六甲氧基甲基三聚氰胺-多元醇-丙烯酸酯混杂聚合体系的研究

六甲氧基甲基三聚氰胺 (HMMM) 多元醇 丙烯酸酯 酸催化剂混杂聚合体系在高温下同时进行缩聚和自由基聚合并表现出协同效应 .体系中的活泼亚甲基在HMMM的催化下被空气氧化成过氧化氢物 ;过氧化氢物在酸催化下分解成自由基进而引发自由基聚合反应 .研究结果表明 ,体系中存在固化加速的协同效应 ;同时体系中还存在热互补效应 ,丙烯酸酯的自由基聚合反应放出的热可以传递给缩聚反应 ,满足缩聚反应吸热的要求 .混杂聚合得到的高分子合金膜具有优良的机械性能和耐溶剂性能 ,这是由于在混杂聚合过程中形成了互穿聚合物网络 (IPN)结构 .使用潜酸催化剂作为酸的来源 ,可以提高体系的储存稳定性 ;交联 引发剂的使用可以拓宽它的使用范围 ;对超枝化聚合物在混杂体系中的应用也进行了初步研究     

六甲氧基甲基三聚氰胺-多元醇-丙烯酸酯混杂聚合过程热互补效应的研究

六甲氧基甲基三聚氰胺（HMMM）－多元醇－丙烯酸酯－酸催化剂的混合体系在较高温度下同时进行缩聚和自由基聚合并表现出协同效应，DSC研究结果表明，丙烯酸酯在HMMM和酸的催化作用下可在较低温度下发生自由基聚合反应，并把反应释放出来的大量的热量有效地传递给缩聚发反应，满足缩聚反应吸热的要求，从而节省固化所需要的能量，为了提高储存稳定性。本文以潜酸催化剂作为酸的来源，对该混杂聚合体系进行了研究，仍有明显的热互补效应。     

密胺-脲甲醛树脂合成工艺放大研究

以密胺－脲甲醛树脂合成的小试工艺条件为依据，完成了放大试验过程的工艺研究。研究结果与小试研究的工艺条件相吻合。     

Demonstration of methylene-ether bridge formation in melamine-formaldehyde resins

¹H and ¹³C NMR have been used for the quantitative determination of methylene-ether bridges in melamine-formaldehyde (MF) resins. The amount of methylene-ether bridges was determined by ¹³C NMR from the number of monomethylolated amino groups consumed in the condensation reactions and is in agreement with that calculated from the condensation water contents. This latter method, which involves a combination of ¹H and ¹³C NMR, is based on the amount of condensation water released during the formation of both methylene and methylene-ether bridges. © 1995 John Wiley & Sons, Inc.     

A mixed-ligand approach for building a N-rich porous metal-organic framework for drug release and anticancer activity against oral squamous cell carcinoma

Abstract

A new Zn(II) metal-organic framework (MOFs), [Zn(BTC)(HME)]·(DMAc)(H₂O) (1, H₃BTC =1,3,5-benzenetricarboxylic acid, HME?=?protonated melamine, DMAc?=?N,N-dimethylacetamide), has been synthesized under solvothermal conditions. In the structure of 1, the four-coordinate Zn(II) ions are connected by BTC^3? ligands into a 3-D framework with (3)-connected utg-type topology. This MOF shows permanent porosity after lattice solvent removal with a calculated pore size distribution around 0.72?nm. With abundant N-donor sites and suitable pore size, the desolvated 1 (1a) was used as a drug carrier for the loading of anticancer drug 5-fluorouracil (5-Fu) molecules. Moderate 5-Fu loading capacity and long drug release time were observed for 1a. The computational simulation results reveal that strong H-bond interactions between the 5-Fu molecules and the nitrogen sites allow slow release of the drug 1a. In addition, the in vitro cytotoxicity of 1 and 5-Fu loaded 1a were also evaluated using MTT assays against human oral squamous cell carcinoma (SCC-251 and HSC-4).     

Studies on Melamine Modified Polyesteramide as Anticorrosive Coatings from Linseed Oil: A Sustainable Resource

Melamine modified polyester amide (MPEA) was synthesized by the reaction of linseed oil fatty amide. The resin was further cured at room temperature by polystyrene co‐maleic anhydride (SMA) in different phr (30–80) to obtain MPEA coatings. The probable structure of MPEA was confirmed by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopic techniques. The physico‐chemical characterization of these resins viz. iodine value, saponification value, refractive index, inherent viscosity were carried out by standard methods. MPEA (40 wt%) solution in ethylene glycol monomethyl ether (EGME) was applied on a mild steel strip of standard sizes to study their physico‐mechanical and chemical resistance properties. It was found that coatings of MPEA with 60 parts per hundred of the resin (phr) of SMA showed the best performance in physico‐mechanical and alkali resistance properties. Thermal stability and curing behavior were studied by Thermo Gravimetric Analyses (TGA) and Differential Scanning Calorimetry (DSC), respectively.     

Extraction of parabens by melamine sponge with determination by high-performance liquid chromatography

In the present study, we propose a novel method for the extraction of parabens in personal care products. A new, simple adsorptive material was obtained by combining metal-organic frameworks and melamine sponges using the adhesive property of polyvinylidene fluoride. This new material, metal-organic frameworks/melamine sponges, was found to be particularly suitable for solid-phase extraction. The structural characteristics of metal-organic frameworks/melamine sponges were first analyzed by scanning electron microscopy. Subsequently, solid-phase extraction was performed on sample solutions, and the extracted substances were then analyzed by high-performance liquid chromatography. Following optimization of important experimental conditions, excellent recovery rates were obtained. Our novel method was then applied to the extraction of four parabens (methylparahydroxybenzoates, ethylparahydroxybenzoates, propylparahydroxybenzoates, and butylparahydroxybenzoates) from real samples. The results yielded limits of detection of 0.26–0.41 ng/mL. The inter- and intra-day recoveries were 104.0–109.7% and 91.2–98.1%, respectively (relative standard deviation, <13.8%).     

基于氮掺杂活性炭催化氧化合成氮甲基氧化吗啉的研究

以三聚氰胺为氮源,商用活性炭为研究对象,通过“浸渍吸附+高温热处理”的方式制得系列氮掺杂活性炭,并用于催化氧化合成氮甲基氧化吗啉（NMMO）。采用N₂吸附/脱附、Raman、XPS等对氮掺杂活性炭的孔结构和表面性质进行了表征。结果表明：随着三聚氰胺负载量的增大,氮掺杂活性炭的表面碱性含氮官能团含量增大,进而体现出更好的催化氧化合成NMMO活性。最佳催化剂（ACO850-20N）在催化剂加量为0.02 wt%,反应温度70 ℃和反应时间4 h的工艺条件下,氮甲基吗啉的转化率和NMMO收率可达99.76%和94.31%。      

固相萃取-亲水相互作用色谱/串联质谱法同时测定食品中三聚氰胺和三聚氰酸

建立了固相萃取-亲水相互作用色谱/串联质谱同时测定食品中三聚氰胺和三聚氰酸残留量的方法。采用乙腈和水提取试样中残留的三聚氰胺和三聚氰酸,正己烷脱脂,提取液经亲水性键合硅胶和阳离子交换树脂复合填料柱(MCT柱)净化。采用亲水相互作用色谱柱进行分离,质谱采用正、负离子切换模式电离,多反应监测模式检测,同位素内标法定量。三聚氰胺和三聚氰酸在10～2500 μg/L范围内呈线性相关,相关系数(r)均大于0.99,定量限分别为25和50 μg/kg。本方法在动物源性食品、植物源性食品、乳及乳制品等不同样品中的三聚氰胺和三聚氰酸高、中、低3个添加水平的回收率分别在70.0%～129.6%和70.0%～128.6%之间,相对标准偏差分别在1.4%～23.3%和2.8%～18.7%之间。该方法可满足食品中三聚氰胺和三聚氰酸同时定量测定的需要。     

氮掺杂碳气凝胶电极材料的制备及性能

以三聚氰胺（M）、间苯二酚（R）和甲醛（F）为原料,经溶胶-凝胶法、超临界干燥和高温碳化制备了系列的氮掺杂碳气凝胶（NCAs）。X射线光电子能谱(XPS)分析表明,氮元素成功地引入到碳气凝胶中,并且可以通过调节三聚氰胺掺杂量来控制氮掺杂量;扫描电子显微镜（SEM）和N2吸附测试显示出不同氮掺杂量的碳气凝胶的微观结构差异较大,随着氮含量的增加,比表面积有先减后增的趋势;在6 mol/L KOH溶液中进行的恒流充放电和循环伏安测试表明,引入氮元素能够极大地改善碳气凝胶的电化学性能,最高比电容量达176 Fg-1,并且凝胶具有良好的电容特性和可逆性。