亲子乐园空调送风方式的数值模拟研究

大型综合室内亲子乐园属于高大空间,设有游乐设施和游戏的特殊性使得对空间的舒适性要求一致,但是送风气流遇阻严重,室内存在较多气流死角,影响室内空气质量和儿童健康。因此其空调设计不仅需要考虑温度、风速的空间均匀度,还要考虑各点的空气龄和PMV-PPD指标。以天津某亲子乐园为研究对象,利用scSTREAM软件对适用于该房间的辐射供冷加新风、置换通风、混合通风三种空调方式的送风效果进行数值模拟分析,从流场的均匀性、人员的热舒适性等方面对模拟结果进行探讨,研究结果表明辐射供冷加新风方式的空间均匀性和PMV指标最佳,混合通风方式的空气龄最小。     

Science fiction reduces the eeriness of android robots: A field experiment

As suggested by the uncanny valley hypothesis, robots that resemble humans likely elicit feelings of eeriness. Based on the psychological model of meaning maintenance, we expected that the uncanny valley experience could be mitigated through a fictional story, due to the meaning-generating function of narratives. A field experiment was conducted, in which 75 participants interacted with the humanlike robot Telenoid. Prior to the interaction, they either read a short story, a non-narrative leaflet about the robot, or they received no preliminary information. Eeriness ratings were significantly lower in the science fiction condition than in both other conditions. This effect was mediated by higher perceived human-likeness of the robot. Our findings suggest that science fiction may provide meaning for otherwise unsettling future technologies.     

航空发动机复杂扭曲叶片分步电解加工研究

为实现复杂扭曲叶片在较小间隙下的稳定加工,提出了一种分步式电解加工的工艺方法,建立了复杂扭曲叶片小间隙(0.2 mm)和大间隙下(0.5 mm)扭曲流道的流道模型,采用有限元法进行了流场仿真研究,结果表明增加流道间隙可以解决流道中涡流和流场紊乱的问题。开展了复杂扭曲叶片小间隙连续式加工和分步式加工的试验研究。结果表明,采用小间隙连续式加工,当阴极进给至3.8 mm位置时,在叶片排气边靠近叶根流道扭曲处出现短路打火情况;而采用分步式加工方式能够实现加工的顺利进行。     

Back-analysis of geotechnical parameters on PVD-improved ground in the Mekong Delta

This study presents a back-analysis of geotechnical parameters on prefabricated vertical drain improved ground at a site in the Mekong Delta. Various time?settlement behaviors that reflected different clay thicknesses and loading patterns were observed. The total surface settlement behavior at several monitoring locations was simulated using an updated exponential method that considered staged construction. The analyzed results were validated by substituting the values into a theoretical solution for radial consolidation. The estimated theoretical behaviors were comparable with the monitored behaviors. The geotechnical parameters were back-analyzed by applying the previously analyzed results to various theoretical and empirical formulas. However, the use of extensometer data that were installed at large intervals produced different values of the geotechnical properties. Furthermore, finite element analysis supported the back-analyzed total settlement behaviors and nearly disregarded the application of the geotechnical properties that were obtained using either surface or subsurface settlement data. However, settlements and excess pore pressures in the sublayers were not successfully predicted even when the geotechnical properties were adjusted. Thus, subsurface instruments that can be installed closely in thick clay deposits are required to reliably reevaluate the variations in geotechnical properties along a certain depth.     

Highly textured and strongly anisotropic TiB2 ceramics prepared using magnetic field alignment (9T)

Highly textured TiB₂ ceramics were prepared by slip casting an aqueous suspension in a magnetic field of 9 T, followed by sintering using Field Assisted Sintering Technology (FAST). Particle size refinement by ball milling improved both the degree of texturing and densification of the material (RD > 98 %). The sintered material exhibited a Lotgering orientation factor of 0.90, with the c-axis of TiB₂ oriented parallel to the magnetic field and FAST pressing direction. The texturing effect induced by the uniaxial pressing was negligible. The textured TiB₂ material exhibited a significant anisotropy in mechanical properties; the values of hardness and indentation elastic modulus measured along directions transverse to the c-axis of TiB₂ were 37 % and 13 % higher than the ones measured along the c-axis direction. Moreover, the specific wear rate of a surface of textured TiB₂ parallel to the field was one order of magnitude lower than a surface perpendicular to the field.     

利用高频结构仿真器分析波导魔T

高频结构仿真器（HFSS）是一种微波器件设计软件，该软件界面友好，通过仿真计算减小了调试工作量，使得微波器件的设计变得简单易行。本文利用HFSS对波导魔T进行了仿真分析，得到了该器件的S参数和动、静态场的分布情况，并对该器件进行了优化设计。     

对理想弯曲街道进行场强预测的方法

提出了一种新的射线跟踪接收判断技术,它是已有的两类射线跟踪技术的结合,能够解决曲面反射的问题。这种新技术能够在任意形状建筑物组成的复杂环境中进行场强预测。而且此种方法可以自由的改变接收球的半径,以满足精度的需要。     

川西新场气田JS2^1气藏测井多参数评价方法

针对川西新场气田JS2^1气藏开展了多参数的综合评价研究，多参数包括储层参数、裂缝参数、储层分类厚度参数。首先，开展了储层参数及裂缝参数的计算，以岩心分析结果为依据，建立了孔隙度、渗透率、含水饱和度计算模型。利用铸体薄片进行了微裂缝识别，对样品的裂缝参数和测井曲线进行相关分析，建立了测井计算裂缝参数的数学模型；其次，对储层进行聚类分析，通过聚类将储层分为三类；最后，将计算的裂缝参数、储层分类中的Ⅰ类储层厚度、孔渗饱等参数进行正态化处理，拟和测试的无阻流量与这些参数建立多元回归计算模型，即综合含气指标的数学计算模型。以综合含气指标为主要依据，进行储层综合分类和评价，指出了有利的含气区域和可供挖潜井的建议。该方法在指导气藏开发中获得了良好效果。     

利用静电学和测量数据对碳纳米管膜场致发射规律的定量分析

碳纳米管膜的场致发射电流密度仅由它表面的宏观电场决定，无论其表面形状是平的还是半球状的。对于理想的平行板电极系统，其表面电场强度均匀（UId），发射电流密度、总电流与发射面积成正比：对于半球一平面电极系统半球形的阴极存在一个宏观场增强因子ks，一个与两极距离和球半径之比（d/r）相关的函数，其表面的平均场强为ks U/d。对于d/r=0，ks=1，d≥r的情况，ks接近于常数。对于10〈d／r〈100的情况，存在一个经验的表达式：ks=1＋0．15d/s=0．005（d／r）^2。在引入ks后，不同作者给出的平面电极系统和半球一平面电极系统碳纳米管膜的场致发射电流I与宏观表面电场强度E的关系都可以近似用-经验公式描述：I=a（E-Eo）^b，a，b为常数。该经验公式可为稳定生产的CNT膜片应用产品设计提供方便。     

川西新场气田JS_2~1气藏测井多参数评价方法

针对川西新场气田JS12气藏开展了多参数的综合评价研究,多参数包括储层参数、裂缝参数、储层分类厚度参数。首先,开展了储层参数及裂缝参数的计算,以岩心分析结果为依据,建立了孔隙度、渗透率、含水饱和度计算模型。利用铸体薄片进行了微裂缝识别,对样品的裂缝参数和测井曲线进行相关分析,建立了测井计算裂缝参数的数学模型;其次,对储层进行聚类分析,通过聚类将储层分为三类;最后,将计算的裂缝参数、储层分类中的Ⅰ类储层厚度、孔渗饱等参数进行正态化处理,拟和测试的无阻流量与这些参数建立多元回归计算模型,即综合含气指标的数学计算模型。以综合含气指标为主要依据,进行储层综合分类和评价,指出了有利的含气区域和可供挖潜井的建议。该方法在指导气藏开发中获得了良好效果。