Investigation of Bimetallic Nickel Catalysts in Catalyst‐Transfer Polymerization of π‐Conjugated Polymers

A comparative study involving bimetallic nickel catalysts designed from disubstituted N,N,N′,N′‐tetra(diphenylphosphanylmethyl)benzene diamine bridging ligands is reported. Catalyst behavior is explored in the Kumada catalyst‐transfer polymerization (KCTP) using poly(3‐hexylthiophene) (P3HT) as the model system. The success of a controlled polymerization is monitored by analyzing monomer conversion, degree of polymerization, end‐group identity, and molecular weight distribution. The characterization of P3HT obtained from KCTP initiated with the bimetallic catalysts shows chain‐growth behavior; however, the presence of Br/Br end‐groups and broader molecular weight distribution reveals a reduced controlled polymerization compared to the commonly employed Ni(dppp)Cl₂. The observed increase in intermolecular chain transfer and termination processes in KCTP initiation with the bimetallic catalysts can be attributed to a weaker Ni(0)‐π‐aryl complex interaction, which is caused by increased steric crowding of the coordination sphere.     

Direct Observation of a Cyclic Vinyl Polymer Prepared by Anionic Polymerization using N‐Heterocyclic Carbene and Subsequent Ring‐Closure without Highly Diluted Conditions

A 1:1 adduct of methyl sorbate (MS) and 1,3‐di‐tert‐butylimidazol‐2‐ylidene (NHCtBu) initiates anionic polymerization of a nonconjugated polar alkene, allyl methacrylate (AMA) in toluene at ?20 °C. After the monomer is consumed quantitatively using a bulky aluminum Lewis acid, methylaluminum bis(2,6‐di‐tert‐butyl‐4‐methylphenoxide) (MAD), as an additive, successive ring‐closure occurs without highly dilute conditions to give a cyclic poly(AMA) containing α‐terminal MS unit, and an M_n of 8.8 × 10³?58.5 × 10³ with a narrow molecular dispersity index (M_w/M_n = 1.1₄–1.3₇). The lack of a need for dilution is due to the fact that an α‐terminal NHCtBu group is acting as the counter cation for the propagating center in the polymerization. From ¹H NMR and matrix assisted laser desorption/ionization (MALDI‐TOF) mass spectra, combined with transmittance electron microscope (TEM) observation of a synthesized poly(AMA) with longer alkyl side chains prepared via a thiol‐ene click reaction, it is concluded that once the monomer is consumed, nucleophilic attack at the neighboring methine of the α‐terminal NHCtBu residue by the propagating anionic center causes ring‐closing to cyclic poly(AMA).     

SCHWANN CELLS AND THE REGROWTH OF AXONS IN THE MAMMALIAN CNS: A REVIEW OF TRANSPLANTATION STUDIES IN THE RAT VISUAL SYSTEM

1. We have used peripheral nerve transplants or cultured Schwann cells grafted in association with different types of polymer to study axonal regrowth in the rat visual system. In some instances the glia were co-grafted with fetal tectal tissue. 2. The studies have two main aims: (i) to determine whether retinal axons can be induced to regrow at a site distant from their cell soma, that is, after damage to the brachial region of the optic tract; (ii) to determine whether retinal axons exposed to Schwann cells retain the ability to recognize their appropriate target neurons in CNS tissue. 3. In brachial lesion studies, Schwann cells were placed in the lesion site in association with nitrocellulose papers, within polycarbonate tubes in the presence or absence of a supporting extracellular matrix (ECM), or within polymer hydrogel scaffolds. Autologous sciatic nerve grafts were also used. Immuno-histochemical studies revealed the presence of regenerating axons within all polymer bridges. Regrowth of retinal axons was also seen, however, growth was not extensive and was limited to the proximal 1–1.5 mm of the implants. 4. In target innervation experiments, two surgical paradigms were developed. In one experiment, a segment of sciatic nerve was autografted onto the transected optic nerve in adult rats and the distal end of each graft was placed adjacent to fetal tectal (target) tissue implanted into the frontal cortex. To date, we have not been able to demonstrate selective recognition of target regions within tectal transplants by retinal axons exiting the sciatic nerve implants. 5. In the second experiment, Schwann cells were mixed with fetal tectal cells and co-grafted to the midbrain of newborn host rats. Schwann cells altered the characteristic pattern of host retinal growth into tectal grafts; in some cases axons were induced to grow away from appropriate target areas by nearby co-grafted Schwann cells. 6. In summary, Schwann cell/polymer scaffolds may provide a useful way of promoting the regrowth of damaged axons in the CNS, however: (i) in adults, at least, their effectiveness is reduced if they are located at a distance from the cell bodies giving rise to regenerating axons; (ii) in some circumstances exposure to a peripheral glial environment may affect the capacity of regenerating axons to recognize appropriate target cells in the CNS neuropil.     

头孢噻肟钠聚合物测定实验条件的改进

目的:对中国药典收载的头孢噻肟钠聚合物测定条件进行改进。 方法 :采用高效液相色谱法 ,以Sephadex G- 10色谱柱 4 2 cm× 1.3cm对 6批样品进行分析 ,分别进样 5 0μl和 2 0 0μl,按外标法计算聚合物的量。结果:头孢噻肟钠在 10～ 6 0 μg/m l范围内线性关系良好 (r=0 .9995 ) ,高中低浓度的加样回收率分别为 10 0 .2 %、10 0 .4 %、99.7% ;RSD分别为 1.7%、1.5 %、1.9% (n =3)。该方法与药典方法比较 ,差异无统计学意义 (P >0 .0 5 )。 结论:本方法简便、快速、可行 ,具有实用价值     

Calculation of Hydrolytic Rate Constants of Poly(ortho ester)s from Molecular Weights Determined by Gel Permeation Chromatography

Purpose. To obtained rate constants from weight-averaged (M_w) or z-averaged (M_z) molecular weights for polymers of Schule-Flory distribution and undergoing random scission. These constants were compared with those obtained by parallel ¹HNMR studies. Methods. The hydrolysis of two poly(ortho ester)s were followed by ¹HNMR and gel permeation chromatography (GPC). Results. Equations to convert number-averaged (M_n), M_w and M_z into fraction of backbone remaining (f_c) were derived. First-order hydrolytic rate constants of two poly(ortho ester)s; DETOSU-HD and DETOSU-CDM were calculated using these relationships. The rate constants calculated from ¹HNMR, M_z and M_w were 0.215, 0.218 and 0.182 hr^–1, respectively, for DETOSU-CDM and 0.152, 0.086 and 0.038 hr^–l for DETOSU-HD. The large discrepancy in the rates determined by ¹HNMR and GPC in the latter case was attributed to that the detector response (refractive index) of the monomers was lower than that of the high molecular weight polymer. The difference is small in the case of DETOSU-CDM, and the rates calculated from GPC data were comparable or nearly identical to that obtained from ¹HNMR data. Conclusions. Although GPC can yield rapid and valuable kinetic data for the degradation of biodegradable polymers, the system, however, must be carefully calibrated to account for the variations in Mark-Houwink coefficients and in the response of the mass detector between the high and low MW polymers.     

硫杂蒽酮类光引发剂的合成

合成了12种烷基、烷氧基和硝基取代的硫杂蒽酮类化合物。其中,三种烷氧基取代的硫杂蒽酮是用相转移催化法制得的。几种新的化合物,经红外光谱、质谱和元素分析等方法鉴定,确证了其结构。测定了化合物的紫外吸收光谱。结果表明,硫杂蒽酮类化合物的2-位上是斥电子基时,其最大吸收波长要向红移动;若2-位上是吸电子基时则向紫移动。     

Simple Trends in the Methylene and α‐Substituent Regions of NMR Spectra of Vinyl Polymers

Summary: Chemical shift trends in the methylene and α substituent regions of ¹³C NMR spectra of vinyl polymers have been analyzed in terms of a three‐state rotational isomeric states (RIS) model and the γ‐gauche effect. In this framework, it has been demonstrated that the three sequencing rules observed for poly(propylene) can also be expected to work for many other vinyl polymers. The first two rules, justified in terms of the conformational perturbability of stereosequences, turn out to be respected by a considerable number of NMR spectra. On the other hand, the same spectral data are in substantial disagreement with the third rule. An explanation is proposed for this breakdown.

Sketches of the three conformations expected for rotation on the two prochiral bonds flanking the methine carbon of a vinyl polymer.     

Computer Simulations of the “Hairy Rod” Model

Summary: Using extensive Molecular Dynamics simulations we study the behavior of very rigid polyelectrolytes with hydrophobic side chains that are known to form cylindrical micelles in aqueous solution. We investigate the stability of such micelles with respect to hydrophobicity, Coulomb interaction, and micellar size. We show that for the parameter range relevant for poly(p‐phenylene sulfonate)s (PPP) one finds a stable finite micellar size close to the experimental parameter region. We also point out that our model has some similarities to DNA solutions with added condensing agents, hinting to the possibility that the size of DNA aggregates is under certain circumstances thermodynamically limited.

DNA‐like morphologies of the polyelectrolytes.     

Synthesis of Diene‐Functionalized Macromonomers via Functionalization with Hexa‐1,3,5‐triene

The reaction of poly(styryl)lithium (PSLi) with hexa‐1,3,5‐triene (HXT) was studied as a route to diene‐functionalized macromonomers. When PSLi was reacted with 1.5 molar equivalents of HXT for 2.5 h at ?10 °C in toluene, it was found that the diene‐functionalized macromonomer was obtained in high yield; however, oligomerization of the HXT was observed by matrix‐assisted laser absorption ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). Oligomerization was eliminated by running the reaction with only 1.2 molar equivalents of HXT to PSLi and allowing the reaction to run for 15 min at ?10 °C in toluene. The resulting polymer exhibited high diene chain‐end functionality and no oligomerization was observed by MALDI‐TOF MS. ¹³C NMR spectroscopy and the attached‐proton test (APT), along with calculated chemical shifts, showed the presence of both the 1,2‐ and 1,4‐addition chain‐end structures. Further analysis by the reaction of the functional polymer with maleic anhydride indicated that 18 wt.‐% of the product was unreactive, either because of a 1,4‐addition chain‐end structure or a nonfunctional polymer. The structure of the maleic anhydride‐modified polymer was determined by MALDI‐TOF MS and ¹³C NMR spectroscopy. Preliminary work on the reactivity of the diene‐functionalized macromonomers was performed by the addition of a large excess of PSLi to a solution of macromonomer followed by characterization by size‐exclusion chromatography (SEC).

The formation of hexa‐1,3,5‐triene‐functionalized polystyrenes and their reaction with maleic anhydride.     

Formation of Regular Hole Pattern in Polymer Films

Ordered macroporous materials recently have attracted much attention. A method that utilizes the condensation of monodisperse water droplets on a polymer solution is proposed for the preparation of honeycomb microporous films. Our results show that it is a general method that can be used for patterning a wide range of polymers. The presence of water vapor and polymer is necessary for the formation of regular holes in films. The formation of hexagonal packing instead of other kinds of packing takes place because the hexagonal packing has the lowest free energy. The formation mechanisms of regular hole pattern and imperfections in the hexagonal packing are proposed.

Hexagonal hole structures in a PMMA film.