最后给出了仿真。文中还提出如何避免MOSFET误导通产生,以及改进方法,对减少实际应用中MOSFET破坏性损坏有一定意义。     

Device-physics-based analytical model for SET pulse in sub-100 nm bulk CMOS Process

Through revising the process of charge collection for reversed drain-bulk junction,a bias-dependent SPICE model is proposed which includes the bipolar amplification effect that cannot be ignored in PMOS.The model can capture the plateau effect,and produce current and voltage pulse shapes and widths that are consistent with TCAD simulation.Considering the case of connecting load,it is still valid.For combination and sequential logic circuits,the SET pulsewidths and LET upset threshold from SPICE model are consistent with TCAD simulations.     

A uniplanar printed antenna with an inverted L‐shaped coupling feed for LTE/GSM/DCS/PCS/UMTS operations

A novel uniplanar printed antenna with a total size of 115 × 40 mm² is proposed for mobile device application. By using an inverted L‐shaped feeding mechanism and a meandered shorting strip, a dual‐band operation with wideband characteristic can be achieved. Here, the lower operating band is able to cover the LTE 700 and GSM 850/900 operations, while the higher operating band allows DCS 1800, PCS 1900, UMTS, and LTE 2300 operations. Furthermore, in order to increase the bandwidth of the higher operating band so that LTE 2500 operation can also be covered, an additional parasitic stub is attached to the feed line to excite a resonant frequency at around 2.72 GHz. Parametric studies via simulation are carried out, and prototype of the proposed antenna is also experimentally investigated to validate the simulated results. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Design of the broadband microstrip array antenna for blast furnace surface monitoring

Aiming at the requirements of high-resolution imaging and high integration of the blast furnace radar,this paper presents a method for designing a wideband microstrip array antenna,which broadens the antenna bandwidth through the design of parasitic patches and air layers.By combining multi-input multi-output (MIMO) radar and synthetic aperture radar (SAR) imaging principles,a linear MIMO array is designed,and a near-field simulation imaging experiment is performed on the simulated feed line through the wave number domain imaging algorithm.Simulation results show that the gain of the main lobe of the antenna can reach 14.05 dBi,the reflection coefficient is less than -10 dB,the absolute bandwidth is 5.25 GHz,the operating frequency is 20.67~25.92 GHz,and the range resolution is increased to 3 cm compared with the existing blast furnace radar.The average error of the azimuth direction of the simulated material line imaging is 0.008 m,and the range direction is 0.0011 m.Compared with the traditional microstrip array antenna,this antenna effectively widens the bandwidth,and the range resolution is higher than that of the traditional blast furnace radar.It can accurately obtain the shape information on the simulated material line,and has an engineering application value for blast furnace surface monitoring.     

考虑寄生参数的隔离型双有源桥DC-DC变换器的开关开路故障分析与容错控制策略

双有源桥(DAB)DC-DC变换器开关管的驱动电路故障导致开关开路故障(OCSF),这使得DAB系统拓扑对称性缺失、高频电压和电流发生畸变和直流偏置,进而对系统的可靠性和长期运行稳定性造成不良影响.对此,研究DAB开关管和高频变压器寄生参数对OCSF后系统运行状态的影响,以完善DAB故障分析体系.针对OCSF问题,提出一种基于对称拓扑和对偶原理的故障容错策略,通过闭锁开关使系统运行拓扑恢复对称,并在此基础上提出一种不改变控制器参数、只需改变控制器输出饱和参数的实用控制方法,并在理论上讨论了该方法的可行性.最后,通过实验验证了OCSF模态分析及所提容错控制策略的正确性.     

The haustorium and the chemistry of host recognition in parasitic angiosperms

Two parasitic angiosperms,Agalinis purpurea (Scrophulariaceae) andStriga asiatica (Scrophulariaceae), are compared as to the chemical recognition events involved in host selection.Agalinis is a hemiparasite which can mature to seed-set without a host, whereasStriga is a holoparasite and survives for only a very limited time without a host. Both parasites, however, attach to a host through a specialized organ known as the haustorium and regulate the development of this organ through the recognition of chemical factors from host plants. We now describe the discovery of 2,6-dimethoxy-p-benzoquinone (2,6-DMBQ) as an haustoria-inducing principle fromSorghum root extracts. Our investigation of this compound has led us to suggest that one level of host recognition in these parasitic plants is mediated through their enzymatic digestion of the host root surface. Degradation of surface components liberates quinonoid compounds, such as 2,6-DMBQ, which in turn trigger haustorial development.     

CMOS图像传感器中分段电容DAC非理想因素研究

CMOS图像传感器信号处理中通常采用分段电容DAC产生斜坡参考电压。研究了分段电容DAC精确的电容失配及寄生与其转换精度的关系式。基于对分段电容DAC工作原理的研究,导出了电容失配及寄生模型;针对其分数桥接电容失配、各二进制电容间的失配及寄生电容问题进行了理论分析;对分段电容DAC进行非理想因素仿真,设计了一个采用分段电容DAC的10位单斜ADC并对其进行测试,仿真和测试结果均验证了理论分析的正确性。上述理论分析结果可作为分段电容DAC的设计指导。     

基于PSP的MOSFET射频建模

基于PSP模型提出一种新的RF-MOSFET模型。针对实际器件的物理结构,解析提取了RF条件下MOSFET的寄生参量。最终,将模型应用到某工艺线一共源连接n-MOSFET上,在保证PSP精确拟合直流特性的前提下,在高达40GHz的频率下对S参数的仿真和测试结果进行比较,具有一定的精度。     

基于BP神经网络的平面变压器寄生参数预测

平面变压器的结构与寄生参数具有复杂的非线性关系,难于精确建模计算。基于BP神经网络,以试验数据为基础,建立了平面变压器的结构和寄生参数的映射模型。运用该模型对平面变压器的部分寄生参数进行了预测,预测精度满足工程实际需要。并对平面变压器结构与寄生参数的关系,运用该模型进行了分析,较好地反映出该变压器结构与部分寄生参数之间的非线性关系。预测结果对平面变压器的设计有较大的指导意义。     

包含寄生参数的大功率半导体激光器等效电路模型

对大功率半导体激光器驱动电源仿真研究时,需要建立体现大功率半导体激光器电气特性的等效负载模型,目前的LD(Laser Diode)电路模型由于缺乏寄生参数而不适用.本文根据大功率半导体激光器的测试数据,通过分析改进LD的速率方程,建立了包含寄生参数的大功率半导体激光器等效电路模型.仿真结果表明:该等效电路模型的V-I曲线和P-I曲线与厂家给出的曲线一致,可以作为仿真大功率半导体激光驱动电源的等效负载.