固定化微生物脱除工业酸性废气中H_2S的研究

以H 2软性填料作为氧化亚铁硫杆菌的固定化载体 ,构成了固定床生物反应器。在一定操作条件下 ,考察了固定床生物反应器对Fe2 +的氧化速率 ,最大可达 7.6 7g/ (L·h)。并对固定床生物反应器运行中在载体表面形成的络合物进行了研究 ,X射线衍射证明此络合物为黄钾铁矾 [KFe3(SO4 ) 2 (OH) 6]。     

Biodesulphurization of Hungarian lignite and sub-bituminous coal

The annual SO₂ emission is approx. 0.6 million tons in Hungary because of the high amount of sulphur in the power plant coals. Since Hungary has signed the European Environmental Agreement, the high sulphur emission has to be gradually reduced. To overcome the acid rain problem, the biodesulphurization of Hungarian power plant coals has also been started in Hungary. The R&D programe of biodesulphurization has been launched in 1990. According to our findings the biodesulphurization process is a suitable tool for reducing the pyritic sulphur content in lignite and sub-bituminous coal.     

Bioleaching of refractory gold ore （ Ⅱ ）——Mechanism on bioleaching of arsenopyrite by Thiobacillus ferrooxidans

1　ＩＮＴＲＯＤＵＣＴＩＯＮＢｉｏｌｅａｃｈｉｎｇｐｒｏｃｅｓｓｅｓｈａｖｅｂｅｅｎｕｓｅｄｅｘｔｅｎｓｉｖｅｌｙｔｏｒｅｃｏｖｅｒｂａｓｅｍｅｔａｌｓ (ｍａｉｎｌｙｃｏｐｐｅｒ)ａｎｄｕｒａｎｉｕｍｆｒｏｍｌｏｗ ｇｒａｄｅｏｒｅｓａｎｄｍｏｒｅｒｅｃｅｎ     

Ni2+、Cu2+、Zn2+对氧化亚铁硫杆菌氧化 活性影响

为研究金属离子对氧化亚铁硫杆菌（Acidithiobacillus ferrooxidans,At.f）氧化活性的影响,通过测定经初步驯化的At.f菌在不同初始pH下的生长活性,开展不同浓度梯度的Ni2+、Cu2+、Zn2+及三种金属离子共存时对At.f菌的氧化活性影响的试验。结果表明,当初始pH为1.8时,At.f菌生长活性最好,且低浓度的Ni2+、Zn2+对At.f菌氧化活性影响较小,对两种金属离子的耐受浓度均在20 g/L以上;而该细菌对Cu2+比较敏感,当Cu2+浓度为2.5 g/L时,菌株的生长活性明显下降,特别是10 g/L时,对At.f菌的氧化能力有显著的抑制作用。三种金属离子同时存在时对At.f菌氧化活性的影响大于单一金属离子,当三种金属离子的浓度均为2.5 g/L时,在48小时内对At.f菌的氧化能力有显著的抑制作用,当三种金属离子的浓度均为5 g/L时,80小时时菌株对Fe2+的氧化率极低,说明At.f菌需要经过多种金属离子共存驯化培养后才能更好地运用于多金属复杂矿物的处理。     

固定化氧化亚铁硫杆菌处理硫化氢新工艺研究

用单一的生物反应器处理硫化氢时,微生物容易受到硫化氢的毒害作用而使细胞活力受损,废气处理效率迅速降低。为此,提出生物和化学二级反应器处理硫化氢的新工艺,并对微生物的生长、分布、最适工艺运行条件和影响因素等做了研究。结果表明,生物反应器中微生物对亚铁离子的氧化速率对硫化氢的去除效果有着重要的影响,二级反应器工艺大大提高了硫化氢去除效率,反应的主要产物为单质硫,同时便于对硫沉淀的分离,在操作温度31℃,pH值1.5—1.8,水力停留时间2.5 h,进气质量浓度8 g/m3,硫化氢承载负荷2 000 g/(m3.h)以下时,系统可以稳定运行,硫化氢的脱除率可达99%以上。     

化能自养型硫杆菌脱硫机制及脱硫策略

介绍了对化能自养型硫杆菌氧化煤中黄铁矿硫机制的认识过程,讨论了黄铁矿生物氧化机制的新观点:主要包括黄铁矿生物氧化的电化学本质、黄铁矿表面吸附细菌的功能、黄铁矿生物氧化的具体反应途径。采用氧化还原电势或[Fe3+]/[Fe2+]比建立的速率方程可用于描述化能自养型硫杆菌的生物氧化过程,其中中间产物元素硫的进一步氧化可能是限速步骤。针对目前黄铁矿生物氧化机制的新认识,提出了提高煤系黄铁矿硫生物脱除效率的研究策略。此外,如研究证实元素硫为超高硫煤中有机相硫的一部分,化能自养型硫杆菌也将能用于脱除煤中该部分有机硫。     

Modification of oxidizing activity of Thiobacillus ferroxidans by some particulate solids

Different particulate solids such as glass powder, various types of activated carbon and bentonite suspended in Thiobacillus ferrooxidans cultures produce very different effects on the oxidizing activity of the microorganism. The atmospheric oxygen uptake by Thiobacillus ferrooxidans in Warburg respirometer flasks containing 9K medium with ferrous sulfate as energy source and suspended bentonite is 2.8 times that in the absence of solids. The dissolution rate of pure pyrite in 250 cm³ shake flasks containing 9K medium and bentonite is considerably enhanced over that where the only solid phase is pyrite. Conversely, the oxidizing ability of the microorganism seems to be inhibited by all the activated carbons tested. The effect of ground glass seems to be related to its particle size distribution. Implications for the bioleaching of sulfide ores and coal pyrite are discussed in the light of current knowledge on the adsorption of Thiobacillus ferrooxidans cells on solid surfaces.     

固定化脱氮硫杆菌净化硫化氢气体的研究

以海藻酸钙包埋脱氮硫杆菌制成的固定化微生物颗粒填充生物固定床,用以净化低浓度H2S废气。实验研究了温度、pH值、进气浓度及流速对反应体系中的H2S脱除率的影响,测定了生物固定床中代谢物的种类及其含量。结果表明当进气口的质量浓度低于6×10-5mg/L、25～40℃、pH值在6.0～7.5范围时,生物固定床对废气中H2S的脱除率可达90%以上,在反应过程中pH值保持不变;进气口的流速对不同浓度的H2S的影响较大,当进气口H2S质量浓度为3×10-5mg/L且流速在35L/h时,脱除率高达95%以上。元素硫作为主要产物防止了生物固定床的酸化,并保证脱硫装置的稳定性。     

嗜酸氧化亚铁硫杆菌驯化条件的研究

随着办研究氧化亚铁硫杆菌结果表明,最佳培养温度为30℃左右,最佳生长pH为2.0～2.5,最佳生长初始Fe2＋浓为0115mol/L左右,在进行细菌培养时接种量取10%比较恰当。低pH值和高浓度Fe2＋驯化后,在培养温度30℃、初始pH值1.5、初始Fe2＋浓度25g/L条件下,氧化亚铁硫杆菌仍能保持一定的Fe2＋氧化活性,6天Fe2＋氧化率可达82.28%,Fe2＋平均氧化速率达3.43g/L/d,pH值的变化是先上升后下降,最后稳定在1.81。     

New Method of Manufacturing Micro Parts Using Thiobacillus Ferrooxidans

A new method of processing and manufacturing certain parts of instruments through biological approach is studied. Knowledge of feasibility of micro-manufacturing is obtained by comparing experimental results of etching surfaces of copper, aluminium alloy, brass, steel and stainless steel using strain of Thiobacillus ferrooxidans (T.f.). Our experimental results show that certain metals can be etched using T.f., the most feasible material is copper, followed by brass, etc., with stainless steel the least. The surface of the stainless steel material is nearly unchanged during surface-etching. Micro parts made of copper or brass can be satisfactorily processed with T.f. and the rate of processing on copper is about 14?μm/h. Furthermore, surface roughness and processing speed are controlled by pH value and temperature of etching liquid, in addition to swing rate of the the swing bed.