A unified critical state model for geomaterials with an application to tunnelling

This paper is prepared in honour of Professor E.T. Brown for his outstanding contributions to rock mechanics and geotechnical engineering and also for his personal influence on the first author's research career in geomechanics and geotechnical engineering. As a result, we have picked a topic that reflects two key research areas in which Professor E.T. Brown has made seminal contributions over a long and distinguished career. These two areas are concerned with the application of the critical state concept to modelling geomaterials and the analysis of underground excavation or tunnelling in geomaterials.Partially due to Professor Brown's influence, the first author has also been conducting research in these two areas over many years. In particular, this paper aims to describe briefly the development of a unified critical state model for geomaterials together with an application to cavity contraction problems and tunnelling in soils.     

连续波腔衰荡技术原理推导及实验研究

基于无源腔的Q值定义,根据能量守恒原理,对连续波腔衰荡技术测量原理进行了推导,并基于多光束干涉理论,就入射光关断时间对腔出射光强信号衰荡线形及测量结果的影响进行了数值模拟和分析,分析表明：入射光的关断时间很大程度上决定着腔出射光功率信号的衰减线形,如果要消除入射光关断时间对测量结果的影响,入射光关断必须小于腔衰荡时间的1%。根据理论分析要求建立了一套测量系统,并对腔损耗约为50ppm的低损无源腔进行了实际测量,实验结果的分析显示,该测量系统测量误差约为0．15ppm。     

空泡溃灭水锤的VOF计算方法

空泡溃灭水锤是核电厂冷却循环系统中较常出现的一种严重的水锤事故。空泡的形成和溃灭是复杂的两相、瞬态过程，对于这一现象的分析是相当困难的。作者尝试着把蒸汽泡的边界看成是冷水流动的自由面，在自由面上考虑蒸汽的凝结。对于自由面的ＶＯＦ算法用了ＶＯＦ算法，取得了令人满意的结果，不仅形象地描绘了空泡的形成和溃灭的过程，而且得到了与实验相符的空泡溃灭高压和弥合速度，因此可为管道设计提供理论基础。     

锻模型腔的电解加工技术

通过电解加工与其它常用加工方法的比较，以及电解加工应用的实例，论证了电解加工是提高锤模型腔加工水平的重要工艺手段。     

低压片状模塑料增稠工艺研究

采用氧化镁为增稠剂、结晶树脂以粉料形式加入而降低片材热模内粘度的工艺，改进了对低压片状模塑料的增稠方法。结果表明：采用此工艺，设备不需要加热，增稠符合传统SMC增稠曲线；片材在模腔内有较低的粘度，适宜于低压成型。     

型腔体组件装配尺寸检测技术分析与运用

为解决型腔体组件装配尺寸的检测问题,以某枪型的型腔体组件为例,分析该型腔体组件的结构特点,设计组合型检测装置,实现准确检测目的.归纳总结了型腔体组件装配尺寸检测技术运用过程中检测装置的设计要领,采用设计与被测型腔体组件相匹配的组合型检测装置,有效解决了型腔体组件装配尺寸检测过程中的定位困难、操作繁琐、检测准确性差等问题.该检测技术对确保型腔体组件装配尺寸的检测稳定性、检测可操作性、检测准确性等方面具有现实的指导意义.     

Computational fluid dynamics (CFD) analysis and experimental study for toxic hazardous waste destruction in the cavity incinerator

We undertook numerical and experimental studies to develop a better incineration method for the destruction of CC1₄. A phenomenological model for the turbulent reaction of CC1₄, including a flame inhibition feature, has been successfully incorporated into a commercial code, simulating the incineration processes of this compound. The gaseous flow solution was obtained using SIMPLEST, a derivative of Patankar’s SIMPLE algorithm, with a k-ε turbulence model. A modified fast chemistry turbulent reaction model was developed to describe the flame inhibition due to the presence of CC1₄, considering the corresponding burning velocity data of these mixtures. An experiment was carried out on a 5.2 kW laboratory scale, transportable, cavity-type incinerator, which warrants a sufficient residence time and effective turbulent mixing by the formation of a strong recirculation region in a combustor. To this end, the specific configuration of the incinerator was manufactured to consist of two opposing jets and a rearward facing step. The calculated data were in close agreement with the experimental data for the concentrations of major species, such as CCI₄ and HCl, together with the temperature profiles. The experimental test gave the desired DRE of above 99.99%.     

镦粗变形规律实例分析

本文结合实际镦粗变形工艺，把镦粗变形划分为三个阶段或状态，即锻透、压实、焊合；指出空调压实后的形态或痕迹与空洞的形状，大小，空洞与主拉形变的方向有关，坯料镦粗时仅仅考虑整体锻比是不够的，还必须注意单次压下量，并介绍了一种既能压实焊合空洞类缺陷，又能改善夹杂物分布的新型Ｖ型板镦粗工艺。     

钢管漏磁探伤中孔洞缺陷的漏磁场分析

针对钢管孔洞缺陷进行了分析。分别从数学模型和仿真软件建模等方面对孔洞缺陷进行了漏磁场分析，并且将采集的漏磁信号进行处理，得出孔洞半径与漏磁信号之间的关系，为孔洞缺陷信号的识别提供了一定的参考依据。     

Buoyancy convection in a cavity with mutually orthogonal heated plates

Buoyancy driven convection in a square cavity induced by two mutually orthogonal arbitrarily placed heated thin plates is studied numerically under isothermal and isoflux boundary conditions. The flow is assumed to be two-dimensional. The coupled governing equations were solved by the finite difference method using the Alternating Direction Implicit technique and Successive Over Relaxation method. The steady state results are depicted in terms of streamline and isotherm plots. It is found that the resulting convection pattern is stronger for the isothermal boundary condition. A better overall heat transfer can be achieved by placing one of the plates far away from the center of the cavity for isothermal boundary condition and near the center of the cavity for isoflux boundary condition.