探讨DiffServ在MPLS上的实现

本文介绍了为保证IP网QoS的MPLS,DiffServ及MPLS与DiffServ的结合问题。     

Study of miscibility,crystallization, mechanical properties,and thermal stability of blends of poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)

Natural amorphous polymer poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P3HB4HB) containing 41 mol % of 4HB was blended with poly(3‐hydroxybutyrate) (PHB) with an aim to improve the properties of PHB. The influence of P3HB4HB contents on thermal and mechanical properties of the blends was evaluated with differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, stress–strain measurement and thermo gravimetric analyzer. Miscibility of PHB/P3HB4HB blends was mainly decided by the contents of P3HB4HB. When P3HB4HB exceeded 50 wt %, the two polymer phases separated and showed immiscibility. The addition of P3HB4HB did not alter the crystallinity of PHB, yet it diluted the PHB crystalline phase as revealed by DSC studies. DSC and FTIR results showed that the overall crystallinity of the blends decreased remarkably with increasing of P3HB4HB contents. Decreased glass transition temperature and crystallinity imparted desired flexibility for the blends. The ductility of the blends increased progressively with increasing of P3HB4HB content. Thus, the PHB mechanical properties can be modulated by changing the blend composition. P3HB4HB did not significantly improve the thermal stability of PHB, yet it is possible to melt process PHB without much molecular weights loss via blending it with suitable amounts of P3HB4HB. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

从微生物细胞中分离提取PHB的方法的综述

介绍和归纳目前文献报导的从微生物细胞中分离提取ＰＨＢ的各种方法，包括溶剂萃取法，化学试剂法，机械破碎法和酶法。对这些方法的优缺点进行了评述，提出发展机械的，物理的，化学的，生物的多种方法相结合以去除菌体中非ＰＨＢ的杂质来分离提取ＰＨＢ半是今后研究的一个方向。     

Eco-friendly electronics,based on nanocomposites of biopolyester reinforced with carbon nanotubes: a review

ABSTRACT

Fabrication of electronic materials from nanocomposite of biopolyesters reinforced with carbon nanotubes can be regarded as the effective alternative for conventional nanocomposites consisting of non-biodegradable polymers. Commercial availability of biopolyester-based nanocomposites is limited because of their high cost compared to other polymers, but the factor of their compostable nature is worthless for environmental protection. Such nanocomposites have potential applications in biodegradable sensors, EMI materials, etc. In this review, the current progress of biopolyester/CNTs nanocomposites in the field of biodegradable electronics is reviewed and also the impact of CNTs dispersion on electrical, thermal and mechanical properties of eco composites is stipulated.     

PHB在生产可降解塑料方面的应用及其微生物累积的研究进展

着重介绍了聚β-羟基丁酸（PHB）的一些性质、用途以及在生产可降解塑料方面的应用情况，同时也介绍了微生物累积PHB的情况，并对微生物累积PHB以及PHB的研究发展提出了一点建议。     

外碳源投量对亚硝酸型反硝化过程N2O释放影响

为实现N_2O的减量化控制或资源化利用,接种普通活性污泥,以乙酸钠和硝酸盐为基质,通过淘洗反硝化聚磷菌,在SBR中以厌氧/缺氧交替运行的方式启动內源反硝化,单周期内约50%的NO-3-N转化为NO-2-N,N_2O释放速率随着亚硝酸的积累逐渐增大,N_2O转化率(释放量占TN去除的比例)为2.04%.在此基础上,分别取缺氧末和厌氧末污泥,对比研究胞内聚合物PHB合成前后,外碳源投加量(碳氮比为0,0.75和2.50)对亚硝酸型反硝化过程N_2O释放特性的影响,结果表明,外碳源存在时,N_2O释放量随总碳源的增加呈略微减少的趋势,转化率在0.24%~1.61%;而当仅利用內源物质进行反硝化时,N_2O的转化率高达15.90%,单位SS最大释放速率达71.29μg/(min·g),释放量是其余条件下的14~26倍.表明单独利用PHB进行亚硝酸型反硝化会大幅增加N_2O的释放.     

Effect of ageing and annealing on the mechanical behaviour and biodegradability of a poly(3‐hydroxybutyrate) and poly(ethylene‐co‐methyl‐acrylate‐co‐glycidyl‐methacrylate)blend

Poly(3‐hydroxybutyrate) (PHB) undergoes an ageing process that contributes to its remarkable fragility. Blending it with an elastomer is a possibility to increase toughness. In this work, the mechanical properties of a 70/30 wt% blend of PHB and poly(ethylene‐co‐methyl‐acrylate‐co‐glycidyl‐methacrylate) were studied over time. The phenomenon of ageing affected the blend, which lost its ductility and became fragile days after its processing. Differential scanning calorimetry and small angle X‐ray scattering analyses showed that this drop in mechanical properties was due to changes in the crystalline structure of the matrix. Annealing reduced fragility, increased toughness and prevented a re‐ageing of the blend. Biodegradation in soil was also more intense for annealed samples. © 2013 Society of Chemical Industry     

A／ASBR中PHB转化与反硝化吸磷的关系研究

通过COD浓度对A/ASBR反硝化除磷脱氮系统的影响试验表明,过高或过低的COD都不利于反硝化除磷系统的正常运行,当COD=220～300mg/l时,可以获得较为理想的处理效果.发现了缺氧段残存的外碳源有机物和厌氧储存的胞内碳源PHB对反硝化除磷过程的影响;试验结果进一步表明以PHB为碳源的反硝化除磷过程中,PHB的消耗与反硝化除磷脱氮具有良好的相关关系,并且2 mg NO3--N的转化可以促进1 mg PO3-4-P的吸收.     

聚羟基丁酸酯球晶的微观结构及其对力学性能的影响

本文采用基于数字图像相关计算技术的显微数字分析系统,结合原子力显微镜等,实验研究了晶态高聚物聚羟基丁酸酯(PHB)的细观结构及对其力学性能的影响规律.结果发现:实验用的PHB球晶是台阶式生长或螺旋式生长,其生长台阶高度差在200nm～500nm之间;PHB球晶同心圆环随着结晶温度的提高,同心圆环的环间距增大.球晶结晶度、球晶尺寸对冲击强度、拉伸强度以及断裂伸长率的影响呈线性关系.